1) SLIP TYPE ELEVATORS "Y" SERIESVarco BJ "Y" Series elevators are conventional slip type elevators for handling tubing and small casing. There are 7 types ranging from 20 to 200 ton capacity and covering pipe sizes from 1.05 to 7

1) Drill Pipe SlipsVarco design SDS, SDML, and SDXL Rotary Slips are for use in API standard insert bowls. Featuring better contact and distribution of load on drill pipe thru a superior wraparound configuration and unique insert design, these slips

Standard Designs- 7500 x 2400 x 2000 mm - 8000 x 2400 x 2000 mm - 9000 x 2800 x 2200 mm - 10000 x 2800 x 2500 mm - 12000 x 2800 x 2500 mm

Liquid-gas separator can separate gas phase and liquid phase from the gas contained drilling liquid. In drilling process, after going through decompression tank into separation tank, the gas contained drilling fluid impacts the baffles with high speed, which breaks and releases the bubbles in liquid to realize separation of liquid and gas and improve drilling fluid density.

Centrifuge is one of the important equipment of solid control. It is mainly used for removal of tiny harmful solid phase in drilling fluid. It can be also used for centrifugal sedimentation, drying, and unloading etc.

JQB series shearing pump applies axial suction stucture, consisting of motor,pump seat, pump shell, impeller,shearing impeller and other components. Vee belt and mechanical compound seal guaruantee no leakage. There is a stainless turbine inside(whic

Centrifugal pump, also called as Sand Pump in oilfield, is designed and engineered to handle abrasive, viscous and corrosive fluids in drilling fluid or industrial slurry applications. The pump performance is matched by exceptional performance, high volume, high temperature capabilities, long service life, ease to maintenance, overall economy and greater savings.

NJ mud agitator is an important part of mud purification system. In general, each mud tank equips with 2 to 3 mud agitators installed on the circulation tank, which make impeller goes into certain depth under the liquid level by revolving shaft. The circulating drilling fluid is not easy to precipitate because of its stirring and the chemicals added can be mixed evenly and quickly. The adaptive environment temperature is -30~60℃.

ModelDS4 3/4 x 8DS4 3/4 x 10DS4 3/4 x 16Handling capacity (GPM)5496771098Motor (HP)0.70.750.75Screen (mesh)140-180 /40

ModelDS10x1DS10x2DS10x 3DS12x1DS12x 2DS12x 3Handling capacity (GPM)39679311906609691453Working Pressure (PSI)555555555555Motor (HP)0.70.70.70.70.70.7Screen Size(mesh)1800×600mm (120/40)

Vacuum degasser, also known as negative pressure degasser, is a special equipment for treatment of gas cut drilling fluids, able to quickly get rid of various gas intruding into the drilling fluid. Vacuum degasser plays an important role in recovering mud weight and stabilizing mud performance. It can also be used as a high-power agitator and applicable to all types of mud circulating and purification system.