Parts for Lanzhou LS Hook DG250
Hook | 103.05.00 |
Bail | 103.05.01 |
Shank | 103.05.05.01 |
Pin. bail | 103.05.03 |
Screw with head-holes | GB32.1-88 (M16x45) |
Wire | Ø1.5 |
Seal.oil | D7-1-67 (160x190x15) |
Retainer. seal | 103.05.05 |
Positioner | 103.05.06 |
Spring. positioner | 103.05.07 |
Bushing. barrel (upper) | 103.05.08 |
Support. bai1 | 103.05.30 |
Nut. thin | 103.04.09 |
Screw.hex soc. hd | GB70-85 (M12x25) |
Washer. spring | GB93-87 (12) |
Barrel (upper) | 103.05.11 |
Barrel (lower) | 103.05.12 |
Pin | 103.05.13 |
Spring. shank | 103.05.10 |
Spring. shank | 103.05.09 |
0-Ring | 103.05.14 |
|
|
Bushing. barrel (lower) | 103.05.15 |
Support. spring |
|
Key. lock | 103.04.18 |
Lock assembly | 103.04.01.00 |
Latch. tongue | 103.05.18 |
Plunger.tongue latch | 103.04.20 |
Spring tongue latch | 103.04.21 |
|
|
Arm. lower locking | 103.05.19 |
Pin. tongue | 103.05.20 |
Body | 103.05.21 |
Pin. cotter | GB91-86 (10X160) |
Nut.thin hex sloted | 103.05.22 |
Key.lock | 103.04.25 |
Plug | 103.04.34 |
Plate. I.D | 103.05.29 |
Screw | GB67-85 (M4X8) |
Plate. fixed | 103.05.28 |
Screw. hex soc hd | GB70-85 (M16x40) |
Washer. spring | GB93-87 (16) |
Nut.shank bearing | 103.05.05.02 |
Pin. link (lower) |
|
Pin. link (upper) | 103.05.27 |
Link | 103.05.26 |
Pin. link (upper) | 103.05.24 |
Ring. lock | 103.05.17 |
Ring. stop | 103.05.16 |
Bearing | 3-939 |
Grease fitting | GB1152-89 (M10X1) |
Plate. lock |
|
Screw |
|
|
|
Rod operating | 103K.04.10.00 |
Lock assembly | 103.04.01.00 |
0-Ring | D4-4-66 (28X3.5) |
Housing | 103.04.01.05 |
0-Ring | D4-4-66 (100X5.7) |
Spring. latch | 103.04.01.06 |
Spring. pawl | 103.04.01.07 |
0-Ring | D4-4-66 (90X5.7) |
Shaft. pawl | 103.04.03.00 |
Lever | 103.04.02.01 |
Shaft | 103.04.03.01 |
Lock block | 103.04.03.02 |
Pin | 103.04.03.03 |
Shaft. Latch | 103.04.02.00 |
Lever | 103.04.02.01 |
Shaft | 103.04.02.02 |
Latch | 103.04.02.03 |
Pin | 103.04.02.04 (8x35) |
Telephone
E-MAIL