Drilling rig parts list

No p/n	The name of the object. The content of the work. Name and brief technical description of the materials used to perform the work, purchased components, equipment, spare parts, etc.	Units. ism.	Quantity	price per unit,




1	2	3	4	5	6	7	8	9
	Total for section 5:
6.	Repair of DEMCO 4″ x 5000 psi manifold high-pressure gate valves
6.2	Materials for work:
6.2.1	Stem seal assembly p.n. J001951-001	state.	11.00
6.2.2	Saddle assembly p.n.J002207-0XX	state.	11.00
6.2.3	Cap seal p.n. J005526-433 (Buna)	state.	22.00
6.2.4	Cap seal p.n. J005520-361 (Buna)	state.	22.00
6.2.5	Shiber p.n. J001926-00X	state.	11.00
6.2.6	Bearing cage p.n. 19108-1	state.	2.00
6.2.7	Thrust bearing p.n. 5931-09	state.	2.00
6.2.8	Rod adapter p.n. 630301-01	state.	1.00
6.2.9	Stuffing box sleeve p.n. 140143-01-01-11	state.	1.00
6.2.10	Flange seal p.n. 21793-11	state.	4.00
6.2.11	Saddle p.n. 140137-01-71-2 HT608301	state.	8.00
6.2.12	O-ring p.n. 140146-02-01-03	state.	16.00
6.2.13	O-ring p.n. 140146-03-01-03	state.	16.00
	Total for section 6:
9.	Repair of plunger pumps of the air defense station BD-30 “Bear Pump & Equipment, Ink.” 2pcs. (operating time 3816 hours)
9.2	Materials for work:
9.2.1	Slider axle seal cover strip p.n. W141B0624200	state.	6.00
9.2.2	Slider axle seal cover p.n. W94111000103	state.	1.00
9.2.3	Hexagon bolt for lid p.n. B9101A0610A1	state.	12.00
9.2.4	Slider trunnion oil seal p.n. B94111000103	state.	12.00
9.2.5	Slider axle deflector p.n. B123A0617800	state.	2.00
9.2.6	Oil seal crankshaft p.n. B94111000134	state.	2.00
9.2.7	Crankcase cover gasket p.n. V620B0625400	state.	2.00
9.2.8	Valve seat in suction and discharge lines p.n. B322B0824400	state.	12.00
9.2.9	Valves in the suction and discharge lines p.n. B320B0792300	state.	12.00
9.2.10	Valve springs in the suction and discharge lines p.n. B334B0634701	state.	12.00
9.2.11	Gasket of the valve cover in the discharge line (synthetic) p.n. B619A0608403	state.	12.00
9.2.12	Gasket of the valve cover in the discharge line (copper) p.n. B619A0608403-1	state.	12.00
9.2.13	Valve stopper in the discharge line p.n. B370B0727700	state.	3.00
9.2.14	Cylinder head and valve cover in the discharge line p.n. B317B0727600	state.	1.00
9.2.15	Stuffing box flange stud p.n. B824A0155022	state.	4.00
9.2.16	Cylinder head nozzle p.n. B367C0625701	state.	1.00
9.2.17	Stuffing box gasket (spirally wound gasket) p.n. B622B0647503	state.	6.00
9.2.18	Stuffing box packing without lubrication (steel) for piston at 1,250 p.n. B337B0644300	state.	3.00
9.2.19	Tapering sleeve (cast iron) for 1.250 inch piston p.n. B341B0720503	state.	3.00
9.2.20	1.250″ square piston seal kit	state.	6.00
9.2.21	Piston, nickel-based alloy coating (colmonoy) 1.250 inch piston p.n. B353B0657603	state.	6.00
9.2.22	Oil seal collar (cast iron) for 1.250″ piston, square seal p.n. B339B0720903	state.	3.00
9.2.23	V-belt 5VX900 SPBX2280	state.	6.00
9.2.24	Mobil 600XP150 Oil (MobilGear 629)	l	30.00
9.2.25	Hydraulic filter element, 22 microns, length 8″, filler No. 9, setting 10/17/22 B(X), fineness of filler filtration (cell size) 22-micron Cameroon p.n. 2762149-03-03	state.	2.00
9.2.26	Filter element “Donaldson” P165876 10 microns	state.	2.00
	Total for section 9:
10.	Inspection and repair of cementing unit systems
10.1	Repair of high-pressure valves of the cementing manifold ANSON 2″ PLUG VALVE (COMPACT) FIG 1502 Miff ENDS – STANDARD p.n A15561 CWP 15000 psi
10.1.2	Materials for work:
10.1.2.1	Repair kit for plug valve ANSON 1″ COMPACT PLUG VALVE 2″ FIG 1502 MxF CWP 15000 psi p.n. 22809	state.	4.00
10.1.2.2	Repair kit for plug valve ANSON 2″ PLUG VALVE (COMPACT) FIG 1502 MxF ENDS CWP 15000 psi p.n.22810	state.	15.00
10.1.2.3	Repair kit for Chiksan Swivel Joints FMC Technologies MODEL 2″LS10, LS15 p.n. 3139666	state.	10.00
10.1.2.4	Chiksan Swivel Joints CWP-10000psi ANSON p.n. 2F Repair Kit	state.	10.00
11.	Repair of universal preventer “HYDRIL” 135/8″ x 5000psi
11.2	Materials for work
11.2.1	Sealing element for universal preventer GL 13-5/8 – 5000psi Part. No.3105077 (46823-MR)	state.	1.00
11.2.2	Ring Part. No. 48728	state.	1.00
11.2.3	Part head seal. No. 50084	state.	1.00
11.2.4	Part head gasket. No. N.40912	state.	1.00
11.2.5	Ring Part. No. 46826	state.	2.00
11.2.6	U-seal Part. No. 46825	state.	1.00
11.2.7	Ring Part. No. 40914	state.	2.00
11.2.8	U-shaped seal, internal part. No 40913 (0135-40913)	state.	1.00
11.2.9	Ring Part. No 41480	state.	2.00
11.2.10	U-shaped seal, lower part. No 41479	state.	1.00
11.2.11	Ring Part. No 1900001-473	state.	2.00
11.2.12	Ring Part. No 46828 (0135-46828)	state.	2.00
11.2.13	U-seal Part. No. 46827 (0135-46827)	state.	1.00
11.2.14	Ring Part. No. 1900001-328	state.	26.00
11.2.15	Piston Part. No. 1002405	state.	1.00
11.2.16	Screw Part. No. 1002415	state.	12.00
11.2.17	Plate Part. No. 1002439	state.	1.00
11.2.18	Screw Part. No. 1920026-08007	state.	6.00
11.2.19	Sealing ring R-63 (RX-63), low carbon steel	state.	1.00
11.2.20	Hydraulic oil MOBIL DTE -10	l	80.00
11.2.21	Mobil Lubricant – EP2	kg	18.00
11.2.22	Paint two-component oil-chemically resistant red	kg	10.00
11.2.23	Two-component oil-chemically resistant primer	kg	5.00
11.2.24	Solvent	l	7.00
11.2.25	Linen rags	kg	7.00
	Section 11 total:
12.	Repair of the Stewart & Steewenson CIW “U” 13-5 / 8″ shear preventer – 5000 psi.
12.2	Materials for work
12.2.1	Non-return valve Part. No M517988	state.	2.00
12.2.2	Ring Part. No 012469-24 (12469-24)	state.	3.00
12.2.3	Ring Part. No 018586-01 (18586-01)	state.	3.00
12.2.4	Oil seal Part. No 212741-36-00-01 (11741-36)	state.	2.00
12.2.5	Ring	state.	4.00
12.2.6	Flange seal Part.No 644197-03-00-01	state.	2.00
12.2.7	Ring Part. No 702640-45-51	state.	6.00
12.2.8	Ring Part. No 018492-90 (18492-90)	state.	4.00
12.2.9	Cuff Part. No 710538	state.	3.00
12.2.10	O-ring Part. No 212741-34-00-01 (11741-34)	state.	3.00
12.2.11	Ring Part. No 702645-33-71 (702640-33-71)	state.	3.00
12.2.12	Ring Part. No 702645-32-81	state.	6.00
12.2.13	Ring Part. No 702645-33-31 (702640-33-31)	state.	6.00
12.2.14	Ring Part. No 702645-34-61 (702640-34-61)	state.	6.00
12.2.15	Ring Part. No 702645-42-51 (702640-42-51)	state.	6.00
12.2.16	Ring Part. No 702645-33-81 (702640-33-81)	state.	6.00
12.2.17	Ring Part. No 702645-23-21 (702640-23-21)	state.	10.00
12.2.18	Nipple Part. No 017454-08	state.	2.00
12.2.19	Part stub. No 017454-09	state.	2.00
12.2.20	Sealing packing Part. N 007650-25	state.	14.00
12.2.21	Washer Part. No 689523-01	state.	4.00
12.2.22	Part retaining ring. No 018572-85	state.	4.00
12.2.23	Wear ring P/N 049223-01	state.	2.00
12.2.24	Knife seal Part.No 644435-01-00-01	state.	1.00
12.2.25	Cutting insert Part.No 644581-01-00-01	state.	1.00
12.2.26	Cutting insert Part.No 644581-02-00-01	state.	1.00
12.2.27	Top seal Part. N 644223-01-00-01	state.	2.00
12.2.28	Packer Part. No 46751-01-00-01	state.	2.00
12.2.29	Packer Part. No 46752-01-00-01	state.	2.00
12.2.30	Sealing ring R-63 (RX-63), low carbon steel	state.	1.00
12.2.31	Hydraulic oil MOBIL DTE -10	l	60.00
12.2.32	Mobil Lubricant – EP2	kg	18.00
12.2.33	Paint two-component oil-chemically resistant red	kg	10.00
12.2.34	Two-component oil-chemically resistant primer	kg	5.00
12.2.35	Solvent	kg	7.00
12.2.36	Linen rags	kg	7.00
	Total for section 12:
13.	Repair of spot preventer (double) HYDRIL GL 13 5/8″ – 5000 psi.
13.2	Materials for work
13.2.1	Saddle Part. No 3100787	state.	2.00
13.2.2	Part retaining ring. No 3100783	state.	2.00
13.2.3	Ring Part. No 1900001-458	state.	3.00
13.2.4	Retaining ring Part. No 1920012-958	state.	3.00
13.2.5	Ring Part. No 1900001-383	state.	3.00
13.2.6	Screw Part. No 3101976-2	state.	10.00
13.2.7	Ring Part. No 1900001-226	state.	16.00
13.2.8	Retaining ring Part. No 1920012-226	state.	16.00
13.2.9	Spring Part. No 3100062-5	state.	16.00
13.2.10	Sealing sleeve Part. No 3103808	state.	10.00
13.2.11	Ring Part. No 1900001-335	state.	10.00
13.2.12	Ring Part. No 1900001-215	state.	10.00
13.2.13	Bearing Part. No 3100808	state.	10.00
13.2.14	Bearing Part. No 3101152	state.	10.00
13.2.15	Washer Part. No 3101783-2	state.	10.00
13.2.16	Part lid seal. No 3100782	state.	4.00
13.2.17	Oil seal Part. No 3100236-3	state.	4.00
13.2.18	Spacer ring Part. No 3100244-3	state.	4.00
13.2.19	Part retaining ring. No 3101869-3	state.	4.00
13.2.20	Seal Part. No 3101789-6	state.	4.00
13.2.21	Seal Part. No 3101789-9	state.	4.00
13.2.22	Ring Part. No 1900001-235	state.	10.00
13.2.23	Ring Part. No 1900001-232	state.	20.00
13.2.24	Plastic Ring Part. No 3100233-3	state.	5.00
13.2.25	Ring Part. No 3100234-3	state.	5.00
13.2.26	Non-return valve Part. No 3103199	state.	4.00
13.2.27	Plastic sealant Part. No 3100453	state.	4.00
13.2.28	Screw Part. No 1900056-1616	state.	4.00
13.2.29	Ring Part. No 1900001-215	state.	10.00
13.2.30	Piston seal Part. No 3101789-10	state.	8.00
13.2.31	Ring Part. No 1900001-450	state.	6.00
13.2.32	Ring Part. No 1900001-454	state.	5.00
13.2.33	Part retaining ring. No 1900102-163	state.	5.00
13.2.34	Spacer ring Part. No 3100244-5	state.	5.00
13.2.35	Oil seal Part. No 3101789-9	state.	5.00
13.2.36	Dirt remover Part. No 3100225-1	state.	5.00
13.2.37	The top seal of the die is 5″ Part. No 3101477	state.	2.00
13.2.38	Packer dies 5″ Part. No 3101474-1 ( 3101470-10)	state.	2.00
13.2.39	Plate packer 3-1/2″ – 6″ Part. No 3104438 ( 3112126 )	state.	2.00
13.2.40	The top seal of the die is 3-1/2″ – 6″ Part. No 3101477	state.	2.00
13.2.41	Stem 10″ p.n.3100096	state.	4.00
13.2.42	Piston assembly p.n.3100094	state.	4.00
13.2.43	Screw p.n.1920047-10014	state.	40.00
13.2.44	Mechanical stopper p.n. 3100096	state.	4.00
13.2.45	Screw p.n1900044-12046	state.	20.00
13.2.46	Screw p.n.1900042-8010	state.	40.00
13.2.47	Sealing ring R-63 (RX-63), low carbon steel	state.	1.00
13.2.48	Hydraulic oil MOBIL DTE -10	l	60.00
13.2.49	Mobil Lubricant – EP2	kg	18.00
13.2.50	Paint two-component oil-chemically resistant red	kg	20.00
13.2.51	Two-component oil-chemically resistant primer	kg	5.00
13.2.52	Solvent	kg	15.00
13.2.53	Linen rags	kg	10.00
	Section 13 total:
14.	Repair divertor HYDRIL 21 1/4 -2000 psi
14.2	Materials for work
14.2.1	Packing unitp/n 1003273-3	state.	1.00
14.2.2	Head gasket p/n 37377 (1004922)	state.	1.00
14.2.3	U-seal upper p/n 37379	state.	2.00
14.2.4	U-seal lower p/n 37378	state.	2.00
14.2.5	U-seal inner p/n 37380	state.	2.00
14.2.6	O-seal, body sleeve p/n 37381	state.	1.00
14.2.7	Sealing ring R-73 (RX-73), low carbon steel	state.	1.00
14.2.8	Hydraulic oil MOBIL DTE -10	l	120.00
14.2.9	Mobil Lubricant – EP2	kg	18.00
14.2.10	Paint two-component oil-chemically resistant red	kg	15.00
14.2.11	Two-component oil-chemically resistant primer	kg	7.00
14.2.12	Solvent	kg	12.00
14.2.13	Linen rags	kg	10.00
	Total for section 14:
15.	Repair of hydraulically controlled ball valves of flow lines of the Valtor Offshore A \ S 2000psi divertor
15.2	Materials for work:
15.2.1	Repair kit of divertor outlet valve, p / n according to the results of fault detection	K-t	2.00
15.2.2	Mobilux EP 2	kg	18.00
15.2.3	Sealing ring, low-carbon steel, standard size to be specified according to the results of defect detection	state.	1.00
	Total for section 15:

LastNOV equipment partsNextCrossover Sub