|
BOP Diverter Well Control Parts List | 212 | 2197002-75 |
| 1/4″ RUPTURE DISC WITH ANGLED SEAT, TYPE: RD-2500. PRESSURE RANGE: 2425–2650 LBS/SQ INCH. MATERIAL: STAINLESS STEEL (1.4301). TEMP.: 72°F, CERTIFICATION: 3.1 ACCORDING TO EN 10204. | 1 | BOP/Diverter Control System | | 213 | 2762487-06 |
| SAFETY HEAD 1/2″, 1/2″ MNPT (EXTERNAL THREAD) X 3/8″ NPT, 15 000 LBS/SQ INCH | 1 | BOP/Diverter Control System | | 214 | 2754028-01 |
| CHECK VALVE, SWAGELOK, SERIES CH, SS-CHS8-EP-1, SIZE 1/2″, STAINLESS STEEL TYPE 316, SEALS FROM ETHYLENE PROPYLENE COPOLYMER, FROM -45°C TO 148°C | 1 | BOP/Diverter Control System | | 215 | 2762489-02 |
| NEEDLE VALVE, 1/2″ NPS, 6000 LBS/SQ INCH, STAINLESS STEEL 316, INTERNAL THREAD ON BOTH ENDS, VITON O-RING SEAL, SERIES: SPV-6000 | 1 | BOP/Diverter Control System | | 216 | 2725775-03 |
| BALL VALVE, 3-WAY, SOLID, SERIES 40G, TUBE FITTING 1/4″ X 1/4″ X 1/4″, CV 0.90, THROUGH HOLE: 0.187″, LEVER CONTROL, SEAL: MODIFIED PTFE, FLOW SCHEME: 3-WAY, SWITCHING, L-SHAPED FLOW PATH, NOMINAL PRESSURE: 2500 LBS/SQ INCH AT 300°F / 172 BAR AT 148°C, STAINLESS STEEL 316. | 1 | BOP/Diverter Control System | | 217 | 2762487-07 |
| SAFETY HEAD MAXPRO 9/16 (HIGH PRESSURE) X 3/8 NPT WITH INTERNAL THREAD, 65 000 LBS/SQ INCH, STAINLESS STEEL 316 | 1 | BOP/Diverter Control System | | 218 | 2197002-71 |
| 1/4″ RUPTURE DISC WITH ANGLED SEAT, TYPE: RD-12000. PRESSURE RANGE: 11 640–12 720 LBS/SQ INCH. MATERIAL: STAINLESS STEEL (1.4301). TEMP.: 72°F, CERTIFICATION: 3.1 ACCORDING TO EN 10204. | 1 | BOP/Diverter Control System | | 219 | 2762489-03-01 |
| NEEDLE VALVE, 9/16″, HIGH PRESSURE, 30 000 LBS/SQ INCH, STEM WITH V-SHAPED TIP, TWO-WAY, STRAIGHT, METAL-TO-METAL SEAT, STEM AND VALVE BODY MADE OF STAINLESS STEEL 316. | 1 | BOP/Diverter Control System | | 220 | 2731083-02-02 |
| CHECK VALVE, O-RING SEAL, OPERATING PRESSURE 65 000 LBS/SQ INCH , THROUGH HOLE 0.188″, BODY, COVER, DISC, COVER SEAL MADE OF STAINLESS STEEL 316, O-RING MADE OF BUNA-N, SPRING MADE OF STAINLESS STEEL 300, -40° C. | 1 | BOP/Diverter Control System | | 221 | 703128-02 |
| BALL VALVE, 2-WAY, PIPELINE 3/4″, OPERATING PRESSURE: 2500 LBS/SQ INCH, STAINLESS STEEL BODY, SEAT SEAL MADE OF PFA (PERFLUORINATED COPOLYMER), STANDARD BLACK HANDLE, 6.4 CV, TEMPERATURE FROM -65 °F TO 150° F | 1 | BOP/Diverter Control System | | 222 | 619002-02-23-101 |
| RUPTURE DISC, 1/4″, 970–1060 LBS/SQ INCH, MEMBRANE SIZE AND SEAT TYPE: 1/4″ ANGLE. PRESSURE RANGE: 970–1060 LBS/SQ INCH. MATERIAL: STAINLESS STEEL | 1 | BOP/Diverter Control System | | 223 | 2802441-12 |
| BALL VALVE, 1-1/2″ JIC, EXTERNAL THREAD, MOPD 6000 LBS/SQ INCH, BLOCK BODY, BODY AND GATE MADE OF STAINLESS STEEL 316, SEALS, BUSHINGS AND WASHERS MADE OF DELRIN, O-RINGS MADE OF BUNA-N. | 8 | BOP/Diverter Control System | | 224 | 2802441-11 |
| BALL VALVE, 1″ JIC, EXTERNAL THREAD, MOPD 6000 LBS/SQ INCH, BLOCK BODY, BODY AND GATE MADE OF STAINLESS STEEL 316, SEALS, BUSHINGS AND WASHERS MADE OF DELRIN, O-RINGS MADE OF BUNA-N. | 1 | BOP/Diverter Control System | | 225 | 2802441-10 |
| BALL VALVE, 3/4″ JIC, EXTERNAL THREAD, MOPD 7500 LBS/SQ INCH, BLOCK BODY, BODY AND GATE MADE OF STAINLESS STEEL 316, SEALS, BUSHINGS AND WASHERS MADE OF DELRIN, O-RINGS MADE OF BUNA-N. | 9 | BOP/Diverter Control System | | 226 | 2710365-13 |
| “SAFETY VALVE, 1/2″”, SETTING 3190 LBS/SQ INCH, DESIGN STANDARD: ASME, SEC. VIII; SIZE: API 520 / CAPPED OUTLET; MATERIAL: BRASS; INLET: 1/2″” FNPT (INTERNAL THREAD); OUTLET: 3/4″” FNPT (INTERNAL THREAD); THROUGH HOLE: 0.049″”; SEAL MATERIAL: PTFE. SPECIFIED TRIGGER PRESSURE: 3190 LBS/SQ INCH GAUGE. REQUIRED TEST ACT AT THE SPECIFIED TRIGGER PRESSURE AND TR CU 032, 10 AND 12 CERTIFICATES.” | 1 | BOP/Diverter Control System | | 227 | 2814499-02 |
| “NEEDLE VALVE, 3/8″”, 3000 LBS/SQ INCH, ANGLE FLOW SCHEME, SCREW CAP, PTFE SEAL, STAINLESS STEEL HANDLE INDICATOR, CAP, PACKING, STEM AND BALL INSERT MADE OF STAINLESS STEEL 316.” | 1 | BOP/Diverter Control System | | 228 | 2826998-01 |
| “BALL VALVE, 5000 LBS/SQ INCH, 1″”, CODE 61, BLOCK BODY, 1″” CODE 61 FLANGED COVER X 1″” CODE 61 FLAT CONNECTING SURFACE , WITH STANDARD ZINC ALLOY HANDLE; BODY, BALL AND STEM MADE OF STAINLESS STEEL 316, BALL AND STEM SEALS MADE OF POM (POLYOXOMETALLATE), ADAPTER AND STEM SEALS MADE OF BUNA-N.” | 1 | BOP/Diverter Control System | | 229 | 619018-01-01 |
| “VALVE, 2-WAY, 1/4″” NPT, 420 BAR, STAINLESS STEEL, 2-WAY SHUT-OFF AND BLEED NEEDLE VALVE; INLET / OUTLET AND VENT HOLES: 1/4″” NPT WITH INTERNAL THREAD. NOMINAL PRESSURE: 420 BAR / 6000 LBS/SQ INCH; MATERIAL: STAINLESS STEEL 316; SEAL: PTFE” | 1 | BOP/Diverter Control System | | 230 | 2710365-09 |
| “SAFETY VALVE, 1″”, SETTING 3 300 LBS/SQ INCH, DESIGN STANDARD ASME, SEC. VIII; SIZE: API 520 / CAPPED OUTLET; MATERIAL: STAINLESS STEEL 316; INLET: 1″” MNPT (EXTERNAL THREAD); OUTLET: 1″” FNPT (INTERNAL THREAD); THROUGH HOLE: 0.049″”; SEAL MATERIAL: PTFE. SPECIFIED TRIGGER PRESSURE: 3300 LBS/SQ INCH GAUGE. REQUIRED TEST ACT AT THE SPECIFIED TRIGGER PRESSURE AND TR CU 032, 10 AND 12 CERTIFICATES.” | 1 | BOP/Diverter Control System | | 231 | 2725545-01 |
| MANUAL PISTON PUMP, SERIES 5200 WITH VACUUM RELEASE VALVE, ADAPTER WITH SPOUT, 1″ INLET AND 3/4″ OUTLET, 8″ HOSE AND NOZZLE, WITH TELESCOPIC SUCTION PIPE | 1 | BOP/Diverter Control System | | 232 | 716943-02 |
| DAMPER, BUILT-IN, PISTON, OPERATING PRESSURE 15 000 LBS/SQ INCH, 1/4″ NPT (INTERNAL THREAD) X 1/4″ NPT (EXTERNAL THREAD), STAINLESS STEEL. INCLUDES 4 (FOUR) PISTONS FOR USE WITH VARIOUS WORKING MEDIA: A-B: GAS; B-C: WATER; C-D: LOW-VISCOSITY OIL; E: THICK LUBRICATING OIL | 1 | BOP/Diverter Control System | | 233 | 707262-01 |
| PRESSURE REGULATOR, PNEUMATIC, OUTLET PRESSURE 5–125 LBS/SQ INCH, PRESSURE RELIEF, 3/4″ PORT, WITH GAUGE, MAX. INLET PRESSURE 300 LBS/SQ INCH, WITH ADJUSTMENT HEAD. | 1 | BOP/Diverter Control System | | 234 | 704245 |
| CHECK VALVE, 1/2″ SWAGELOK X 1/2″ SWAGELOK, 1/3 LBS/SQ INCH, STAINLESS STEEL FOR AIR/HYDRAULIC FLUID | 1 | BOP/Diverter Control System | | 235 | 2762552-02 |
| BALL VALVE, 1-1/2″ NPT, DESIGNED FOR FLUID WORKING PRESSURE (WOG) 600 LBS/SQ INCH, BRONZE BODY ACC. ASTM B-584 | 1 | BOP/Diverter Control System | | 236 | 2762552-01 |
| BALL VALVE, 3/4″ NPT, DESIGNED FOR FLUID WORKING PRESSURE (WOG) 600 LBS/SQ INCH, BRONZE BODY ACC. ASTM B-584 | 1 | BOP/Diverter Control System | | 237 | 707262-02 |
| PRESSURE REGULATOR, PNEUMATIC, OUTLET 5–125 LBS/SQ INCH, 1-1/2″ PRESSURE RELIEF PORT, WITH GAUGE, MAX. INLET PRESSURE 300 LBS/SQ INCH, WITH ADJUSTMENT HEAD. | 1 | BOP/Diverter Control System | | 238 | 619001-01-34 |
| PNEUMATIC VALVE, 3/2-WAY; CONNECTION: 1/4″ NPT WITH INTERNAL THREAD. OPERATING PRESSURE: 0–14 BAR. MEDIUM: AIR. TEMP.: -29°C / +90°C; MATERIAL: BRASS. NORMALLY CLOSED. | 1 | BOP/Diverter Control System | | 239 | 2710719-03 |
| CHECK VALVE, 1/2″ NPT, 5000 LBS/SQ INCH, BUILT-IN, STAINLESS STEEL DISC, MODEL CV-50, HYDRAULIC OIL OR OIL-CONTAINING WATER | 1 | BOP/Diverter Control System | | 240 | 2809795-31-01 |
| NEEDLE VALVE, 1/2″ NPT, WITH INTERNAL THREAD, 6000 LBS/SQ INCH, STRAIGHT THROUGH BODY, CV=0.45, WITH GRAPHITE PACKING FOR USE AT TEMPERATURES DOWN TO -20°F, STAINLESS STEEL 316. | 1 | BOP/Diverter Control System | | 241 | 2819928-01 |
| PNEUMATIC VALVE, 1/4″, 2-POSITION, 4-WAY, 200 LBS/SQ INCH, WITH PROTRUDING LEVER CONTROL, DOUBLE SPOOL, DUAL POSITION LOCK. LOW-TEMPERATURE SEALS WITH EXTENDED 6″ HANDLE; CERTIFICATE OF COMPLIANCE | 1 | BOP/Diverter Control System | | 242 | 2827017-01 |
| CHECK VALVE, SAE CODE 61, 1-1/2″, STANDARD OPENING PRESSURE 15 LBS/SQ INCH, BUNA-N SEAL, STEEL WITH NICKEL-ZINC COATING. NOMINAL TEMPERATURE RANGE: FROM -22°F TO 175°F (FROM -30°C TO 80°C). | 1 | BOP/Diverter Control System | | 243 | 2725536-03 |
| PRESSURE SENSOR, 1/4″, 3-WAY, 150 LBS/SQ INCH, NO OR NC AIR FEED PORT, ADJUSTMENT RANGE: 750–2000 LBS/SQ INCH, (VALVE SETTING: 1000 LBS/SQ INCH), YELLOW SPRING. | 1 | BOP/Diverter Control System | | 244 | 2710365-12 |
| SAFETY VALVE, 0.5″, SETTING 135 LBS/SQ INCH, DESIGN STANDARD: ASME, SEC. VIII; SIZE: API 520 / CAPPED OUTLET; MATERIAL: BRASS; INLET: 0.5″ MNPT (EXTERNAL THREAD); OUTLET: 1″ FNPT (INTERNAL THREAD); THROUGH HOLE: 0.077″; SEAL MATERIAL: BUNA-N. SPECIFIED TRIGGER PRESSURE: 135 LBS/SQ INCH GAUGE. REQUIRED TEST ACT AT THE SPECIFIED TRIGGER PRESSURE AND TR CU 032, 10 AND 12 CERTIFICATES. | 1 | BOP/Diverter Control System | | 245 | 2702007 |
| VALVE, 3-WAY, 2-POSITION, WITH PNEUMATIC CONTROL, 1/8″ NPTF, MAIN PORT 1/4″ NPTF, ADJUSTABLE PRESSURE ON INLET 0–200 LBS/SQ INCH (0–14 BAR GAUGE); STAINLESS STEEL 316, VITON SEALS. WITH SPRING RETURN, NORMALLY CLOSED, MINIMUM REQUIRED CONTROL PRESSURE: 18–36 LBS/SQ INCH (1.25–2.5 BAR GAUGE) | 1 | BOP/Diverter Control System | | 246 | 2761787-02 |
| DOUBLE VALVE, ELECTROMAGNETIC, WITH BUTTON, PRESS SPRING, COMBINED, 3-WAY, NC, PORT 1/4″ NPT, STAINLESS STEEL 316, 1.8 W SOLENOID, LOW-TEMPERATURE BUNA-N SEAL (-40°C), 24 V DC. | 1 | BOP/Diverter Control System | | 247 | 619001-53-02 |
| VALVE, SPOOL TYPE, 14 BAR, 1/4″ NPT: CONNECTION 1/4 – 18 NPT; OPERATING PRESSURE: 0.2–14 BAR; MEDIUM: AIR; MATERIAL: STAINLESS STEEL 316 WITH LOW-TEMPERATURE SEALS (DOWN TO -20°F) | 1 | BOP/Diverter Control System | | 248 | 2710402-38 |
| “HYDRAULIC REGULATOR, MAX. SUPPLY PRESSURE 3000 LBS/SQ INCH, ADJUSTABLE OUTPUT PRESSURE 50-1500 LBS/SQ INCH. (1) OUTLET. PORT 1/2″” SAE, (1) INLET. PORT 1/2″” SAE, (1) VENT. PORT 1/2″” SAE. WITH MANUAL DRIVE. MODEL NO: KR-12S3EM” | 1 | BOP/Diverter Control System | | 249 | 2762791-01 |
| PLATE VALVE, DIRECT ACTING, WITH PNEUMATIC CONTROL, 1-1/2″ NPT, SPOOL 1/4″, OVERFLOW RATIO 4:1, NO MORE THAN 500 LBS/SQ INCH | 1 | BOP/Diverter Control System | | 250 | 2710402-40 |
| HYDRAULIC REGULATOR, MAX. SUPPLY PRESSURE 5000 LBS/SQ INCH, ADJUSTABLE OUTPUT PRESSURE 300–3000 LBS/SQ INCH. (1) OUTLET. PORT 1/2″ SAE, (1) INLET. PORT 1/2″ SAE, (1) VENT. PORT 1/2″ SAE. WITH MANUAL DRIVE. MODEL NO: KR-38S5DM | 1 | BOP/Diverter Control System | | 251 | 2762404-11 |
| “ASSEMBLED PUMP, HYDRAULIC, WITH PNEUMATIC DRIVE, PNEUMATIC MOTOR DIAMETER 7″”, COMPRESSION RATIO 70:1, DOUBLE-ACTING, SELF-PRIMING, WORKING VOLUME 7.8 CUBIC INCHES PER CYCLE, MAX. OUTPUT PRESSURE 10500 LBS/SQ INCH, FLUID INLET 1-1/4″” NPT, FLUID OUTLET 1/2″” NPT, PNEUMATIC CONNECTION FITTING 3/4″” NPT, EXHAUST PIPE 1-1/4″” NPT, STAINLESS STEEL HYDRAULIC PUMP BODY, CHECK VALVES AND GATE.” | 1 | BOP/Diverter Control System | | 252 | 2710365-11 |
| “SAFETY VALVE, 1″”, SETTING 3 300 LBS/SQ INCH, DESIGN STANDARD: ASME, SEC. VIII; SIZE: API 520 / CAPPED OUTLET; MATERIAL: STAINLESS STEEL 316; INLET: 1″” FNPT (INTERNAL THREAD); OUTLET: 1″” FNPT (INTERNAL THREAD); THROUGH HOLE: 0.049″”; SEAL MATERIAL: PTFE. SPECIFIED TRIGGER PRESSURE: 3300 LBS/SQ INCH GAUGE. REQUIRED TEST ACT AT THE SPECIFIED TRIGGER PRESSURE AND TR CU 032, 10 AND 12 CERTIFICATES | 1 | BOP/Diverter Control System | | 253 | 2809797-13-01 |
| HYDRAULIC REGULATOR, FAIL-SAFE PNEUMATIC MOTOR, MAX. SUPPLY PRESSURE 3000 LBS/SQ INCH, ADJUSTABLE OUTPUT PRESSURE 50–1500 LBS/SQ INCH, CV=9.4. INLET. PORT 1″ SAE, WITH CYLINDRICAL THREAD, VENT. PORT 1/2″ NPT, OUTLET. PORT 1″ SAE WITH CYLINDRICAL THREAD, BODY AND INTERNAL COMPONENTS MADE OF STAINLESS STEEL, FITTINGS MADE OF CARBON STEEL, O-RING SEAL MADE OF BUNA-N. MODEL NO: KR75-S3LFSA | 1 | BOP/Diverter Control System | | 254 | 2762488-04 |
| BALL VALVE 3/4″ NPT, 1000 LBS/SQ INCH GAUGE, STAINLESS STEEL, FOR HYDRAULIC FLUID, FULL PORT | 1 | BOP/Diverter Control System | | 255 | 2778284-28-09 |
| BALL VALVE, ROUND BODY, HOLE SIZE: 1-1/2″ SAE, DETACHABLE FLANGE, BODY AND END CONNECTIONS: STAINLESS STEEL 316; BALL AND STEM MATERIAL: STAINLESS STEEL 316; SEALS, BUSHINGS, WASHERS: DERLIN; O-RING MATERIAL: BUNA-N. | 1 | BOP/Diverter Control System | | 256 | 2809795-35-01 |
| BALL VALVE, WITH DETACHABLE FLANGE, 1-1/2″ SAE, CODE 61, MAXIMUM WORKING PRESSURE 3000 LBS/SQ INCH, FORGED BODY. BALL SEAL: PEEK; O-RING: BUNA-N; HANDLE: PROTRUDING, MADE OF STAINLESS STEEL FOR TEMPERATURE RANGE -26.4° C | 1 | BOP/Diverter Control System | | 257 | 2339950-02 |
| VALVE, PROCESS FILTER, TRIPLE, 1/4″ ON INLET AND OUTLET, NOMINAL PRESSURE 6000 LBS/SQ INCH GAUGE., FILTER 5 ΜM, STAINLESS STEEL | 1 | BOP/Diverter Control System | | 258 | 2761 108-01 |
| NEEDLE VALVE, HYDRAULIC, TUBE 1/4″, 5000 LBS/SQ INCH, WITH BLUNT END STEM, STAINLESS STEEL | 1 | BOP/Diverter Control System | | 259 | 2710365-10 |
| SAFETY VALVE, 1″, SETTING 1650 LBS/SQ INCH, DESIGN STANDARD: ASME, SEC. VIII; SIZE: API 520 / CAPPED OUTLET; MATERIAL: STAINLESS STEEL 316; INLET: 1″ MNPT (EXTERNAL THREAD); OUTLET: 1″ FNPT (INTERNAL THREAD); THROUGH HOLE: 0.049″; SEAL MATERIAL: PTFE. SPECIFIED TRIGGER PRESSURE: 1650 LBS/SQ INCH GAUGE. REQUIRED TEST ACT AT THE SPECIFIED TRIGGER PRESSURE AND TR CU 032, 10 AND 12 CERTIFICATES | 1 | BOP/Diverter Control System | | 260 | 711092 |
| “FAST-ACTING VALVE, 1/2 NPTF, MOPD 150 LBS/SQ INCH, CAST ALUMINUM BODY, CV=5.00 ON OUTPUT; CV=5.50 ON BLEED LINE” | 1 | BOP/Diverter Control System | | 261 | 2788325-01 |
| “AIR VALVE, 4-WAY, 3-POSITION, 1/2″” NPT, LOW-TEMP. BUNA-N SEAL. CERTIFICATE OF COMPLIANCE” | 1 | BOP/Diverter Control System | | 262 | 2762401-07-01 |
| “DIVERTER VALVE, 1-1/2″”, SAE PORT, 3000 LBS/SQ INCH, DIVERTER FLOW SCHEME, 4-WAY, 2-POSITION WITH BUILT-IN PNEUMATIC OPERATOR, MEASURE. PORT 1/4″” SAE FOR CYLINDERS 1 AND 2, FOR OIL-CONTAINING WATER OR HYDRAULIC OIL. BRONZE BODY, STAINLESS STEEL SHAFT, ROTOR AND SEALS, BUNA-N O-RINGS. MOUNTING STUDS PROVIDED. WORKING MEDIUM TEMPERATURE RANGE: FROM -40°F TO +250°F (FROM -40°C TO +121°C)” | 1 | BOP/Diverter Control System | | 263 | 2762401-05 |
| “DIVERTER VALVE, 1/2″”, SAE PORT, 3000 LBS/SQ INCH, CLOSED CENTER, 4-WAY, 2-POSITION WITH BUILT-IN PNEUMATIC OPERATOR, 1/4″” FNPT (INTERNAL THREAD), FOR OIL-CONTAINING WATER OR HYDRAULIC OIL. BRONZE BODY, STAINLESS STEEL SHAFT, ROTOR AND SEALS, BUNA-N O-RINGS. WORKING MEDIUM TEMPERATURE RANGE: FROM -40°F TO +250°F (FROM -40°C TO +121°C)” | 1 | BOP/Diverter Control System | | 264 | 2762401-08 |
| DIVERTER VALVE, 1″, SAE PORT, 3000 LBS/SQ INCH, CLOSED CENTER, 4-WAY, 2-POSITION WITH BUILT-IN PNEUMATIC OPERATOR, MEASURE. PORT 1/4″ SAE FOR CYLINDERS 1 AND 2, FOR OIL-CONTAINING WATER OR HYDRAULIC OIL. BRONZE BODY, STAINLESS STEEL SHAFT, ROTOR AND SEALS, BUNA-N O-RINGS. MOUNTING STUDS PROVIDED. WORKING MEDIUM TEMPERATURE RANGE: FROM -40°F TO +250°F (FROM -40°C TO +121°C) | 1 | BOP/Diverter Control System | | 265 | 2762401-07 |
| DIVERTER VALVE, 1-1/2″, SAE PORT, 3000 LBS/SQ INCH, CLOSED CENTER, 4-WAY, 2-POSITION WITH BUILT-IN PNEUMATIC OPERATOR, MEASURE. PORT 1/4″ SAE FOR CYLINDERS 1 AND 2, FOR OIL-CONTAINING WATER OR HYDRAULIC OIL. BRONZE BODY, STAINLESS STEEL SHAFT, ROTOR AND SEALS, BUNA-N O-RINGS. MOUNTING STUDS PROVIDED. WORKING MEDIUM TEMPERATURE RANGE: FROM -40°F TO +250°F (FROM -40°C TO +121°C) | 1 | BOP/Diverter Control System | | 266 | 2762401-06 |
| DIVERTER VALVE, 1-1/2″, SAE PORT, 3000 LBS/SQ INCH, CLOSED CENTER, 4-WAY, 2-POSITION WITH BUILT-IN PNEUMATIC OPERATOR, MEASURE. PORT 1/4″ SAE FOR CYLINDERS 1 AND 2, FOR OIL-CONTAINING WATER OR HYDRAULIC OIL. BRONZE BODY, STAINLESS STEEL SHAFT, ROTOR AND SEALS, BUNA-N O-RINGS. MOUNTING STUDS PROVIDED. WORKING MEDIUM TEMPERATURE RANGE: FROM -40°F TO +250°F (FROM -40°C TO +121°C) | 1 | BOP/Diverter Control System | | 267 | 2710402-37 |
| “HYDRAULIC REGULATOR, MANUAL, MAX. SUPPLY PRESSURE 3000 LBS/SQ INCH, ADJUSTABLE OUTPUT PRESSURE 50–1500 LBS/SQ INCH, CV=14,9; (2) INLET. PORT 1″” SAE, WITH CYLINDRICAL THREAD. (2) VENT. PORT 1/2″” SAE WITH CYLINDRICAL THREAD; (1) OUTLET. PORT 1-1/2″” SAE, WITH CYLINDRICAL THREAD. BODY AND INTERNAL COMPONENTS MADE OF STAINLESS. STEEL. O-RING SEAL MADE OF BUNA-N. MODEL NO: KR-140S3LM” | 1 | BOP/Diverter Control System | | 268 | 2710402-36-02 |
| “HYDRAULIC REGULATOR, FAIL-SAFE PNEUMATIC MOTOR, MAX. SUPPLY PRESSURE 5000 LBS/SQ INCH, ADJUSTABLE OUTPUT PRESSURE 300–3000 LBS/SQ INCH. CV=17.5. (2) INLET. PORT 1″” SAE, CODE 62. (1) VENT. PORT 1″” SAE, CODE 62, (1) OUTLET. PORT 1-1/2″” SAE, CODE 62. BODY, FLANGES AND SPRING CASE MADE OF STAINLESS STEEL 316, MOVABLE, INLET, VENT, SHUT-OFF PLATES AND COMPRESSING SEALS MADE OF STAINLESS STEEL 400, O-RING SEAL MADE OF BUNA-N, BACKUP RING MADE OF PTFE. AMBIENT TEMPERATURE RANGE: FROM -30°F TO +185°F (FROM -34°C TO +85°C).” | 1 | BOP/Diverter Control System |
|
|
Telephone
E-MAIL