| PINION ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. | DESCRIPTION | QTY |
| NO. | EA |
| 1 | 723-1 | 2311 | PINION SHAFT | 1 |
| 2 | 202-2192 | 106 | PINION BEARING | 2 |
| 3 | 726-1-5 | 23.5 | PINION OIL SEAL RACE | 2 |
| 4 | 726-1-K | 7 | KEY 2” X 1” X 11” LONG | 1 |
| 5 | 726-001-02 | 270 | PINION BEARING HOUSING | 2 |
| 6 | 726-001-01 | 33 | PINION BEARING RETAINER | 2 |
| 7 | 726-1-1-HB |
| HEX HEAD BOLT | 16 |
| 8 | 726-1-2-HB |
| HEX HEAD BOLT W/LOCK WASHER | 16 |
| 9 | 726-1-2-G |
| PINION GASKET | 2 |
| 10 | 726-1-2-SL |
| PINION OIL SEAL | 2 |
| 11 | 726-1-8 |
| PINION SEAL RETAINING RING | 2 |
| 12 | 726-1-8-HB |
| HEX BOLT | 8 |
| 13 | 726-1-9 | 10.7 | PINION SHAFT COVER | 1 |
| 14 | 726-1-9-1 |
| END SWING PLATE (c/w pinion shaft cover) | 1 |
| 15 | 726-1-9-1-HB |
| HEX BOLT W/NUT | 1 |
| CRANKSHAFT ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. | DESCRIPTION | QTY |
| NO. | EA |
| 1 | 726-003 | 5522 | CRANKSHAFT | 1 |
| 2 | 723-2 | 1707 | BULL GEAR | 1 |
| 3 | 726-2-HB |
| HEX BOLT | 16 |
| 4 | 723-4 | 1309 | CONNECTING ROD | 3 |
| 5 | 726-3-27 | 88 | INTERNAL RETAINING RING | 4 |
| 6 | 723-3-25 | 74.8 | EXTERNAL RETAINING RING | 3 |
| 7 | 726-3-28 | 11 | SPACER | 2 |
| 8 | 723-3-23 | 237.6 | FIXED BEARING CARRIAGE | 1 |
| 9 | 723-3-21 | 48.4 | FIXED BEARING RETAINING RING | 1 |
| 10 | 726-3-20 | 19.8 | RETAINER PLATE | 2 |
| 11 | 723-3-24 | 231 | FLOATING BEARING CARRIAGE | 1 |
| 12 | 723-3-26 | 55 | FLOATING BEARING RETAINING RING | 1 |
| 13 | 201-2202 | 384 | MAIN BEARING | 2 |
| 14 | 202-2181 | 411 | ECCENTRIC BEARING | 3 |
| 15 | 726-3-20-HB |
| HEX HEAD BOLT W/LCK WASHER | 8 |
| 16 | 726-3-27-HB |
| HEX HEAD BOLT W/LOCK WASHER | 56 |
| 17 | 726-3-23-HB |
| HEX HEAD BOLT W/LOCK WASHER | 32 |
| 18 | 726-2-HN |
| HEAD BOLT, C/W LOCK WASHER | 32 |
| 19 |
|
| 1/16” DIA, WIRE (LENGTH AS REQUIRED) |
|
| CROSSHEAD ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. EA | DESCRIPTION | QTY |
| 1 | 726-006 | 578.6 | CROSSHEAD | 3 |
| 2 | 726-6-1-1 | 154 | CROSSHEAD TOP GUIDE | 3 |
| 3 | 726-6-1-2 | 154 | CROSSHEAD BOTTOM GUIDE | 3 |
| 4 | 726-004-01 | 169.4 | WRIST PIN | 3 |
| 5 | 726-6-9 | 39.6 | WRIST PIN RETAINER PLATE | 3 |
| 6 | 726-6-2 | 15 | STRIPPER BOX SUPPORT PLATE | 3 |
| 7 | 726-6-4-000 | 44 | STRIPPER BOX ASSEMBLY | 3 |
| 8 | 726-6-7 | 140.8 | EXTENSION ROD | 3 |
| 9 | 726-6-10 | 48.4 | ROD CLAMP | 3 |
| 10 | 726-6-8 | 41.8 | PISTON ROD | 3 |
| 11 | 726-6-8-X* | 10 | PISTON | 3 |
| 12 | 726-6-8-1-1 | 1 | PISTON LOCKING NUT | 3 |
| 13 | 202-2195 | 99.4 | BEARING | 3 |
| 14 | 726-6-9-HB |
| HEX BOLT C/W LOCK WASHER | 12 |
| 15 | 726-4-1-HB |
| HEX BOLT C/W LOCK WASHER | 12 |
| 16 | 726-6-7-HB |
| HEX BOLT | 12 |
| 17 | 726-6-11-SB |
| SOCKET BOLT | 24 |
| 18 | 726-6-11 | 3.3 | TAP PAD | 24 |
| 19 | 720-6-3-HB |
| HEX BOLT C/W WASHER | 24 |
| 20 | 720-6-4-G |
| STRIPPER BOX GASKET | 3 |
| 21 | 720-6-2-G |
| STRIPPER BOX SUPPORT PLATE GASKET | 3 |
| STRIPPER BOX ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. EA | DESCRIPTION | QTY |
| 1 | 726-6-4 | 44 | STRIPPER BOX | 3 |
| 2 | 726-6-6 | 1.5 | LANTERN RING | 3 |
| 3 | 726-6-5 | 2 | PACKING RETAINING RING | 3 |
| 4 | 726-6-4-SL |
| PACKING SEALS | 9 |
| 5 | 726-6-5-HB |
| HEX BOLT | 18 |
| 6 | 726-6-7-HB |
| HEX BOLT | 18 |
| 7 | 726-6-3 | 20 | STRIPPER BOX RETAINING RING | 3 |
| FLUID END ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. | DESCRIPTION | QTY |
| NO. | EA |
| 1 | 726-A-25-000 | 2650 | FLUID END MODULE ASSEMBLY | 3 |
| 2 | 726-F-001 | 198 | THREADED RING | 9 |
| 3 | 726-F-002 | 121 | THREADED PLUG RETAINER | 6 |
| 4 | 726-A-4 | 983 | DISCHARGE MANIFOLD | 1 |
| 5 | 726-A-7 | 167.2 | BLANK FLANG, 3”X5000 PSI | 1 |
| 6 | 726-A-2-000 | 855.8 | STRAINER CROSS ASSEMBLY | 1 |
| 7 | 726-A-11-000 | 2370 | PULSATION DAMPENER ASSEMBLY | 1 |
| 8 | 726-F-003 | 148.5 | THREADED LINER RETAINER | 3 |
| 9 | 726-F-2-X |
| LINER | 3 |
| 10 | 726-004-1 |
| LINER SEAL | 3 |
| 11 | 726-A-4-SL |
| DISCHARGE SEAL | 3 |
| 12 | 726-A-1 | 738 | SUCTION MANIFOLD | 1 |
| FLUID MODULE ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. EA | DESCRIPTION | QTY |
| NO. |
| 1 | 726-F-025 | 2235 | FLUID END MODULE | 3 |
| 2 | 726-F-004 | 44 | CYLINDER HEAD PLUG | 6 |
| 3 | 726-F-007 | 24.4 | TOP VALVE GUIDE | 3 |
| 4 | 726-F-72-2 | 0.5 | SPRING, API #7 | 6 |
| 5 | 726-F-72-FO | 29.7 | VALVE, API#7 | 6 |
| 6 | 726-F-73-FO | 24 | VALVE SEAT, API #7 | 6 |
| 7 | 726-F-006 | 6 | LOWER VALVE GUIDE | 3 |
| 8 | 726-F-005 | 7.7 | LOWER VALVE GUIDE RETAINER | 3 |
| 9 | 726-f-004-1 | 0.2 | PLUG SEAL | 6 |
| 10 | 726-F-72-1 |
| VALVE INSERT | 6 |
| 11 | 726-F-2-ST | 5 | STUD, C/W HEX NUT, LOCK WASHER | 48 |
| 12 | 726-F-3-ST | 9.5 | STUD, C/W HEX NUT & LOCK WASHER | 24 |
| 13 | 726-A-4-ST | 11 | STUD, C/W HEX NUT & LOCK WASHER | 12 |
| 14 | 726-F-25-1 |
| STUD, C/W HEX NUT & LOCK WASHER | 24 |
| DESURGER ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. EA | DESCRIPTION | QTY |
| NO. |
| 1 | 726-A-1 | 708.4 | SUCTION MANIFOLD | 1 |
| 2 | 726-A-1-2 | 5 | DESURGE RUBBER | 2 |
| 3 | 726-A-1-1 | 10 | DESURGER RING | 2 |
| 4 | 726-A-1-HB |
| HEX HEAD BOLT, C/W HEX NUT & LOCK WASHER | 24 |
| ITEM | PART NO. | WT. EA | DESCRIPTION | QTY |
| NO. |
| 1 | 726-A-1 | 708.4 | SUCTION MANIFOLD | 1 |
| 2 | 726-A-20 | 271 | DESURGER | 2 |
| 2a | 726-A-5 | 101.2 | BLANK FLANGE (ALTERNATIVE) | 2 |
| 3 | 726-A-1-HB |
| HEX HEAD BOLT, C/W HEX NUT & LOCK WASHER | 24 |
| STRAINER CROSS ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. EA | DESCRIPTION | QTY |
| NO. |
| 1 | 726-A-2 | 826 | STRAINER CROSS | 1 |
| 2 | 726-A-3 | 132 | STRAINER CROSS BULL PLUG FLANGE. 3”X5000 PSI | 1 |
| 3 | 726-A-13 | 9 | STRAINER (filter cylinder) | 1 |
| 4 | 726-A-2-SL |
| METAL RING GASKET, R44 | 2 |
| 5 | 726-A-2-1-G |
| METAL RING GASKET, R39 | 1 |
| 6 | 726-A-2-HN | 1 | HEX NUT, W/LOCK WASHER | 32 |
| 7 | 726-A-2-HB | 4 | STUD | 32 |
| PULSATION DAMPENER ASSEMBLY PARTS LIST |
|
|
|
| ITEM | PART NO. | WT. | DESCRIPTION | QTY |
| NO. | EA |
| 1 | 726-A-11-1 | 1936 | PULSATION DAMPENER BODY | 1 |
| 2 | 726-A-11-2 | 345.4 | PD TOP COVER | 1 |
| 3 | 726-A-11-3 | 74.8 | PD BOTTOM FLANGE | 1 |
| 4 | 726-A-11-4 | 20 | RUBBER BLADDER KIT | 1 |
| 5 | 726-A-11-2-1 | – | PD GAUGE PROTECTER | 1 |
| 6 | 726-A-11-G |
| PRESSURE GAUGE, 6000 PSI | 1 |
| 7 | 726-A-11-V |
| 4 WAY VALVE | 1 |
| 8 | 726-A-11-2-2 |
| VALVE NPT FITTING | 1 |
| 9 | 726-A-11-2-SL |
| PD ADAPTER SEAL | 1 |
| 10 | 726-A-11-3-SB |
| SOCKET HEAD BOLT | 8 |
| 11 | 726-A-11-2-1-LE |
| LIFTING EYE | 2 |
| 12 | 726-A-11-2-1-ST |
| STUD | 2 |
| 13 | 726-A-11-2-ST |
| STUD, | 10 |
| 14 | 726-A-11-2-HN |
| HEX NUT, C/W LOCK WASHER | 12 |
| 15 | 726-A-11-3-HB |
| STUD, C/W HEX NUT & LOCK WASHER | 8 |
| 16 | 726-A-11-2-HB |
| HEX HEAD BOLT, C/W NUT & LOCKWASHER | 4 |
Telephone
E-MAIL