Elevators

1) SLIP TYPE ELEVATORS "Y" SERIES

Varco BJ "Y" Series elevators are conventional slip type elevators for handling tubing and small casing. There are 7 types ranging from 20 to 200 ton capacity and covering pipe sizes from 1.05 to 7 5/8 inchese OD. They feature a four slip design which give an optimum contact on the pipe to prevent bttlenecking and gauge damage.  The Varco BJ "YC" type elevator is capable of handling dual tubing strings. All type "Y" series elevator operate with the latch lock combination for safety. The "MYC" and "YC" provide a 7" and the "HYC" a 10 1/2" of intert contact to grip your casing or tubing.

2) COLLAR TYPE ELEVATOR "A" SERIES

Center-latch elevators are for handling collar-type drill pipe, casing and tubing. All "A" type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position All "A" type elevators feature latch and safety latch lock combinations.

3) AUXILIARY ELEVATOR "S" SERIES

①Square Shoulder Center Latch Elevator (SSC Type)

l  Like all Varco products, the 100 and 150 ton SSC Elevators are distinguished by their innovative design, engineering excellence and metallurgical quality. These elevators are characterized by features which improve crew efficiency and reduce fatigue. 

Pipe can be stabbed straight into the SSC elevator. Varco's narrow profile latch design provides a wide, clear opening without obstruction, allowing crews to work more quickly.
Lifting and closing the Varco elevator requires a fraction of the force needed to lift the close other elevators, because the SSC is so well balanced.

An oversized hinge pin provides maximum distribution of load to minimize wear. All elevators are fully API rated. To assure individual quality, each elevator is pull-tested to 1 1/2 times rated load and then magnetic particle inspected before shipment.

The Varco SSC elevator is available in three frame sizes and can handle tubular goods ranging in size from 2 3/8 thru 8 5/8 inches.

②Square Shoulder Side Door Elevator (SSD Type)

A range of models are available to handle drill collar sizes from 6 3/4 thru 11 1/4 inches OD and casing sizes from 6 5/8 to 20 1/2 inches OD.

Varco Elevators hang at less of an angle than other elevators. This means that they require far less effort to lift and close, reducing crew fatigue and improving performance. Drill Collar or casing can be stabbed directly into Varco elevators and the tool's narrow profile latch design provides a wide, clear opening, without obstruction.

All Varco elevators are fully API Rated and meet Varco's tough standards for quality, and rugged dependability. 

③Varco Single Joint Center Latch Casing Elevator (SJC type)

SJC are available in models to handle casing sizes from 6 5/8 to 20 1/2 inches OD. Varco's tough standards for metallurgical quality and rugged dependability in the field ensure a long, trouble-free services life. The built-in safety latch and dependable spring operation allows simple, safe operation of the latch mechanism in all conditions.

Technical Specifications

Technical Specifications

Technical Specifications

Technical Specifications

Technical Specifications