|
| Description | Manufacturer Part No. | Quantity (2 Years) | | MUD GUARD (COMPLETE ASSEMBLY) RH, MG-600, ASSY, 3.50 CR, 5 INCH OUTLET CONNECTION WITH NEOPRENE (CR) RUBBER SEALS, DREST FOR 3-1/2 INCH OD DRILL, MANF: OTECO, P/N: 433613 |
| 4 | | END SEALS, NEOPRENE RUBBER COMPOUND FOR MG-600 MUD GUARD, 4-1/2 INCH DRILL PIPE, MANF: OTECO P/N 433635 |
| 4 | | VALVE,RESET RELIEF,3″”,MAKE:OTECO PRESSURE RANGE:1500 -5000 PSI,STD SERVICE W/3″” FIG1 |
| 4 | | MUD GUARD, COMPLETE ASSEMBLY, 4 INCH OUTLET CONNECTION WITH NEOPRENE (CR) RUBBER SEALS (STANDARD MATERIAL) FOR 4 INCH OD DRILL, MAKE: OTECO, P/N: 433657 |
| 4 | | MUD GUARD, COMPLETE WITH 4″ DISCHARGE OUTLET AND 4″ SEAL ( NEOPRENE). MODEL: MG-600, MAKE: OTECO, PART NO: 433614 |
| 4 | | MUD GUARD (COMPLETE ASSEMBLY) RH, MG-600, ASSY, 5.00 CR WITH 5″ DISCHARGE OUTLET WITH NEOPRENE (CR) RUBBER SEALS, DREST FOR 5 INCH OD DRILL PIPE, MAKE: OTECO, P/N: 433616 |
| 4 | | MUD GUARD, COMPLETE WITH 4″ DISCHARGE OUTLET MODEL: MG-600, MAKE: OTECO |
| 4 | | RELIEF VALVE, 3″ 1502, PRESSURE RATING: 3000-8000 PSI, MAKE: OTECO |
| 4 | | MUD GUARD (COMPLETE ASSEMBLY) MG-600, 4 INCH OUTLET CONNECTION WITH NITRILE (NBR) RUBBER SEALS 5 INCH OD DRILL PIPE, MAKE: OTECO, P/N: 433663 |
| 4 | | MUD GUARD (COMPLETE ASSEMBLY) MG-600, 4 INCH OUTLET CONNECTION WITH NITRILE (NBR) RUBBER SEALS 3-1/2 INCH OD DRILL PIPE, MAKE: OTECO, P/N: 433665 |
| 4 | | HAMMER WRENCH, 1-3/8″, MAKE: OTECO |
| 8 | | WIPER DRILL PIPE 2-3/8″ TYPE SINGLE, NATURAL RUBBER, 17″OD, OTECO, P/N: 251170123 | 251170123 | 4 | | WIPER DRILL PIPE 5″ X 17″ OD DUAL SPLIT, NATURAL RUBBER, OTECO, P/N: 251170150 | 251170150 | 218 | | WIPER DRILL PIPE 4″ TYPE SOLID DUAL, NATURAL RUBBER, 17″OD, MAKE: OTECO, P/N: 252173 | 252173 | 135 | | CLAMP FOR 3-1/2″ LINK F/ BALANCING STRAP P/N 280106 MAKE: BJ/OTECO, P/N: 26340 | 26340 | 4 | | BALANCING STRAP, MAKE: OTECO, P/N: 280102 | 280102 | 222 | | CLAMP FOR BALANCING STRAP 2-3/4″ LINKS, MFG: OTECO, P/N: 280103 | 280103 | 7 | | U BOLT FOR BALANCING STRAP 2-3/4″ LINK MFG: OTECO, P/N: 280104 | 280104 | 11 | | WIPER PIPE DUAL SPLIT TYPE, 17″OD X 3-1/2″ID FOR 3-1/2″ DRILL PIPE MAKE: VARCO/OTECO, P/N: 4-1400B | 4-1400B | 27 | | 17″ OD DUAL SPLIT NATURAL RUBBER DRILL PIPE WIPER, 2-7/8″ ID, OTECO |
| 3 | | WIRE LINE GUIDE ASSY F/DRILL LINE, MAKE: OTECO, P/N: G-10-S | G-10-S | 4 | | ROLLER COMPLETE ASSY F/WIRE LINE GUIDE ASSY, MAKE: OTECO, P/N: 431111 | 431111 | 4 | | SHAFT, SLEEVE, SPACERS(2), LOCK NUT(2) <(>&<)> BEARING (2) F/WIRE LINE GUIDE ASSY, MAKE: OTECO, P/N:431112 | 431112 | 4 | | WRENCH HAMMER (BW5063) MAKE: OTECO, P/N: 425063 | 425063 | 9 | | HAMMER WRENCH FOR 3/4″ STUD BW5075, MAKE: OTECO, P/N: 425075 | 425075 | 12 | | HAMMER WRENCH 1-7/16 MAKE: OTECO, P/N: 425088 | 425088 | 12 | | HAMMER WRENCH BW-5163 2-9/16″ NUT, 1-5/8″ STUD MFG. OTECO, P/N: 425163 | 425163 | 10 | | WRENCH HAMMER (OTECO BW5175) F/1-3/4″ STUD, P/N: 425175 | 425175 | 12 | | HAMMER WRENCH 1-15/16 MAKE: OTECO |
| 3 | | HAMMER WRENCH 1-13/16 MAKE: OTECO |
| 17 | | HAMMER WRENCH 1-9/16 MAKE: OTECO |
| 3 | | WRENCH IMPACT BOX END FOR NUT SIZE:1-5/8″ (BW5100) MAKE: OTECO, P/N: 425100 | 425100 | 4 | | WRENCH IMPACT BOX END SIZE 1-13/16″, FOR 1-1/8″ NUT,(BW5113) OTECO, P/N: 425113 | 425113 | 4 | | WRENCH IMPACT BOX END SIZE: 2″ (BW5125) MAKE: OTECO, P/N: 425125 | 425125 | 4 | | WRENCH IMPACT BOX END SIZE: 2-3/16″ (BW5138) MAKE: OTECO, P/N: 425138 | 425138 | 4 | | WRENCH IMPACT BOX END SIZE: 2-15/16″ (BW5188) MAKE: OTECO, P/N: 425188 | 425188 | 4 | | STRIKING WRENCH, STUD SIZE: 2-1/2″, NUT SIZE: 3-7/8″, HEAD DIA: 5-1/4″, 6 POINT STRAIGHT FOR TOOLS, MAKE: OTECO |
| 3 | | STRIKING WRENCH, STUD SIZE: 2-1/4″, NUT SIZE: 3-1/2″, HEAD DIA, 4-7/8:, 6 POINT STRAIGHT FOR TOOLS, MAKE: OTECO |
| 4 | | METAL SEAL BRACKETS, FOR MUD BUCKET, MODEL: MG-600, MAKE: OTECO, P/N: 433606 | 433606 | 4 | | NUTS & BOLTS, FOR MUD BUCKET, MODEL: MG-600, MAKE: OTECO, P/N: 433607 | 433607 | 4 | | BALANCING STRAP ASSEMBLY, FOR UP TO 2-3/4″ LINKS USED ON 150, 250, 350 TONS BALES, MAKE: OTECO, P/N: 280101 | 280101 | 4 | | BALANCING STRAP ASSEMBLY, FOR UP TO 3-1/2″ LINKS USED ON 500 TONS BALES, MAKE: OTECO, P/N: 280105 | 280105 | 4 | | GAUGE, PRESSURE, 8SD, PSI, S10K, 2.06-10K, RJ MODEL 8, WITH STANDARD DUAL DIAL FACE, 0-10,000 PSI / 0-700 KG/CM2, STANDARD SERVICE, 2-1/16″ -10,000 API FLANGE (BX-152) RING GROOVE SCHEDULE B : 9026200000, MAKE: OTECO, P/ | 382061 | 4 | | GAUGE, PRESSURE, PG 8 SAND, 2″ FIG1502 SSUB CONNECTION, MALE, SOUR GAS, MODEL: 8, MAKE: OTECO |
| 4 | | REPAIR KIT MAJOR F/ 3″ RESET RELIEF VALVE P/N 143216 MFG. OTECO |
| 9 | | TYPE RR PRESSURE INDICATOR FOR OTECO RESET RELEIF VALVE, MAKE: OTECO, P/N: 142418 | 142418 | 4 | | TYPE RR ADJUSTING NUT FOR OTECO RESET RELEIF VALVE, MAKE: OTECO, P/N: 301786 | 301786 | 4 | | TYPE RR ADJUSTING STUD FOR OTECO RESET RELEIF VALVE, MAKE: OTECO, P/N: 142414 | 142414 | 4 | | TYPE RR SOCKKET HEAD CAP SCREW FOR OTECO RESET RELEIF VALVE, MAKE: OTECO, P/N: 143310 | 143310 | 4 | | SUB WITH FIG 1502 FEMALE INLET FOR RESET RELIEF VALVE, MAKE : OTECO, P/N: 143014 | 143014 | 4 | | 0-6000 PSI GAUGE ASSEMBLY MOD.6 WITH 2″ FIG 1502 UNION END MAKE OTECO, MISC. TRNSMTRS <(>&<)> SENSORS, P/N: 366431 | 366431 | 8 | | PRESSURE RELIEF VALVE 3″, 5K, FIG 1502 MAKE: OTECO, P/N: 130367 | 130367 | 4 | | SEAL SET, END, 4″ FOR MG-600 MUD GUARD, MAKE: OTECO, P/N: 433634 | 433634 | 4 | | 5″ SEAL ( NEOPRENE) FOR 4” DISCHARGE OUTLET FOR MG-600 MUD GUARD, MAKE: OTECO, P/N: 433636 | 433636 | 4 | | 4″ SEAL (NEOPRENE) FOR 4” DISCHARGE OUTLET MG-600 MUD GUARD, MAKE: OTECO |
| 4 | | PRESSURE GAUGE, ASEISMIC, 0-10000PSI, FLANGE TYPE 2-1/16″, OTECO, PG8, FLANGE, 2.06-10K, RJ, BX-152 FOR MUD PUMP SET, (BZ244.00) MODEL: HHF-1600HL, MAKE: HH |
| 7 | | SPRING SAFETY VALVE, 3″-1502 10000PSI, MAKE: OTECO, FOR MUD PUMP, MODEL: HHF-1600, MAKE: HH |
| 4 | | SEAL SET, END, NITRILE (NBR) RUBBER COMPOUND FOR MG-600 MUD GUARD, 3-1/2″ OD DRILL PIPE, MAKE: OTECO, P/N: 433643 | 433643 | 4 | | SEAL SET, END, NITRILE (NBR) RUBBER COMPOUND FOR MG-600 MUD GUARD, 5″ OD DRILL PIPE, MAKE: OTECO, P/N: 433646 | 433646 | 4 | | RESET, CRANK, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142442 | 142442 | 4 | | REPAIR KIT, MAJOR, SEALS AND PISTON, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143221 | 143221 | 17 | | REPAIR KIT, LINKS, PINS AND CRANK W/BEARINGS, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143222 | 143222 | 18 | | COVER, BEARING, BONNET, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142425 | 142425 | 3 | | O-RING, RESET LEVER, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142439 | 142439 | 3 | | HANDLE, RESET, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143186 | 143186 | 3 | | BEARING, CRANK, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142422 | 142422 | 4 | | BUTTON, RELEASE, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143320 | 143320 | 3 | | SPRING, RELEASE BUTTON, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142407 | 142407 | 3 | | SHAFT, RELEASE BUTTON, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143330 | 143330 | 3 | | BUSHING, RELEASE BUTTON, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142408 | 142408 | 3 | | ROLLER, RESET CRANK, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142440 | 142440 | 3 | | ROD, SPRING GUIDE, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142340 | 142340 | 3 | | KEEPER, SPRING, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142412 | 142412 | 3 | | SPRING, RESET CRANK, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142413 | 142413 | 3 | | SPRING, LOAD, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143058 | 143058 | 6 | | BEARING ASSEMBLY, BONNET, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142436 | 142436 | 3 | | BEARING, BONNET, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142424 | 142424 | 4 | | PLUG, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142431 | 142431 | 4 | | SEAL, RETAINER, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 143035 | 143035 | 4 | | BEARING, UPPER LINK & PISTON, FOR 3″ RESET RELIEF VALVE, 3000-8000 PSI, MAKE: OTECO, P/N: 142423 | 142423 | 4 | | BEARING FOR KICK BACK ROLLER, MODEL : G-20, MAKE: OTECO, P/N: 431216 (2EA=SET) |
| 4 | | BEARING FOR KICK BACK ROLLER,MODEL: G-20, MAKE: OTECO, P/N: 431216 |
| 24 | | SEAL, TEFLON, MIDLE 3″ RESET, FOR RELIEF VALVE, MODEL: 131380, MAKE: OTECO, P/N: 302689 | 302689 | 5 | | SEAL, TEFLON, LOWER 3″ RESET, FOR RELIEF VALVE, MODEL: 131380, MAKE: OTECO, P/N: 302686 | 302686 | 5 | | G20-H(R) TURN BACK ASSY -DRILLER SIDE, FOR NOV DRAWWORKS, MODEL: NOV 1320 UDBE, MAKE: OTECO, P/N: 431202 | 431202 | 6 | | G20-H(L) TURNBACK ASSY- OFFDRILLERSIDE, FOR NOV DRAWWORKS, MODEL: NOV 1320 UDBE, MAKE: OTECO, P/N: 431203 | 431203 | 6 | | U BOLT SET( 2 U BOLTS, 4 NUTS AND WASHERS), FOR NOV DRAWWORKS, MODEL: NOV 1320 UDBE, MAKE: OTECO, P/N: 431215 | 431215 | 6 |
|
|
Telephone
E-MAIL