|
Product Description
①Hydraulic Drill Pipe Tong Based on Varco Big Foot,The Iron Roughneck working principal, our Power Drilling Tong is a safer, more efficient system for tripping pipe. A combination of the proven Hydraulic spinning wrench and the hydraulic torque wrench, it provides fast, accurate stabbing and quick, controlled spin up. Pipe can be torqued to precise, consistent values without creating bending stresses in the drilling string. That alone can save you a lot of tool joints and drill pipe. Comparing to Varco Big Foot,The Iron Roughneck, our power tong is more compact, more easier to instal and operate and more less maintenance job required but with all perfect features of Big Foot being applied. By using such Power tong, Rig floow hazards casued by the spinning chain, the tongs and tongs lines are eliminated. The power tong is hydraulically powered, so speed control is smooth and variable. You can adjust for fast spin up of drill pipe or slow, controlled spin up for "walking-in" drill collars. This minimizes cross-threading, "thread burn" and permit proper spin up of the engaged threads- all crtitical factors in the longevity of expensive tool joints.A fully reversible feature permits pipe to be spun out intead of rotating out with the table, avoiding possible damage to the wall cake and eliminating hazardous floor conditions. To adjust the height of tong, one Hydraulic Hanger is designed. ②Hydraulic Casing Tong Our power casing tong is machined by feautures-combining of Eckel, weatherfold, and Farr designs as below Spec. ③Hydraulic Casing Tong
By introducing Eckel design, we developed our own Hydraulic Tubing tong with the following spec.
④Power Sucker Rod Tongs Power Sucker Rod Tongs are designed for quick make-up/break-out sucker rod from 5/8'' thru 1 1/8'' with Max. 1920 lb-ft make-up torque. ⑤Hydraulic Power Unit (HPU) Hydraulic Drill pipe tong, Hydraulic Casing tong and Hydraulic Tubing tong could get power from the same power station. The HPU has compact structure and strong adaptiveness.They are easy to operate and have been widely used. Drive Mode: Ex-proof Motor (50 HZ and 60 HZ) Traditional Motor (50 HZ and 60 HZ) Diesel Engine
Cooling Mode: No cooling device Air cooling Water cooling
Heating Mode No Heating device Electric Heating
Main Parameters
Power tong | ZQ203-125-I | ZQ203-100-I | ZQ203-100-II | ZQ230-100-III | ZQ162-50 | ZQ127-25 | Size Rang | in | 5~8 | 5~8 | 5~8 | 5~8 | 2 3/8~5 1/2 | 2 3/8~3 1/2 | mm | 127-203 | 127-203 | 127-203 | 127-203 | 85-162 | 65-127 | Max. Torque | lb-ft | 92,200 | 73,750 | 73,750 | 73,750 | 36,880 | 18,440 | kN.M | 125 | 100 | 100 | 100 | 50 | 25 | Rotating Speed (RPM) | Hi-Gear | 40 | 40 | 40 | 40 | 60 | 65 | Lo-Gear | 2.7 | 2.7 | 2.7 | 2.7 | 4.1 | 10.5 | Hydraulic system working pressure rated | psi | 2,900 | 2,400 | 2,400 | 2,400 | 2,320 | 1,740 | Mpa | 20 | 16.6 | 16.6 | 16.6 | 16 | 12 | Hydraulic system flow rate | LPM | 114 | 114 | 114 | 114 | 120 | 180 | GPM | 30 | 30 | 30 | 30 | 32 | 48 | Stroke of shifting cylinder | mm | 1,500 | 1,500 | 1,500 | - | 1,000 | 1,000 | in | 59 | 59 | 59 | - | 39.4 | 39.4 | Moving distance of tong | mm | - | - | - | 0-1,500 |
|
| in | - |
|
| 0-59 |
|
| Up-down distance of tong | mm |
|
| 0-485 | 0-800 |
|
| in |
|
| 0-19 | 0-31.5 |
|
| Weight | kg | 2,600 | 2,400 | 2,500 | 3,250 | 1,500 | 620 | lb | 5,730 | 5,290 | 5,510 | 7,165 | 3,310 | 1,360 | Overall Dimensions | mm | 1720*1050*1750 | 1700*1000*1400 | 1700*1000*1400 | 1750*1650*2050 | 1570*800*1190 | 1110*790*820 | in | 68*41*69 | 67*39*55 | 67*39*55 | 69*65*81 | 62*31*47 | 44*31*42 |
Technical Specifications Casing Tong | TQ178-16 | TQ340-20Y | TQ340-35 | TQ178-16Y | TQ340-35Y | Size Rang | in | 4~7 | 4~13 3/8 | 5 1/2~13 3/8 | 4~7 | 4~13 3/8 | mm | 101.6~178 | 101.6~340 | 139.7~340 | 101.6~178 | 101.6~340 | Hydraulic system working pressure | Mpa | 18 | 16 | 18 | 18 | 18 | psi | 2,610 | 2,320 | 2,610 | 2,610 | 2,610 | Hydraulic system flow rate | LPM | 114 | 114 | 114 | 114 | 114 | GPM | 30.1 | 30.1 | 30.1 | 30.1 | 30.1 | Max. Torque | Hi-Gear | lb.ft | 1,770~2,200 | 2,730 | 1,844~2,200 | 1,770~2,200 | 2,950~3,680 | KN.m | 2.4~3 | 3.7 | 2.5~3 | 2.4~3 | 4.0~5.0 | Mi-Gear | lb.ft | - | - | 4,420~5,530 | - | - | KN.M | - | - | 6.0~7.5 | - | - | Lo-Gear | lb.ft | 11,800 | 14,750 | 25,800 | 11,060~13,280 | 19,900~22,120 | KN.M | 16 | 20 | 35 | 15~18 | 27~30 | Rotating Speed | Hi-Gear | RPM | 54~79 | 50~80 | 60~86 | 54~79 | 80~98 | Mi-Gear | RPM |
|
| 21~30 |
|
| Lo-Gear | RPM | 9~13.1 | 6~14 | 2.6~5.3 | 8.5~12 | 12~16 | Overall Dimensions | mm | 1540*760*740 | 1520*850*670 | 1540*900*860 | 1500*750*680 | 1560*900*850 | in | 61*30*29 | 60*34*26 | 61*36*34 | 59*30*27 | 61*35*33.5 | Weight | lb | 1280 | 1234 | 1720 | 1250 | 1720 | Kg | 580 | 560 | 780 | 570 | 780 |
Technical Specifications Tongs | XYQ1.8 | XYQ3C | XYQ6B | XYQ12A | Pipe Range for Master tong | 1 7/8~2 3/8 | 2 3/8~3 1/2 | 2 7/8~4 1/2 | 2 7/8~5 9/16 | Pipe range for Back-Up Tong | - | 2 7/8~4 1/2 | 3 1/2~5 9/16 | 3 1/2~6 1/8 | Hi-Gear rated Torque (lb-ft) | 519 | 812 | 1,107 | 1,919 | Lo-Gear rated Torque (lb-ft) | 1,336 | - | - | 8,856 | Hi-Gear Max. Rotating Speed (RPM) | 100 | 100 | 85 | 68 | Lo-Gear Max. Rotating Speed (RPM) | 40 | 30 | 20 | 13 | Opening size of Master tong | 2 3/8 | 3 3/4 | 4 5/8 | 5 7/8 | Opening Size of Back-up tong | - | 4 9/16 | 5 11/16 | 6 1/4 | Rated working pressure (psi) | 1,430 | 1,430 | 1,573 | 1,573 | Max. Oil Supply (GPM) | 17.6 | 17.6 | 22 | 26.4 | Overall Dimensions (mm) | 543*334*404 | 733*420*550 | 850*480*600 | 1042*582*839 | Gross Weight (kg) | 87 | 160 | 240 | 485 |
Technical Specifications Model | PSRT-1300 | PSRT-1900 | Pipe Size of Back Tong | Sucker Rod 5/8''-1 1/8'', Tubing 1 7/8''-2 3/8'' | Sucker Rod 5/8''-1 1/8'' | Pipe Size of Back Tong | Sucker Rod 5/8''-1 1/8'', Tubing 1 7/8''-2 3/8'' | Sucker Rod 5/8''-1 1/8'' | High Speed Rated Torque lb-ft (N.M) | 500 (700) | 740 (1000) | Low Speed Rated Torque lb-ft (N.M) | 1300 (1800) | 1900 (2600) | Rated High Speed RPM | 104 | 98 | Rated Low Speed RPM | 40 | 32 | Rated Operation Pressure PSI (Mpa) | 1450 (10) | 1450 (10) | Power Supply Oil Flow Rate GPM(L/min) | 17(65) | 21(80) | Dimension L * W * H | 21.4'' * 13.1"* 15.9" | 26.4'' * 15.1"* 19.3" | Weight (Including Backup Tong) lbs (kg) | 231 (105) | 220 (100) |
Technical Specifications Model | YZB-120 | FYZB-120 | YZB-160 | YZB-160II | YD160-I | Rated Working Pressure (PSI) | 2400 | 2900 | 2400 | 2900 | 1900 | Flow Rate (GPM) | 31.7 | 31.7 | 31.7 | 42 | 31.7 | Oil Tank Volume (Gallon) | 155 | 236.7 | 155 | 158 | 150 | Drive Motor Power(HP) | 50 | 50 | 50 | 60 | 50 | Overall Dimensions (inch) | 61×42×45 | 74.8×63×57 | 68×43×49 | 84×51×65 | 68 x 49.2 x 48.8 | Weight (lb) | 2866 | 4620 | 2866 | 5280 | 2426 |
|
|
