Stabilizers

①Drilling Tool Stabilizers

 Technical Features：

• Material: AISI 4145H, AISI 4145H Mod, AISI      4340, AISI 4140-4142 and Non-magnetic.

• Size: Up to 36''

• String Stabilizers

  Near Bit Stabilizers

• Hard Facing

• As per API Spec. 7

• Stabilizer Type

Ø  Integral Spiral/Straight Blade Drill Stabilizers

Ø  Replaceable Sleeve Drill Stabilizer

Ø  Non-Rotating Drill Stabilizer

Ø  Float Valve Drill Stabilizer

Ø  Variable Diameter Drill Stabilizer

Ø  Unbalanced Spiral Blade Drill Stabilizer

Ø  Spherical Drill Stabilizer

②Integral Spiral Blade Stabilizer

 Integral Spiral Stabilizer is a one-piece tool made by AISI 4145H alloy steel and fully heat-treated to 285-341 Brinel Hardness number, and 54 Joules of minimum impact value. Three spiral blades have been designed to minimize the downhole torque, to reduce damage of the hole wall, and ensure the maximum fluid circulation. When drilling vertical holes, they shall be applied to reduce drift of drill bits and keep the drill bit straight downward. When drilling directional holes, they can increase, decrease or stabilize the tilt of the hole, to ensure the orientation of the hole, to ensure the quality of the well, and increase the drilling speed.

③Replaceable Sleeve Stabilizer

 Interchangeable Sleeve Stabilizers are made by AISI 4145H alloy steel and heat-treated to 285-341 Brinel Hardness number, and 54 Joules of impact value. For each body, a series of sleeves can be fitted with it; the body is constructed in two pieces, and jointed together by the sleeve.

④Sleeve Stabilizer

RECOMMEND SIZE OF INTEGRAL SPIRAL STABILIZER

RECOMMEND SIZE OF REPLACEABLE SLEEVE STABILIZER