TSC SOUTHWEST NEW STYLE MODULE FOR NATIONAL 12-P-160 Fluid end parts list
| ITEM | PART NUMBER | DESCRIPTION | QTY/PUMP |
| TS-8476-4A | FLUID END MODULE COMPLETE ASSEMBLY | 3 |
| 1 | TS-FEM12PDISSWNS | STUDDED FLUID END DISCHARGE (INCLUDE 2-8) | 3 |
| 2 | TS-12PDISSWNS | DISCHARGE MODULE ONLY | 3 |
| 3 | TS-12P160PFS | STUD, POWER FRAME | 30 |
| 4 | TS-8P80TRSN | NUT, POWER FRAME STUD | 30 |
| 5 | TS-12P160DSUCS | STUD, DISCHARGE TO SUCTION MODULE | 18 |
| 6 | TS-PEP55 | NUT, DISCHARGE TO SUCTION STUD | 18 |
| 7 | TS-12PTRSSW | STUD, THREADED RING | 36 |
| 8 | TS-12P160TRSN | NUT, THREADED RING STUD | 36 |
| 9 | TS-FEM12PSUCSWNS | STUDDED FLUID END SUCTION (INCLUDE 10-12) | 3 |
| 10 | TS-12PSUCSWNS | SUCTION MODULE ONLY | 3 |
| 11 | TS-12PTRSSW | STUD, THREADED RING | 36 |
| 12 | TS-12P160TRSN | NUT, THREADED RING STUD | 36 |
| 13 | TS-12PCAPSW | CAP, THREADED (SCREW GLAND) | 6 |
| 14 | TS-12PFLGSW | RING, THREADED (THREADED FLANGE) | 6 |
| 15 | TS-12PVCSWNS | PLUG, VALVE COVER | 6 |
| 16 | TS-SW119 | SEAL, VALVE COVER PLUG – RUBBER | 6 |
| 17 | TS-12PVGASWNS | ASSEMBLY, VALVE GUIDE | 6 |
| 18 | TS-50C125KFCYB | SCREW, VALVE GUIDE | 12 |
| 19 | TS-PZ789VGI | BUSHING, VALVE GUIDE | 6 |
| 20 | TS-PEP70 | PIN, DOWELL | 6 |
| 21 | TS-1290344 | GASKET, WEAR PLATE AND MODULE | 6 |
| 22 | TS-PP6021260SW | PLATE, LINER WEAR | 3 |
| 23 | TS-12PLASW | FLANGE, LINER RETAINER (LINER BUSHING) | 3 |
| 24 | TS-PEP75 | CAPSCREW, LINER RETAINER FLANGE | 18 |
| 25 | TS-12PLANSW | NUT, LINER RETAINER | 3 |
| 26 | TS-2410031437 | SEAL, DISCHARGE ADAPTER | 6 |
| 27 | TS-NAT12PDSMA | ADAPTER, DISCHARGE | 2 |
| 28 | TS-2410031433 | SEAL, DISCHARGE CONNECTOR TO DISCHARGE ADAPTER | 2 |
| 29 | TS-NAT12PDSMC | CONNECTOR, DISCHARGE | 2 |
| 30 | TS-700030711 | CAPSCREW, DISCHARGE CONNECTOR (W/LOCKWASHER) | 24 |
| 31 | TS-1292175 | RING, BACKUP (DISCHARGE CONNECTOR) | 6 |
| 32 | TS-1540851 | GASKET,SUCTION MANIFOLD | 3 |
TSC does not warrant or represent that any of such information is accurate, or that any products listed are compatible with each other. Any deviations from the OEM products should be verified as to compatibility.
