|
| Material Description | Material Long Text |
| | 1 | FINGERS,FIXED SIDE,P/N 14612-01,F/SHAKER | FINGERS, FIXED SIDE, P/N 14612-01, FOR SHALE SHAKER-UNDER SCREEN TENSIONING, MAKE: DERRICK, MODEL: FLC504, 17-4PH SST | | 2 | FINGERS,ADJ SIDE,P/N 14611-01,F/SHAKER | FINGERS, ADJ SIDE, P/N 14611-01, FOR SHALE SHAKER-UNDER SCREEN TENSIONING, MAKE: DERRICK, MODEL: FLC504, 17-4PH SST | | 3 | LOCK BOLT SCREEN SHALE SHAKER | LOCK BOLT SCREEN SHALE SHAKER | | 4 | GAS MONGOOSE SCREEN, IT NO 11,SWACO | GASKET MONGOOSE SCREEN, IT NO 11, FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 5837001 | | 5 | WEDGE SCREEN CLAMPING, MONGOOSE | WEDGE SCREEN CLAMPING FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 5895001 | | 6 | WELDMENT, SCREEN BAR, MONGOOSE | WELDMENT, SCREEN BAR FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9671640 | | 7 | REWORK KIT, BASKET SCREEN BED, SWACO | REWORK KIT, BASKET SCREEN BED ASSEMBLY FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874600 | | 8 | SCREEN BED 1, MONGOOSE, MI SWACO | SCREEN BED 1 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874605 | | 9 | SCREEN BED 3, MONGOOSE, MI SWACO | SCREEN BED 3 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874607 | | 10 | SCREEN BED 4, MONGOOSE, MI SWACO | SCREEN BED 4 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9874608 | | 11 | SCREEN PLUGVSM-300, MAKE – BRANDT | SCREEN PLUG FOR SHALE SHAKER SCREEN, MODEL VSM – 300, MAKE – BRANDT, OLD P/N: AWC-2, P/N: MISC-AWC2 | | 12 | PRIMARY SCREEN REAR SEAL BAR, F/ SHAKER | PRIMARY SCREEN REAR SEAL BAR, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/02/014 | | 13 | UPPER DECK SCALPING SCREEN | UPPER DECK SCALPING SCREEN, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 63727FMSD040 | | 14 | HIGH TEMP. SCREEN CUSHION F/ RUBBER | HIGH TEMP. SCREEN CUSHION F/ RUBBER, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 26FI | | 15 | REPAIR TOOL, SCREEN, SHALE SHAKER, AX-1 | REPAIR TOOL, SCREEN, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0336 | | 16 | HOOK,SCREEN WITHRAWAL,SHALE SHAKER,AX-1 | HOOK, SCREEN WITHRAWAL, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3018 | | 17 | REPAIR PLUG,SCREEN-BOX OF100,SHALESHAKER | REPAIR PLUG, SCREEN – BOX OF 100, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0268-100 | | 18 | CARRIER ASSY, SECON. SCREEN,SHALE SHAKER | CARRIER ASSY, SECONDARY SCREEN, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/02/007 | | 19 | UPI RUBBER PLUG, MONGOOSE SCREEN, SHAKER | UPI RUBBER PLUG, FOR MONGOOSE SCREEN, FOR SHALE SHAKER, MODEL: MONGOOSE – PRO /967530-04IT, MAKE: MI SWACO, P/N: UPIMGPLUG | | 20 | PLUG, UPI RUBBER,VSM300 COMPOSITE SCREEN | PLUG, UPI RUBBER, FOR COMPOSITE SCREEN, FOR NOV SHALE SHAKER, MODEL: VSM 300, MAKE: UPI, P/N: UPIVSMPLUG | | 21 | END CAP, SHALE SHAKER SCREEN, 300/01/003 | END CAP, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/003 | | 22 | SEAL HOUSING, SHALE SHAKER, 300/01/004 | SEAL HOUSING, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/004 | | 23 | MOTOR, MONGOOSE SHALE SHAKER, EM3C00010 | MOTOR FOR MONGOOSE SHALE SHAKER 380/415V, 50 HZ MAKE – MI SWACO P/N – EM3C00010 CDX P/N – CDX18-5900 | | 24 | SHALE SHAKER MOTOR, BRANDT,VSM300,2.68KW | MOTOR, SHALE SHAKER, TYPE: W-EF132MS-H, 2.68 KW, 3 PH, 460 V, 5.6 A MAX, 50-70 HZ, 1480–2070 RPM, DUTY: S1 INV C KW, INSULATION CLASS: F, AMB. TEMP. + 55C, IP 56, BEARING: DE 63082RSC3, NDE 62102RSC3, MAKE: BROOK CROMPTON, P/N: 132E000673, FOR BRANDT MODEL: VSM300 | | 25 | ELE MOTOR, 5.5KW, SHALE SHAKER,QUAD AX-1 | ELECTRIC MOTOR, 5.5KW, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: EL-M56-FM-46060 | | 26 | MOTOR KIT, 2.5HP, FIXED WEIGHT, 440-480V | MOTOR KIT, 2.5 HP, FIXED WEIGHT, 440-480V, 70 FRAME, 60 HZ, WITH MOUNTING HARDWARE, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 9870525 | | 27 | MOTOR KIT, 2.5HP, SWING WEIGHT, 440-480V | MOTOR KIT, 2.5 HP, SWING WEIGHT, 440-480V, 70 FRAME, 60 HZ, WITH MOUNTING HARDWARE, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 9870528 | | 28 | MUD CLEANER, MONGOOSE PRO, 212/6T4 | MUD CLEANER, MONGOOSE PRO, 212/6T4, P/N: 9675360-04, 2 (2.5HP) MOTOR 440-480V, 60 HZ, 3PH, 1800 RPM, ATEX/IECEX EXD IIB 160 DEG C, IP65, TWELVE (SIX TWIN) REPLACEABLE 4″ TWIN D-SLITER CONES (MODEL: 6T4) CAPABLE OF UPTO 900 GPM AND TWO REPLACEBLE 12″ D-SANDER CONE (MODEL 2- 12) CAPABLE OF UPTO 1000 GPM, MOUNTED ABOVE A MONGOOSE PRO SHALE SHAKER WITH BYPASS BETWEEN INDEPENDENTLY OPERATED SHAKER, D-SILTER, AND D- SANDER | | 29 | BASKET ASSY, SHALE SHAKER, VSM 300, NOV | BASKET ASSY, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/02/001 | | 30 | MOTOR, VIBRATING, 460/480V, 60HZ, 3PH | MOTOR, VIBRATING, RATING: 460/480V, 60HZ, 3PH, 1800 RPM, FOR SHALE SHAKER, MODEL: FLC-504, DWG. NO: 15984, P/L NO: 16013-00, MAKE: DERRICK CORPORATION, P/N: SGX-38-18-460/480-6-014 | | 31 | KIT, MOTOR 2.5 HP, FIXED, SHALE SHAKER | KIT, MOTOR 2.5 HP, FIXED WT, 220-240/380-415V 70 FRAME, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 9870526 | | 32 | PAINT ORANGE-436 PILOT2(STD PKG-5LTR) | PAINT ORANGE-436 PILOT 2 (5 LTR PACKING) F/ SHALE SHAKER, JOTUN, P/N: D01-P31 | | 33 | BUTTERFLY VALVE,10″SHALE SHAKER,VSM 300 | BUTTERFLY VALVE, SIZE: 10″ FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV-BRANDT, VALVE MAKE: TOMOE, P/N: 001-431-055 | | 34 | FLOAT MOUNT ASSY,P/N 1129-00,F/SHAKER | FLOAT MOUNT ASSEMBLY, P/N 1129-00, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, 4″X3″ | | 35 | SUPPORT ASSY,P/N 16710-03,F/SHALE SHAKER | SUPPORT ASSEMBLY, P/N 16710-03, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, CROSS-.250X.750X40.500 | | 36 | HEATER ELEMENT,P/N SQD-B7.70,F/SHAKER | HEATER ELEMENT, P/N SQD-B7.70, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504 | | 37 | PROTECTOR,STGR,P/N 3660-05-30,F/SHAKER | PROTECTOR, STRINGER-26″, P/N 3660-05-30, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, NO NCH NITL | | 38 | PUSH BUTTON,P/N SQD-2510-MC03,F/SHAKER | PUSH BUTTON, P/N SQD-2510-MC03, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, MANUAL STARTER ONLY | | 39 | BOLT ASSY,P/N G0008680,F/SHALE SHAKER | BOLT ASSEMBLY, P/N G0008680, FOR SHALE SHAKER-UNDERSIDE TENSIONING-FLC500, MAKE: DERRICK, MODEL: FLC504 | | 40 | SUPPORT ASSY,P/N 16710-01,F/SHALE SHAKER | SUPPORT ASSEMBLY, P/N 16710-01, FOR SHALE SHAKER, MAKE: DERRICK, MODEL: FLC504, SIDE-.250X.750X27.375 | | 41 | WRENCH ASSY, P/N 14734-01,F/SHALE SHAKER | WRENCH ASSEMBLY, P/N 14734-01, FOR SHALE SHAKER-TENSIONING-500 SERIES, MAKE: DERRICK, MODEL: FLC504 | | 42 | GREASE, VIBRATOR SHC-100, 10-OZ TUBE | GREASE, VIBRATOR SHC-100, 10-OZ TUBE, FOR SHALE SHAKER VIBRATOR MOTOR, MODEL: SGX-38-18-460/480-6-001, MAKE: DERRICK, P/N: G0002250 | | 43 | GREASE,BEARING KLUBER,400G, SHALE SHAKER | GREASE, BEARING KLUBER, ISOFLEX TOPAS, NB 52, CARTRIDGE: 400 G, TEMP: -50-120 DEG C, FOR SHALE SHAKER, MODEL: CDX18-5900, MAKE: AL SWACO, P/N: 2863029 | | 44 | RUBBER MULTIPLEX SPRING, F/ SHALE SHAKE | RUBBER MULTIPLEX SPRING, FOR SHALE SHAKER (CHINESE), MODEL CQ-2L, P/N: # MR 120. | | 45 | RUBBER VIBRATION ISOLATING STRIP | RUBBER VIBRATION ISOLATING STRIP, FOR SHALE SHAKER (CHINESE), MODEL CQ- 2L, P/N# L-650 | | 46 | BRG, KING COBRA II, BRANDT | BEARING FOR SHALE SHAKER MOTORS MAKE BRANDT MODEL KING COBRA II, P/N: NJ2312 ET VP C3 | | 47 | CONTACTOR, KING COBRA II, BRANDT | ALLEN BRADLEY CONTACTOR, COIL VOLT 480V 60HZ, FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 100-C23- -10-C | | 48 | HARDENED THICK WSH, KING COBRA II | HARDENED THICK WASHER FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: LC2A14014 | | 49 | 12-POINT 3/4 10UNC X 4 1/2, KING COBRA | 12-POINT 3/4 10UNC X 4 1/2???? FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 22AAL | | 50 | LOCTITE PRODUCT 243, KING COBRA II | LOCTITE PRODUCT 243 (HEAVY COAT) FOR SHALE SHAKER MODEL KING COBRA II, MAKE -BRANDT, P/N: 18N | | 51 | WSH, KING COBRA II, BRANDT | WASHER FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 36AR | | 52 | HEAVY HEX JAM NUT, KING COBRA II, BRANDT | HEAVY HEX JAM NUT FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 35EA | | 53 | HEAVY HEX NUT, KING COBRA II, BRANDT | HEAVY HEX NUT, TORQUED TO 380 FT-LB (515 N.M) FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: 35DZ | | 54 | SPOOL SPRING (BACK SPRING), KING COBRA | SPOOL SPRING (BACK SPRING)FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: LF3C10426 | | 55 | FRONT SPRING, KING COBRA II, BRANDT | FRONT SPRING FOR SHALE SHAKER MODEL KING COBRA II, MAKE – BRANDT, P/N: LF3B00936 | | 56 | COVER FOR ROD, MONGOOSE, MI SWACO | COVER FOR ROD FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 58- 06-771 | | 57 | JACK WITH TOP PLATE, MONGOOSE, MI | JACK WITH TOP PLATE, ACTION JACK FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 58-53-009 | | 58 | RUBBER DECK FOAM, NEOPRENE, MI SWACO | RUBBER DECK FOAM RUBBER NEOPRENE (66FT/BOX) FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 58-71-650 | | 59 | SPRING COIL 7″, MONGOOSE, MI SWACO | SPRING COIL 7 ” FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N- 9360007 | | 60 | BOOT SPRING 4.83X4.78 X 6.25 MI SWACO | BOOT SPRING 4.83 OD X 4.78 ID X 6.25 NITRITE FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N- 5804004 | | 61 | JACK ASSY LIFTING DECK, MONGOOSE,SWACO | JACK ASSY LIFTING DECK, MANUAL DECK ANGLE ADJST FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N 9671681 | | 62 | WSH SPRING ISOLATION, MONGOOSE | WASHER SPRING ISOLATION HIGH GRADE NITRILE, FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 5895002 | | 63 | GROMMET SCREW .273 SQ , MONGOOSE | GROMMET SCREW .273 SQ PANEL HOLE PANEL THICK .031-.156 SHALE SHAKER MODEL MONGOOSE, MI SWACO, P/N: 07-415 | | 64 | SCREW FLAT HEAD CRSK 8-32 X 1″ SWACO | SCREW FLAT HEAD CRSK 8-32 X 1″ 304 S/STEEL SQ DRIVE FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 1441471 | | 65 | REPAIR CLIPS, MONGOOSE, MI SWACO | REPAIR CLIPS FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9672223 | | 66 | SELF PIERCING SCREW, MONGOOSE | SELF PIERCING SCREW FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 04-1511 | | 67 | PLATE RIGHT INDICATOR, MONGOOSE | PLATE RIGHT INDICATOR FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9671744 | | 68 | PLATE LEFT INDICATOR MONGOOSE, SWACO | PLATE LEFT INDICATOR FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 9671745 | | 69 | HHCS M12 x 45MM MONGOOSE SWACO | HHCS M12 x 45MM LONG FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 04-1270 | | 70 | HEX NUT M12 , MONGOOSE, MI SWACO | HEX NUT M12 FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 03-415 | | 71 | FLAT WSH M12 REG , MONGOOSE | FLAT WASHER M12 REG FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 05-305 | | 72 | LOCK WSH M12 REG , MONGOOSE | LOCK WASHER M12 REG FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 05-306 | | 73 | MOTOR 0.6HP, 230/460 V, 60 Hz MI SWACO | MOTOR 0.6HP, 230/460 V, 60 Hz FOR SHALE SHAKER MODEL MONGOOSE, MAKE MI SWACO, P/N: 6912002 | | 74 | HEX HEAD CAP SCREW, M20-2.5 X 70MM LONG | HEX HEAD CAP SCREW, M20-2.5 X 70MM LONG, F/ SHALE SHAKER, MDL: MONGOOSE, MAKE: MISWACO, P/N: 04-1629 | | 75 | WEIGHT COVER, F/ SHALE SHAKER, MI SWACO | WEIGHT COVER, FOR SHALE SHAKER MODEL: MONGOOSE, MAKE : MI SWACO, MODEL: CDX18-5900, P/N: 517349 | | 76 | WEIGHT COVER ORING, F/ SHALE SHAKER MOD | WEIGHT COVER ORING, FOR SHALE SHAKER MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 508619 | | 77 | SCREW, SHC, M8 X 25, F/ SHALE SHAKER | SCREW SHC, M8 X 25 FOR SHALE SHAKER MDL: MONGOOSE CDX18-5900, MI SWACO, P/N: 515508 | | 78 | WASHER, SCHNORR D8, F/ SHALE SHAKER | WASHER, SCHNORR D8, FOR SHALE SHAKER MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 513004 | | 79 | SCREW, F/ SHALE SHAKER, MDL: MONGOOSE | SCREW, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 515505 (FIG8B, MODEL: CDX18-2100 ) | | 80 | LOCK NUT CONDUIT,3/4″,NPT,F/SHALE SHAKER | LOCK NUT CONDUIT, 3/4″, NPT, F/ SHALE SHAKER MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-184 | | 81 | SCREW, F/ SHALE SHAKER, MDL: MONGOOSE | SCREW, FOR SHALE SHAKER, MDL: MONGOOSE (CDX18-2100 (601149), MI SWACO, P/N: 515509 (FRAME 88.30) | | 82 | O-RING, FOR SHALE SHAKER, MDL: MONGOOSE | O-RING, FOR SHALE SHAKER, MDL: MONGOOSE CDX18-2100, 601149, MAKE: MI SWACO, P/N: 508620, FRAME 88.30 | | 83 | HEXA HEAD CAP SCREW,M12X30 LONG,MI SWACO | HEXA HEAD CAP SCREW, M12X30 LONG, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 04-1157 | | 84 | POP RIVET 1/8″, F/ SHALE SHAKER,MI SWACO | POP RIVET 1/8″, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 07-409 | | 85 | MS WELD FLANGE COVER, 10″ | MS WELD FLANGE COVER, 10″, FOR SHALE SHAKER, MODEL: MONGOOSE, MI SWACO, P/N: 9671652-01 | | 86 | RING GASKET, ANSI FLANGE RF, 150LB, 10″ | RING GASKET, ANSI FLANGE RF, 150LB, 10″ ,F/ SHALE SHAKER, MDL: MONGOOSE, MAKE: MI SWACO, P/N:3916067 | | 87 | BASKET ASSY, F/ SHALE SHAKER, MDL | BASKET ASSEMBLY, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671738-01 | | 88 | WELDMENT HEADER BOX, F/ SHALE SHAKER | WELDMENT HEADER BOX, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671810 | | 89 | GATE SKID SLIDE, FOR SHALE SHAKER | GATE SKID SLIDE, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671779 | | 90 | SHIPPING BRACKET, F/ SHALE SHAKER, SWACO | SHIPPING BRACKET, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671742 | | 91 | FLAT WASHER, M20, FOR SHALE SHAKER | FLAT WASHER, M20, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-296 | | 92 | LOCKWASHER, M20, FOR SHALE SHAKER | LOCKWASHER, M20, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-307 | | 93 | SPRING SPOOL WELDMENT, FOR SHALE SHAKER | SPRING SPOOL WELDMENT, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671679 | | 94 | INDICATOR POINTER, FOR SHALE SHAKER | INDICATOR POINTER, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 9671683 | | 95 | LOCKWASHER, M24, FOR SHALE SHAKER | LOCKWASHER, M24, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-309 | | 96 | BOOT SPRING, F/ SHALE SHAKER,MI SWACO | BOOT SPRING, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 5804004 | | 97 | I/0 PLUG COVER, 6 DIA, NITRILE | I/0 PLUG COVER, 6 DIA, NITRILE, FOR SHALE SHAKER, MODEL: MONGOOSE, MI SWACO, P/N: S48K00827-NL | | 98 | HEX NUT, M24, FOR SHALE SHAKER | HEX NUT, M24, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 03-412 | | 99 | FLATWASHER, M24, FOR SHALE SHAKER | FLATWASHER, M24, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 05-308 | | 100 | TIMER, INPUT 110-120 VAC,F/ SHALE SHAKER | TIMER, INPUT 110-120 VAC, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: GT3F-1AF.20 | | 101 | O/LOAD RELAY , 5-10 A, FOR SHALE SHAKER | O/LOAD RELAY , 5-10 A, FOR SHALE SHAKER, MDL: MONGOOSE, MAKE: MI SWACO, P/N: 193-TAC10 | | 102 | HEX NUT, M16-1.5, YELLOW CHROMATE | HEX NUT, M16-1.5, YELLOW CHROMATE, FOR SHALE SHAKER, MDL: MANGOOSE, MAKE: MI SWACO, P/N: 1305040 | | 103 | LOCK WASHER, SCHNORR, F/ SHALE SHAKERS | LOCK WASHER, SCHNORR, M20, FOR SHALE SHAKER, MDL: MANGOOSE, MI SWACO, P/N: 05-244 | | 104 | MOTOR WASHER, FOR SHALE SHAKER | MOTOR WASHER, FOR SHALE SHAKER, MODEL: MANGOOSE, MAKE: MI SWACO, P/N: BM6S20043-01 | | 105 | WASHER, 16 MM MOTOR, F/ SHALE SHAKER | WASHER, 16 MM MOTOR, FOR SHALE SHAKER, MODEL: MANGOOSE, MAKE: MI SWACO, P/N: 9671682 | | 106 | LOCKWASHER SCHNORR, M16, F/SHALE SHAKER | LOCKWASHER SCHNORR, M16, FOR SHALE SHAKER, MODEL: MANGOOSE, MAKE: MI SWACO, P/N: 05-248 | | 107 | CHANNEL RUBBER, DERRRICK SHALE SHAKER | CHANNEL RUBBER- FOR DERRRICK SHALE SHAKER, P/N: G0003402 | | 108 | MOTOR, VSM-300, NOV BRANDT | MOTOR (2.68KW DOUBLE SHAFTED TENV MOTOR) FOR SHALE SHAKER, MODEL VSM- 300, MAKE NOV BRANDT, P/N: 300/01/033 | | 109 | MAIN BRG, VSM-300, NOV BRANDT | MAIN BEARING FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/1/011 | | 110 | PRIMARY SEAL PNEUMOSEAL, VSM-300, NOV | PRIMARY SEAL PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/02/009 | | 111 | SECONDARY SEAL PNEUMOSEAL, VSM-300 | SECONDARY SEAL PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/02/010 | | 112 | MOTOR SHAFT CPLG, VSM-300, NOV | MOTOR SHAFT COUPLING FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/018 | | 113 | O RINGS, VSM-300, NOV BRANDT | O-RINGS FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/013 | | 114 | EXT CIRCLIPS, VSM-300, NOV BRANDT | EXTERNAL CIRCLIPS FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/014 | | 115 | SHAFT SEAL, VSM-300, NOV BRANDT | SHAFT SEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/012 | | 116 | V- RINGS, VSM-300, NOV BRANDT | V- RINGS FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/01/015 | | 117 | M.16 NORD- LOCK WSH, VSM-300, NOV | M.16 NORD- LOCK WASHER (PAIR) FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: SS NLW M16 | | 118 | M.20 NORD- LOCK WSH, VSM-300, NOV | M.20 NORD- LOCK WASHER (PAIR) FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: SS NLW M20 | | 119 | 400GM CART GREASE, VSM-300, NOV | 400GM CARTRIDGE GREASE FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/06/003 | | 120 | THERMISTOR RELAY, VSM-300, NOV BRANDT | THERMISTOR RELAY FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/004 | | 121 | OVERLOAD 6-9 AMP, VSM-300, NOV BRANDT | OVERLOAD 6-9 AMP FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/006 | | 122 | CONTACTOR 7.5 KW, VSM-300, NOV BRANDT | CONTACTOR 7.5 KW FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/005 | | 123 | PRIMARY FUSE, VSM-300, NOV BRANDT | PRIMARY FUSE FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/010 | | 124 | SECONDARY FUSE, VSM-300, NOV BRANDT | SECONDARY FUSE FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/012 | | 125 | RELAY, VSM-300, NOV BRANDT | RELAY FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/03/037 | | 126 | MAIN BRGVSM 300, MAKE : BRANDT | MAIN BEARING FOR SHALE SHAKER, MODEL VSM 300, MAKE : BRANDT, P/N: 300/01/011 | | 127 | MOUNTING SPRING PAD VSM-300, BRANDT | MOUNTING SPRING PAD FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, OLD P/N: 300/05/004, P/N: 17780959-001 | | 128 | 3 WAY VLV VSM-300, MAKE: BRANDT | 3 WAY VALVE FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/04/005 | | 129 | NON RETURN VLV VSM-300, BRANDT | NON RETURN VALVE FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/04/006 | | 130 | MOUNTING SPRING VSM-300, BRANDT | MOUNTING SPRING FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/05/003 | | 131 | COUPLING ASSY, FOR SHALE SHAKER, BRANT | COUPLING ASSY, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/01/19 | | 132 | ELECTRIC MOTOR, FOR SHALE SHAKER, BRANDT | ELECTRIC MOTOR, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/01/017 | | 133 | VITON STRIP SEAL BAR, FOR SHALE SHAKER | VITON STRIP SEAL BAR, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: 300/02/015 | | 134 | EMERGENCY STOP STATION, FOR SHALE SHAKER | EMERGENCY STOP STATION, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/089 | | 135 | FAULT INDICATOR LIGHT (RED), BRANDT | FAULT INDICATOR LIGHT (RED), FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/018 | | 136 | RESET PUSH BOTTON, F/ SHALE SHAKER | RESET PUSH BOTTON, FOR SHALE SHAKER, MDL: VSM – 300, BRANDT, P/N: 300/03/016 ( DOCUMENT NO 314-013) | | 137 | AMMETER, F/ SHALE SHAKER, MDL: VSM | AMMETER, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/014 (DOCUMENT NO 314-013) | | 138 | ISOLATOR SWITCH FOR SHALE SHAKER | ISOLATOR SWITCH FOR SHALE SHAKER, MDL: VSM – 300, BRANDT, P/N: 300/03/049A ( DOCUMENT NO 314-013 | | 139 | SECONDARY TX CIRCUIT BREAKER, F/ SHALE | SECONDARY TX CIRCUIT BREAKER, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/075 | | 140 | TRANSF/MER, F/ SHALE SHAKER | TRANSFORMER, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/036 | | 141 | CONTACTOR, 7.5 KW, F/ SHALE SHAKER | CONTRACTOR, 7.5 KW, FOR SHALE SHAKER, MODEL: VSM – 300, BRANDT, P/N: 300/03/005A | | 142 | CHOKE UNIT, 2.5 MH, F/SHALE SHAKER | CHOKE UNIT, 2.5 MH, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/065 | | 143 | INVERTER, 11KW, FOR SHALE SHAKER | INVERTER, 11KW, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/03/070 | | 144 | NORD-LOCK WASHER-M12, FOR SHALE SHAKER | NORD-LOCK WASHER-M12, FOR SHALE SHAKER, MDL: VSM – 300, MAKE: BRANDT, OLD P/N: SSNLW M12, P/N: 001-09B-112 | | 145 | PNEUMATIC CONTROL PANEL, F/ SHALE SHAKER | PNEUMATIC CONTROL PANEL, FOR SHALE SHAKER, MODEL: VSM – 300, MAKE: BRANDT, P/N: 300/04/001 | | 146 | ISOFLEX TOPAS GREASE, COMMON SPARES | ISOFLEX TOPAS GREASE FOR CENTRIFUGAL PUMP <(>&<)> SHALE SHAKER, MODEL: NB 52 | | 147 | FRONT SPRING MOUNT BRACKET ASSY,VSM-300 | FRONT SPRING MOUNT BRACKET ASSY,VSM-300FOR SHALE SHAKER,MAKE:NOV BRANDTMODEL:VSM-300, P/N: 300-02-002 | | 148 | REAR SPRING MOUNT BRACKET ASSY,VSM-300 | REAR SPRING MOUNT BRACKET ASSY,VSM-300FOR SHALE SHAKER,MAKE:NOV BRANDTMODEL:VSM-300, P/N: 300-02-004 | | 149 | GLAND,CABLE,CORD GRIP,3/4″,SHAKER MOTOR | GLAND, CABLE, CORD GRIP, 3/4″NPT, FOR MANGOOSE PLATFORM SHALE SHAKER MOTOR POWER CABLE, P/N: 01-1888 | | 150 | CABLE ELEC,14/4 STD EXANE,ARMORED/JACKET | CABLE ELEC, 14/4 STANDARD EXANE, ARMORED/JACKETED, FOR MANGOOSE PLATFORM SHALE SHAKER MOTOR, P/N: 7906231 | | 151 | CLAMP, SS 3 HOSE, 2 HALVES MAKE 1 CLAMP | CLAMP, STAINLESS STEEL 3 HOSE, 2 HALVES MAKE 1 CLAMP FOR SHALE SHAKER POWER CABLE, P/N: 00-1665 | | 152 | ELBOW,CONDUIT,EP 90D, 3/4 MPT X 3/4 FPT | ELBOW, CONDUIT, EP 90D, 3/4 MPT X 3/4 FPT, FOR SHALE SHAKER MOTOR TERMINAL BOX, P/N: 5030937 | | 153 | CABLE, 14GA, 4 COND, SHALE SHAKER | CABLE, 14GA, 4 CONDUCTOR, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1688 | | 154 | GLAND, CABLE, 3/4″ NPT, SHALE SHAKER | GLAND, CABLE, 3/4″ NPT, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1904 | | 155 | SHROUD, RUBBER, SHALE SHAKER, KING COBRA | SHROUD, RUBBER, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1903 | | 156 | CLAMP, CABLE, SHALE SHAKER, KING COBRA | CLAMP, CABLE, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 01-1902 | | 157 | CORD GRIP, SHALE SHAKER,KING COBRA, NOV | CORD GRIP, SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT NOV, P/N: 41F | | 158 | GAUGE,PRES,0-100PSI,SHALE SHAKER,VSM300 | GAUGE, PRESSURE, 0-100PSI, FOR SHALE SHAKERS, MODEL: VSM 300, MAKE: BRANDT, OLD P/N: 300/04/004, P/N: P4A0052372 | | 159 | MOTOR,2HP,230/460 V,60 Hz,SHALE SHAKER | MOTOR, 2 HP, 230/460 V, 60 Hz FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, ( FIG: 34 PART LIST FOR 9671740-11), P/N: EM3C00011 | | 160 | BRACKET, SHIPPING, FRONT,SHALE SHAKER | BRACKET, SHIPPING, FRONT, FOR SHALE SHAKER, MODEL: VSM-300, ,MAKE: NOV BRANDT, P/N: CPSB3/4X370 | | 161 | BRACKET, SHIPPING, REAR,SHALE SHAKER | BRACKET, SHIPPING, REAR, FOR SHALE SHAKER, MODEL: VSM-300, ,MAKE: NOV BRANDT, P/N: CPSB3/4X310 | | 162 | BRACKET, SHIPPING, HARDWARE,SHALE SHAKER | BRACKET, SHIPPING, HARDWARE, FOR SHALE SHAKER, MODEL: VSM-300, ,MAKE: NOV BRANDT, P/N: CPPLN3/4 | | 163 | BEARING, SHALE SHAKER, MONGOOSE SHAKER | BEARING, SHALE SHAKER, MONGOOSE SHAKER, MAKE: MI SWACO, MOTOR MODEL: CDX18-5900, P/N: NJ2310E TVP2.C4.QP51 | | 164 | MOTOR,VIBRATING,2HP,230/460V,SHALE SHKER | MOTOR, VIBRATING, 2HP, 230/460 V, 60 HZ, 3 PH, FRAME 60, FOR SHALE SHAKER, MODEL: MONGOOSE SHAKER, MAKE: MI SWACO, P/N: CDX18-5900 | | 165 | SWITCH, SEL, 2WAY, 1POLE, SHALE SHAKER | SWITCH, SELECTOR, 2 WAYS, 1 POLE, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7578000 | | 166 | SWITCH, PB, EMERG STOP, SHALE SHAKER, | SWITCH, PUSH BUTTON, EMERGENCY STOP, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7573013 | | 167 | HANDLE, EXTERNAL FRONT, SHALE SHAKER | HANDLE, EXTERNAL FRONT, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 8045001 | | 168 | CONTACTOR, NC, SHALE SHAKER, MONGOOSE | CONTACTOR, NORMALLY CLOSED, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7150011 | | 169 | CONTACTOR, NO, SHALE SHAKER, MONGOOSE | CONTACTOR, NORMALLY OPENED, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 7150012 | | 170 | PUSH BUTTON,XHDPBS,1RED,1GREEN STOP/STAR | PUSH BUTTON, XHDPBS, 1 RED, 1 GREEN STOP START (MI SWACO P/N: FOR REFERENCE. 7573018) FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 20042 | | 171 | CONTACT BLOCK, DT1A /BT 1B CB 1NO/1NC | CONTACT BLOCK, DT1A /BT 1B CB 1NO / 1NC (MI SWACO P/N: FOR REFERENCE. 8006281) FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: 5172-1A | | 172 | BEARING, ROLLER, SHALE SHAKER MOTOR, CDX | BEARING, ROLLER, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 506563 | | 173 | COVER, BEARING, SHALE SHAKER MOTOR, CDX | COVER, BEARING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 303081 | | 174 | WEIGHT ADJ DISC, RIGHT, SHALE SHAKER MOT | WEIGHT ADJUSTMENT DISC, RIGHT, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 51 8174 | | 175 | WEIGHT ADJ DISC, LEFT, SHALE SHAKER MOTO | WEIGHT ADJUSTMENT DISC, LEFT, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 51 8175 | | 176 | RING, INTERNAL SNAP, SHALE SHAKER MOTOR | RING, INTERNAL SNAP, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 500008 | | 177 | O-RING, SHALE SHAKER MOTOR, CDX18-5900 | O-RING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 508548 | | 178 | SCREW, SCH M3X25, SHALE SHAKER MOTOR | SCREW, SCH M3 X 25, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 509056 | | 179 | KEY,10X8X22,SHALE SHAKER MOTOR,CDX185900 | KEY, SIZE: 10 X 8 X 22, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 506044 | | 180 | V RING, SHALE SHAKER MOTOR, CDX18-5900 | V RING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 502084 | | 181 | SCREW, SCH M12X45, SHALE SHAKER MOTOR | SCREW, SCH M12 X 45, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 515612 | | 182 | FLANGE, SHALE SHAKER MOTOR, CDX18-5900 | FLANGE, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 301254 | | 183 | SNAP RING, SHALE SHAKER MOTOR,CDX18-5900 | SNAP RING, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, PART NO: FM3C00110, MAKE: MI SWACO, P/N: 500058 | | 184 | START PUSH-BUTTON, SHALE SHAKER, SM300 | START PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901625 | | 185 | STOP PUSH-BUTTON, SHALE SHAKER, SM300 | STOP PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901624 | | 186 | LOW PUSH-BUTTON, SHALE SHAKER, SM300 | LOW PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901626 | | 187 | BOOST PUSH-BUTTON, SHALE SHAKER, SM300 | BOOST PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901627 | | 188 | NORMAL PUSH-BUTTON, SHALE SHAKER, SM300 | NORMAL PUSH-BUTTON, FOR SHALE SHAKER, MODEL: SM300, MAKE: BRANDT, P/N: PX99901628 | | 189 | HANDLE,BUTTERFLY VALVE 10″ SHAKER,VSM300 | HANDLE, BUTTERFLY VALVE SIZE: 10″ FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV-BRANDT, VALVE MAKE: TOMOE, P/N: 001-431-065 | | 190 | REAR SPRING, SHALE SHAKER,KING COBRA,NOV | REAR SPRING, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: LM3B13614 | | 191 | JACK SUB-ASSY, SHALE SHAKER,KING COBRA | JACK SUB-ASSEMBLY, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 9738 | | 192 | WEDGE, SHALE SHAKER, KING COBRA, NOV | WEDGE, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 26EZ | | 193 | BYPASS VALVE SUB ASSY, SHALE SHAKER,KING | BYPASS VALVE SUB ASSEMBLY, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 9719 | | 194 | SCREW, 3/4-10 UNC X 4 1/2″ XYLAN, SHAKER | SCREW, 3/4-10 UNC X 4 1/2″ XYLAN, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 22BCJ | | 195 | NUT,HEX,3/4-10 UNC HVY HEX. XYLAN,SHAKER | NUT, HEX, 3/4-10 UNC HEAVY HEX. XYLAN, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 35FJ | | 196 | CROWN RUBBER POLYURETHANE, BLACK,SHAKER | CROWN RUBBER POLYURETHANE, (BLACK), FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 11607 | | 197 | GASKET, 2″ VICTAULIC, SHALE SHAKER, KING | GASKET, 2″ VICTAULIC, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 10E | | 198 | CLAMP, 2″VICTAULIC W/GASKET,SHALE SHAKER | CLAMP, 2″ VICTAULIC W/GASKET, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 14A | | 199 | CONE ASSY, COMP. (DESILTER),SHALE SHAKER | CONE ASSEMBLY, COMPLETE (DESILTER), FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 26AW | | 200 | CAP, 2″VICTAULIC,SHALE SHAKER,KING COBRA | CAP, 2″ VICTAULIC, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 42A | | 201 | OVERFLOW ELBOW,SHALE SHAKER, KING COBRA | OVERFLOW ELBOW, FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 44J | | 202 | CONE CLAMP,2BOLT COMP,SHALE SHAKER, KING | CONE CLAMP, 2-BOLT COMPLETE , FOR SHALE SHAKER 11097-0060, MODEL: KING COBRA, MAKE: NOV, P/N: 14P | | 203 | HHCS, 3/8″ 16UNC X 3/4″; 22JN, SHAKER | HHCS, 3/8″ 16UNC X 3/4″; 22JN, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22JN | | 204 | HHCS, 3/8″ 16UNC X 1-1/2, SHALE SHAKER | HHCS, 3/8″ 16UNC X 1-1/2, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22PY | | 205 | NUT, HEX LOCK, 3/8″, SHALE SHAKER | NUT, HEX LOCK, 3/8″, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 35CD | | 206 | HHCS, 3/8″-16UNC X 1-1/4″, SHALE SHAKER | HHCS, 3/8″-16UNC X 1-1/4″, GR-1 SST, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22OS | | 207 | HHCS, 1/2-13UNC X 3/4″, SHALE SHAKER | HHCS, 1/2-13UNC X 3/4″, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 22NB | | 208 | PIVOT STAND, SHALE SHAKER KING COBRA | PIVOT STAND, FOR SHALE SHAKER 10995-0169, MODEL: KING COBRA, MAKE: NOV, P/N: 9862 | | 209 | CYLINDER, ATEX, SHALE SHAKER, AX-1,AXIOM | CYLINDER, ATEX, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF-2997 | | 210 | BEARING, MAIN DRIVE, SHALE SHAKER, AX-1 | BEARING, MAIN DRIVE, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-BG22313-E-VA405 | | 211 | BEARING,ROLLER,TENSION,SHALE SHAKER,AX-1 | BEARING, ROLLER, TENSION, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-BG6205 | | 212 | SEAL, LABRYNTH, SHALE SHAKER, AX-1,AXIOM | SEAL, LABRYNTH, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0651 | | 213 | SEAL, MAIN SHAFT,SHALE SHAKER,AX-1,AXIOM | SEAL, MAIN SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-S65100 | | 214 | CIRCLIP,BEARING HOUSING,SHALE SHAKER,AX1 | CIRCLIP, BEARING HOUSING, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-C1300140 | | 215 | CIRCLIP, MAIN SHAFT, SHALE SHAKER, AX-1 | CIRCLIP, MAIN SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-C140065 | | 216 | O-RING, END CAP, SHALE SHAKER,AX-1,AXIOM | O-RING, END CAP, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-OR2495-30 | | 217 | BELT, DRIVE,”B” SECTION 45″ SHALE SHAKER | BELT, DRIVE, “B” SECTION 45″ FRAS RATED, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-B45-DB | | 218 | NIPPLE,GREASE, 6MM STRAIGHT,SHALE SHAKER | NIPPLE, GREASE, 6MM STRAIGHT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-GN-S06 | | 219 | NIPPLE,GREASE, 6MM EXTENDED,SHALE SHAKER | NIPPLE, GREASE, 6MM EXTENDED, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-GN-E06 | | 220 | BUSH, TAPERLOCK, 2012/38, SHALE SHAKER | BUSH, TAPERLOCK, 2012/38, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-T201238 | | 221 | BUSH, TAPERLOCK, 2012/50, SHALE SHAKER | BUSH, TAPERLOCK, 2012/50, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: DC-T201250 | | 222 | KEY, MAIN SHAFT, SHALE SHAKER,AX-1,AXIOM | KEY, MAIN SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0291 | | 223 | RUBBER EXTRUSION, MK IV,FIXED FRAME,AX-1 | RUBBER EXTRUSION, MK IV, FIXED FRAME, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3769 | | 224 | CLAMPING SYS, FIXED FRAME PNEU, SHAKER | CLAMPING SYSTEM, FIXED FRAME PNEUMATIC, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/2537 | | 225 | PACKER, FLOW CONTROL, SHALE SHAKER, AX-1 | PACKER, FLOW CONTROL, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0378 | | 226 | BRAIDED HOSE, LONG, CLAMPING SYS, AX-1 | BRAIDED HOSE, LONG, CLAMPING SYSTEM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2569 | | 227 | ELBOW, 1/4 NPT-NO4 JIC SWIVEL 90DEG,AX-1 | ELBOW, 1/4 NPT- NO4 JIC SWIVEL 90 DEG, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2576 | | 228 | BRAIDED HOSE, SHORT, CLAMPING SYS, AX-1 | BRAIDED HOSE, SHORT, CLAMPING SYSTEM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2568 | | 229 | HOSE, PNEU PACKER, 580MM, SHALE SHAKER | HOSE, PNEUMATIC PACKER, 580MM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: PF/2913 | | 230 | FITTING TOOL, BELT, SHALE SHAKER, AX-1 | FITTING TOOL, BELT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/1163 | | 231 | SUPPORT TOOL, SHAFT, SHALE SHAKER, AX-1 | SUPPORT TOOL, SHAFT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/1147 | | 232 | BOLT, HEX, M12X60-A480,SHALE SHAKER,AX-1 | BOLT, HEX, SIZE: M12 X 60- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-2060-A480 | | 233 | BOLT, M12X55-A480, SHALE SHAKER, AX-1 | BOLT, SIZE: M12 X 55- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-2055-A480 | | 234 | BOLT, HEX, M12X40-A480,SHALE SHAKER,AX-1 | BOLT, HEX, SIZE: M12 X 40- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-2040-A480 | | 235 | SET SCREW, M12X20-A480,SHALE SHAKER,AX-1 | SET SCREW, SIZE: M12 X 20- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-1020-A480 | | 236 | SET SCREW, M12X25-A480,SHALE SHAKER,AX-1 | SET SCREW, SIZE: M12 X 25- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-1025-A480 | | 237 | SET SCREW, M12X90-A480,SHALE SHAKER,AX-1 | SET SCREW, SIZE: M12 X 90- A480, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-1090-A480 | | 238 | WASHER,NORDLOCK,M12-SS,PAIR,SHALE SHAKER | WASHER, NORDLOCK, M12- SS (PAIR), FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-7200 | | 239 | NUT, PLAIN, M12- SS, SHALE SHAKER, AX-1 | NUT, PLAIN, M12- SS, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: MF12S-6000 | | 240 | RELAY, THERMISTOR, SHALE SHAKER, AX-1 | RELAY, THERMISTOR, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0139 | | 241 | OVERLOAD, 8 – 11A, SHALE SHAKER, AX-1 | OVERLOAD, 8 – 11A, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0143 | | 242 | CONTACTOR, 15KW, SHALE SHAKER, AX-1 | CONTACTOR, 15KW, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0142 | | 243 | MCB, 25A, 3POLE, TYPE K,ABB,SHALE SHAKER | MCB, 25A, 3 POLE, TYPE K, ABB, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0827 | | 244 | MCB, 1A, 2POLE, TYPE K, ABB,SHALE SHAKER | MCB, 1A, 2 POLE, TYPE K, ABB, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0828 | | 245 | MCB, 2A, 2POLE, TYPE K, ABB,SHALE SHAKER | MCB, 2A, 2 POLE, TYPE K, ABB, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0829 | | 246 | RELAY, 5A, SHALE SHAKER, AX-1, AXIOM | RELAY, 5A, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0144 | | 247 | RELAY, 3A, SHALE SHAKER, AX-1, AXIOM | RELAY, 3A, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0145 | | 248 | INVERTOR DRIVE, SHALE SHAKER, AX-1,AXIOM | INVERTOR DRIVE, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: ELEC-0396 | | 249 | RUBBER,MOUNTING SPRING,AX-1,SHALE SHAKER | RUBBER, MOUNTING SPRING, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0250 | | 250 | SPRING, MOUNTING, AX-1, SHALE SHAKER | SPRING, MOUNTING, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0252 | | 251 | PULLEY ASSY,TENSIONER, AX-1,SHALE SHAKER | PULLEY ASSY, TENSIONER, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3779 | | 252 | DRIVE PULLEY, (MAIN SHAFT), SHALE SHAKER | DRIVE PULLEY, (MAIN SHAFT), FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0356 | | 253 | COOLING FAN, SHALE SHAKER, AX-1, AXIOM | COOLING FAN, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0112 | | 254 | MOTOR, DRIVE PULLEY, SHALE SHAKER, AX-1 | MOTOR, DRIVE PULLEY, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0357 | | 255 | TENSIONER TOOL, BELT, SHALE SHAKER, AX-1 | TENSIONER TOOL, BELT, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: TOOL-0681 | | 256 | INSTALLATION TOOL, CLAMPING SYS, AX-1 | INSTALLATION TOOL, CLAMPING SYSTEM, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/3045 | | 257 | HOUSING, MAIN BEARING, AX-1,SHALE SHAKER | HOUSING, MAIN BEARING, AX-1, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0292 | | 258 | TENSIONER ASSY, DRIVE, SHALE SHAKER,AX-1 | TENSIONER ASSY, DRIVE, FOR SHALE SHAKER, MODEL: QUAD AX-1, MAKE: AXIOM, P/N: APL/0307 | | 259 | SPRING, REAR, SHALE SHAKER, KING COBRA | SPRING, REAR, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID, MAKE: NOV BRANDT, P/N: LF3B13614 | | 260 | CABLE, 6C, 19 FT, SHALE SHAKER, FLC-504 | CABLE, 6C, 19 FT, FOR SHALE SHAKER, MODEL: FLC-504, MAKE: DERRICK, P/N: 1181-01-006 | | 261 | SCREW, SHC M10X30, SHALE SHAKER MOTOR | SCREW, SHC M10 X 30, FOR SHALE SHAKER MOTOR, MODEL: CDX18-5900, MAKE: MI SWACO, P/N: 515538 | | 262 | PLUG, 1/8 NPT,SHALE SHAKER, CDX18-5900 | PLUG, SIZE: 1/8 NPT, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 509059 | | 263 | WEDGE, HAMMER, SHALE SHAKER, VENOM | WEDGE, HAMMER, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: 26EZVNM | | 264 | STRIP, LONG WEAR, SHALE SHAKER, VENOM | STRIP, LONG WEAR, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, OLD P/N: 21970-KIT, P/N: P4A0042613-95-KIT | | 265 | WEAR STRIP, SIDE PINNED, SHALE SHAKER | WEAR STRIP, SIDE PINNED, (NEW), FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: 21184 | | 266 | PIN ASSEMBLY, LOCK, SHALE SHAKER, VENOM | PIN ASSEMBLY, LOCK, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: LM3S00103 | | 267 | RELAY, OVERLOAD, SHALE SHAKER, VENOM | RELAY, OVERLOAD, FOR SHALE SHAKER, MODEL: KING COBRA VENOM, MAKE: NOV, P/N: 24XP | | 268 | FAN, COOLING, SHALE SHAKER, AX1, AXIOM | FAN, COOLING, FOR SHALE SHAKER, MODEL: AX1, MAKE: AXIOM, P/N: ELEC-0461 | | 269 | WASHER, NORDLOCK, M12, LARGE OD, SS | WASHER, NORDLOCK, M12, LARGE OD, SS (PAIR), FOR SHALE SHAKER, MODEL: AX1, MAKE: AXIOM, P/N: MF-12S-7200-SPA480 | | 270 | SCREW, SET, M12X30 -A480, SHALE SHAKER | SCREW, SET, M12X30 -A480, FOR SHALE SHAKER, MODEL: AX1, MAKE: AXIOM, P/N: MF12S-1030-A480 | | 271 | SPRING, SPOOL, SHALE SHAKER, MONGOOSE | SPRING, SPOOL, FOR SHALE SHAKER, MODEL: MONGOOSE, MAKE: MI SWACO, P/N: BM6K80290 | | 272 | PLATE, FRONT DEFLECTOR, SHALE SHAKER | PLATE, FRONT DEFLECTOR, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT, P/N: 300/02/006 | | 273 | SCREW, CAP, SOCKET HEAD, M6 X 15LG | SCREW, CAP, SOCKET HEAD, M6 X 15LG, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: SSCSK M6X15 | | 274 | SCREW, CAP, SOCKET HEAD, M8 X 30LG | SCREW, CAP, SOCKET HEAD, M8 X 30LG, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: SSSKT M8X30 | | 275 | WASHER, NORD-LOCK, M8, SHALE SHAKER | WASHER, NORD-LOCK, M8, FOR SHALE SHAKER, MODEL: VSM-300, MAKE: BRANDT, P/N: SSNLW M8 | | 276 | SCREW, SOCKET HEAD,M12X25LG,SHALE SHAKER | SCREW, SOCKET HEADED, M12 X 25 LONG , FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: SSSKT M12X25 | | 277 | BAR, WEIR, SHALE SHAKER, VSM 300, NOV | BAR, WEIR, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/02/016 | | 278 | WASHER, PLAIN, M12, SHALE SHAKER,VSM 300 | WASHER, PLAIN, M12, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: SSPLWM12 | | 279 | CHUTE, FEED, SHALE SHAKER, VSM 300, NOV | CHUTE, FEED, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV BRANDT, P/N: 300/05/002 | | 280 | REGULATOR, AIR, SHALE SHAKER, AX-1,AXIOM | REGULATOR, AIR, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2447 | | 281 | SWITCH, LATERAL, 3/2, SHALE SHAKER, AX-1 | SWITCH, LATERAL, 3/2, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2451 | | 282 | SWITCH, LATERAL, 5/2, SHALE SHAKER, AX-1 | SWITCH, LATERAL, 5/2, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2453 | | 283 | HOUSING, FABRICATION,SHALE SHAKER,VSM300 | HOUSING, FABRICATION, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: 300/01/002 | | 284 | BOLT, HEX HEAD, M20X110, SHALE SHAKER | BOLT, HEX HEAD, SIZE: M20 X 110, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSHHB M20X110 | | 285 | NUT, HEX HEAD, M20, SHALE SHAKER, VSM300 | NUT, HEX HEAD, M20, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSPLN M20 | | 286 | HOUSING ASSY., PRIMARY CLUMP WEIGHT | HOUSING ASSY., PRIMARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: BRANDT, P/N: 300/01/001a | | 287 | HOUSING ASSY., PRIMARY CLUMP WEIGHT | HOUSING ASSY., SECONDARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: BRANDT, P/N: 300/01/001b | | 288 | BOLT, LONG WEAR STRIP, SHALE SHAKER, NOV | BOLT, LONG WEAR STRIP, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, P/N: 22XQ | | 289 | NUT, SHALE SHAKER, KING COBRA, NOV | NUT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, P/N: 35AR | | 290 | WASHER, SHALE SHAKER, KING COBRA, NOV | WASHER, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, 36AN | | 291 | SCREW, CAP,SOC HD, M12X20LG,SHALE SHAKER | SCREW, CAP, SOCKET HEAD, M12 X 20 LG, FOR SHALE SHAKER, MODEL: VSM 300, MAKE: NOV, P/N: SSSKT M12X20 | | 292 | SCREW, SET, M8X16-A480,SHALE SHAKER,AX-1 | SCREW, SET, M8 X 16 – A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF08S-1016-A480 | | 293 | WASHER,NORDLOCK,M8,SS(PAIR),SHALE SHAKER | WASHER, NORDLOCK, M8, SS (PAIR), FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF08S-7200-A480 | | 294 | RELAY, THERMAL OVERLOAD, 5.5-7.5A, 460V | RELAY, THERMAL OVERLOAD, 5.5-7.5A, 460V, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7152032 | | 295 | TRANSFORMER, 460V, SHALE SHAKER,MONGOOSE | TRANSFORMER, 460V, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7790017 | | 296 | BASE, RELAY, SHALE SHAKER, MONGOOSE PRO | BASE, RELAY, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7150016 | | 297 | RELAY, DPDT, 10A, 120 VAC, SHALE SHAKER | RELAY, DPDT, 10A, 120 VAC, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7150015 | | 298 | BREAKER, CIRCUIT, 460 V, SIZE 4.5-6.3 A | BREAKER, CIRCUIT, 460 V, SIZE 4.5-6.3 A, SIEMENS 3RV10 21 1GA10 (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7510046 | | 299 | BLOCK, AUX CONTACT, 1NO+1NC (ATEX ONLY) | BLOCK, AUX CONTACT, 1NO+1NC (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7573502 | | 300 | TRANSFORMER,0-230-400-460-600-690/0-100V | TRANSFORMER, 0-230-400-460-600-690/0-100 V (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 00A15C012.066 | | 301 | CONTACTOR, 5.5 KW, 110 VAC (ATEX ONLY) | CONTACTOR, 5.5 KW, 110 VAC (ATEX ONLY), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7573503 | | 302 | BREAKER, CIRCUIT, MINIATURE, 3A, 1P, ABB | BREAKER, CIRCUIT, MINIATURE, 3A, 1 POLE, ABB S201UP-K3, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7510037 | | 303 | BREAKER, CIRCUIT, MINIATURE, 1A, 2P, ABB | BREAKER, CIRCUIT, MINIATURE, 1 A, 2 POLE, ABB S202UP-K1, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, MAKE: MI SWACO, P/N: 7510038 | | 304 | SCREW, SOCKET HEAD, A4-70, M5 X 12 C/S | SCREW, SOCKET HEAD, A4-70, M5 X 12 C/S, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF05S-3012-A4-70 | | 305 | ELBOW, PUSH IN, 1/4″BSPX8MM,SHALE SHAKER | ELBOW, PUSH IN, 1/4″ BSP X 8MM, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2405 | | 306 | STRAIGHT,PUSH IN,1/8″BSPX4MM,SHALESHAKER | STRAIGHT, PUSH IN, 1/8″ BSP X 4MM, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2430 | | 307 | PUSH BUTTON, MUSHROOM HEAD, SHALE SHAKER | PUSH BUTTON, MUSHROOM HEAD, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2626 | | 308 | PIECE, Y, PUSH IN, 4MM,SHALE SHAKER,AX-1 | PIECE, Y, PUSH IN, 4MM, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2725 | | 309 | BUTTON, START, W/GREEN BOOT,SHALE SHAKER | BUTTON, START, W/GREEN BOOT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT (NOV), P/N: 24LN | | 310 | BUTTON, STOP, W/RED BOOT, SHALE SHAKER | BUTTON, STOP, W/RED BOOT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: BRANDT (NOV), P/N: 24LO | | 311 | ELBOW, PUSH-IN, 1/8″ BSP X 4 MM, 90 DEG | ELBOW, PUSH-IN, SIZE: 1/8″ BSP X 4 MM, 90 DEG, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2468 | | 312 | ELBOW, PUSH-IN, 1/4″ BSP X 8 MM, 90 DEG | ELBOW, PUSH-IN, SIZE: 1/4″ BSP X 8 MM, 90 DEG, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2724 | | 313 | VALVE, VENTARI, SHALE SHAKER, AX-1,AXIOM | VALVE, VENTARI, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-3022 | | 314 | ELBOW, PUSH-IN, 1/8″ BSP X 8 MM, 90 DEG | ELBOW, PUSH-IN, SIZE: 1/8″ BSP X 8 MM, 90 DEG, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: PF-2406 | | 315 | REGULATOR, AIR, W/GAGE, SHALE SHAKER | REGULATOR, AIR, W/GAGE, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 29AC | | 316 | ACTUATOR, AIR, 20-2, SHALE SHAKER, KING | ACTUATOR, AIR, 20-2, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 59RL | | 317 | VALVE, CHECK, SHALE SHAKER, KING COBRA | VALVE, CHECK, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 31BV | | 318 | CROSS, BP, FEMALE NPT, SHALE SHAKER,KING | CROSS, BP, FEMALE NPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47MU | | 319 | ADAPTOR, 5/32 PILOT-1/4 NPT,SHALE SHAKER | ADAPTOR, 5/32 PILOT-1/4 NPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47NY | | 320 | FITTING, HOSE, PUSHLOK 3/8 X 1/4 FNPT | FITTING, HOSE, PUSHLOK 3/8 X 1/4 FNPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47NB | | 321 | CONNECTOR, MALE, NPT 5/32 PILOT TUBE | CONNECTOR, MALE, NPT FOR 5/32 PILOT TUBE, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47NZ | | 322 | LEGEND, “DOWN”, SHALE SHAKER, KING | LEGEND, “DOWN”, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47QD | | 323 | LEGEND, “UP”, SHALE SHAKER, KING | LEGEND, “UP”, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47QC | | 324 | FITTING, HOSE, PUSHLOK 3/8 X 1/4 MNPT | FITTING, HOSE, PUSHLOK 3/8 X 1/4 MNPT, FOR SHALE SHAKER, MODEL: KING COBRA/VENOM, MAKE: NOV BRANDT, P/N: 47MY | | 325 | STRIP, LONG WEAR, HI TEMP, SHALE SHAKER | STRIP, LONG WEAR, HIGH TEMPERATURE, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: M4A0043896-95-KIT | | 326 | SEAL, REAR, FIXED FRAME, SHALE SHAKER | SEAL, REAR, FIXED FRAME, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: APL/2467 | | 327 | CHANNEL ASSY,FIXED FRAME,LH,SHALE SHAKER | CHANNEL ASSEMBLY, FIXED FRAME, LH, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: APL/2477 | | 328 | CHANNEL ASSY,FIXED FRAME,RH,SHALE SHAKER | CHANNEL ASSEMBLY, FIXED FRAME, RH, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: APL/2478 | | 329 | BOLT, HEX HEAD, M12X45,-A480, AX-1,AXIOM | BOLT, HEX HEAD, M12X45,-A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF12S-2045-A480 | | 330 | NUT, PLAIN, M12,-A480, SHALE SHAKER,AX-1 | NUT, PLAIN, M12,-A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF12S-6000-A480 | | 331 | WASHER, NORDLOCK, M12, A480(PAIR),AX-1 | WASHER, NORDLOCK, M12, A480(PAIR), FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF12S-7200-A480 | | 332 | SCREW, CAP, HEX HEAD, 3/4″ 10UNC X 3″ | SCREW, CAP, HEX HEAD, 3/4″ 10UNC X 3″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22NC | | 333 | SCREW, 3/4″ 10UNC X 2-1/2″, SHALE SHAKER | SCREW, 3/4″ 10UNC X 2-1/2″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22XU | | 334 | WASHER, BEVEL, 3/4″, SHALE SHAKER | WASHER, BEVEL, 3/4″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36AD | | 335 | NUT, HEX. LOCK 3/4″, SHALE SHAKER | NUT, HEX. LOCK 3/4″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 35AV | | 336 | WASHER, FLAT 3/8″, SHALE SHAKER | WASHER, FLAT 3/8″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36BL | | 337 | SCREW, CAP, HEX HEAD, 1/2″ 13UNC X 6″ | SCREW, CAP, HEX HEAD, 1/2″ 13UNC X 6″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22AU | | 338 | SCREW, JACK, WELDMENT, SHALE SHAKER | SCREW, JACK, WELDMENT, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 9856 | | 339 | FITTING, GREASE, SHALE SHAKER, KING | FITTING, GREASE, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 33B | | 340 | WASHER, FLAT, 1/2″, SHALE SHAKER, KING | WASHER, FLAT, 1/2″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36CG | | 341 | WASHER, FLAT, 3/4″, SHALE SHAKER, KING | WASHER, FLAT, 3/4″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 36BK | | 342 | JACK WELDMENT, SHALE SHAKER, KING | JACK WELDMENT, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 9702 | | 343 | SCREW, CAP, HEX HEAD, 1/2″ 13 UNCX1-1/2″ | SCREW, CAP, HEX HEAD, 1/2″ 13 UNC X 1-1/2″, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 22NP | | 344 | NUT, HEX LOCK, 1/2″ 13UNC, SHALE SHAKER | NUT, HEX LOCK, 1/2″ 13UNC, FOR SHALE SHAKER, MODEL: KING CORBRA II, MAKE: NOV/BRANDT, P/N: 35CR | | 345 | GLAND M25,FOR SHALE, VSM | GLAND M25,FOR SHALE SHAKER MODEL: VSM-300, MAKE- NOV BRANDT, PART NO: 300/03/038 | | 346 | BOLT, HEX HEAD, M24X80, SS, SHALE SHAKER | BOLT, HEX HEAD, M24 X 80, SS, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF24S-2080-A480 | | 347 | NUT, PLAIN, M24, A480, SHALE SHAKER,AX-1 | NUT, PLAIN, M24, A480, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF24S-6000-A480 | | 348 | WASHER, NORDLOCK, M24, SS, SHALE SHAKER | WASHER, NORDLOCK, M24, SS, FOR SHALE SHAKER, MODEL: AX-1, MAKE: AXIOM, P/N: MF24S-7200-A480 | | 349 | PLUG, KING COBRA VENOM BACKTANK | PLUG, KING COBRA VENOM BACKTANK, FOR SHALE SHAKER, MODEL: KING COBRA VENOM SHAKER, MAKE: NOV, P/N: 42DO | | 350 | COVER,WEIGHT,SHALE SHAKER,KING COBRA,NOV | COVER, WEIGHT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 517078 | | 351 | GUARD ASSEMBLY, MOTOR CPLNG,SHALE SHAKER | GUARD ASSEMBLY, MOTOR COUPLING, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: 300/01/022 | | 352 | GUARD, MOTOR COUPLING, SHALE SHAKER | GUARD, MOTOR COUPLING, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: 300/01/023 | | 353 | SCREW, HEX HEAD, M16 X 55LG, SHALE SHAKE | SCREW, HEX HEAD, SIZE: M16 X 55LG, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSHHS M16X55 | | 354 | NUT, HEX HEAD, M16, SHALE SHAKER | NUT, HEX HEAD, M16, FOR SHALE SHAKER, MODEL: VSM300, MAKE: BRANDT NOV, P/N: SSPLN M16 | | 355 | GLAND, M20, DOUBLE COMPRESSION EXD/EXE | GLAND, M20, DOUBLE COMPRESSION EXD/EXE, FOR SHALE SHAKER, MODEL, VSM 300, MAKE: NOV, P/N: 300/03/039 | | 356 | WASHER, LOCK, 1″, SHALE SHAKER, MONGOOSE | WASHER, LOCK, 1″, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 05-110 | | 357 | CONNECTOR, WIRE, 1/4″, SHALE SHAKER | CONNECTOR, WIRE, 1/4″, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 6592002 | | 358 | SCREW,CAP,HEX HD,M6X20MM LG,SHALE SHAKER | SCREW, CAP, HEX HD, M6 X 20 MM LG, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 04-1208 | | 359 | NUT, HEX, M6, SHALE SHAKER, MONGOOSE | NUT, HEX, M6, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 03-236 | | 360 | REDUCER, BUSHING, 3/4″ MNPT X 20 MM FNPT | REDUCER, BUSHING, 3/4″ MNPT X 20 MM FNPT, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1880 | | 361 | ELBOW, STREET 90 DEG, 20 MM,SHALE SHAKER | ELBOW, STREET 90 DEG, 20 MM, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1876 | | 362 | TAB, GROUND, SHALE SHAKER, MONGOOSE | TAB, GROUND, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1882 | | 363 | GLAND,CABLE,20 MM 3/4″CABLE,SHALE SHAKER | GLAND, CABLE, 20 MM FOR 3/4″ CABLE, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 01-1875 | | 364 | WASHER,LOCK,M6 REG,SHALE SHAKER,MONGOOSE | WASHER, LOCK, M6 REG, FOR SHALE SHAKER, MODEL: MONGOOSE CDX18-5900, MAKE: MI SWACO, P/N: 05-269 | | 365 | WEAR STRIP, LONG, SHALE SHAKER, NOV | WEAR STRIP, LONG, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: M4A0049134-KIT | | 366 | WEAR STRIP, SIDE PINNED,SHALE SHAKER,NOV | WEAR STRIP, SIDE PINNED, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: M4A0049614-KIT | | 367 | SCREW ASSEMBLY, JACK, SHALE SHAKER, NOV | SCREW ASSEMBLY, JACK, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: 23272 | | 368 | ACCELEROMETER, SHALE SHAKER, NOV | ACCELEROMETER, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0042334 | | 369 | ELBOW, ELECTRICAL, SHALE SHAKER, NOV | ELBOW, ELECTRICAL, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0048358 | | 370 | REDUCER, ELECTRICAL, SHALE SHAKER, NOV | REDUCER, ELECTRICAL, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0054315 | | 371 | GLAND, ELECTRICAL, 500 NPT, SHALE SHAKER | GLAND, ELECTRICAL, 500 NPT, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0053968 | | 372 | CABLE, SIGNAL, SHALE SHAKER, NOV | CABLE, SIGNAL, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0043465 | | 373 | CABLE, POWER, SHALE SHAKER, NOV | CABLE, POWER, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0053967 | | 374 | BODY, 75-1.0 STAUFF DUAL DIN 3,SH/SHAKER | BODY, 75-1.0 STAUFF DUAL DIN 3, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047178 | | 375 | COVER, PLATE STAUFF DIN 3,SHALE SHAKER | COVER, PLATE STAUFF DIN 3,FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047180 | | 376 | BOLT, STAUFF CLAMP DUAL DIN 3,SH/ SHAKER | BOLT, STAUFF CLAMP DUAL DIN 3,FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047181 | | 377 | CLAMP BODY STAUFF SINGLE DIN 3,SH/SHAKER | CLAMP BODY STAUFF SINGLE DIN 3, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047979 | | 378 | CLAMP COVER STAUFF SINGLE DIN, SH/SHAKER | CLAMP COVER STAUFF SINGLE DIN, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047980 | | 379 | CLAMP BOLT STAUFF SINGLE DIN 3,SH/SHAKER | CLAMP BOLT STAUFF SINGLE DIN 3, FOR SHALE SHAKER, MODEL: KING COBRA HYBRID KIT, MAKE: NOV, P/N: P4A0047981 | | 380 | CONTACTOR, REVERSING, SHALE SHAKER | CONTACTOR, REVERSING, 16A, 1 N.O. 1 N.C, FOR SHALE SHAKER, MODEL: MI SWACO, MAKE: ALLEN-BRADLEY / ROCKWELL AUTOMATION, OLD P/N: 104-C16D22-X6, P/N: 104-C16D22 | | 381 | PULLEY,DRIVE-BELT V255 PUMP,SHALE SHAKER | PULLEY, DRIVE-BELT V255 PUMP, FOR SHALE SHAKER, MODEL: FLC504, MAKE: DERRICK SOLUTIONS INTERNATIONAL, P/N: G0014441 | | 382 | COVER, WEIGHT, SHALE SHAKER, KING COBRA | COVER, WEIGHT, FOR SHALE SHAKER, MODEL: BRANDT KING COBRA, MAKE: NOV BRANDT, P/N: 517062 | | 383 | O-RING, SHALE SHAKER, SHALE SHAKER | O-RING, FOR SHALE SHAKER, FOR SHALE SHAKER, MODEL: BRANDT KING COBRA, MAKE: NOV BRANDT, P/N: 508629 | | 384 | KIT, CRITICAL SPARE PARTS, SHALE SHAKER | KIT, RIG CRITICAL SPARE PARTS, 380-415 VOLT, 50HZ, ATEX WEIGHT: 410.000 LBS, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, MAKE: SCHLUMBERGER, P/N: 9350054 | | 385 | GROMMET, RECT NYLON WHITE, SHALE SHAKER | GROMMET, RECT NYLON WHITE, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 07-443 | | 386 | TRANSFORMER, (380 V), SHALE SHAKER | TRANSFORMER, (380 V), FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 7790018 | | 387 | BLOCK, POWER DISTRIBUTION, SHALE SHAKER | BLOCK, POWER DISTRIBUTION, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 7150014 | | 388 | CIRCUIT BREAKER, 380V, SHALE SHAKER | CIRCUIT BREAKER, 380V, SIZE: SO 5.5-8A (SIEMENS 3RV10 21 1HA10) ATEX/IECEX ONLY, FOR SHALE SHAKER, MODEL: MONGOOSE PRO, 380-415 VOLT, 50HZ, ATEX, P/N: 7510024 | | 389 | SHAFT, CLUMP WEIGHT ASSY, SHALE SHAKER | SHAFT, FOR CLUMP WEIGHT ASSY, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/005, P/N: VSM3-01-01-C3 | | 390 | KEY- CLUMP WEIGHT, SHALE SHAKER, VSM300 | KEY- CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: 300/01/006 | | 391 | KEY- MOTOR SHAFT COUPLING, SHALE SHAKER | KEY- MOTOR SHAFT COUPLING, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: 300/01/007 | | 392 | PRIMARY CLUMP WEIGHT,SHALE SHAKER,VSM300 | PRIMARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/009, P/N: VSM3-01-01-C7 | | 393 | SECONDARY CLUMP WEIGHT, SHALE SHAKER | SECONDARY CLUMP WEIGHT, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/010, P/N: VSM3-01-01-C8 | | 394 | END CAP, SHALE SHAKER, VSM300, NOV | END CAP, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: 300/01/003, P/N: VSM3-01-01-C1 | | 395 | HEX HEAD SCREW-M12 X 40 LG, SHALE SHAKER | HEX HEAD SCREW-M12 X 40 LG, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, OLD P/N: SSSKT M12 X 40, P/N: 001-201-1208 | | 396 | MUD GUN, RESERVE TANK, SHALE SHAKER TANK | MUD GUN, RESERVE TANK 1-3, MIXING & SUCTION TANK, SOLIDS CONTROL SYSTEM, FOR SHALE SHAKER TANK, MODEL: GK218.06.02.00, MAKE: HH, P/N: 1200366790 | | 397 | BOLT ASSY, SG MOTOR, SHALE SHAKER | BOLT ASSY, SG MOTOR, ( 3/4-16 L9 HARDWARE), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0001973 | | 398 | MOTOR CORD ASSY(19 FT), SHALE SHAKER | MOTOR CORD ASSY(19 FT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 11881-01-006 | | 399 | MOTOR CORD ASSY(15 FT), SHALE SHAKER | MOTOR CORD ASSY(15 FT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 11881-01-003 | | 400 | JUNCTION BOX, SHALE SHAKER | JUNCTION BOX (EP 3/4 NPT W/4 TERMINAL), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0004586 | | 401 | CLOSE NIPPLE (3/4 NPT), SHALE SHAKER | CLOSE NIPPLE (3/4 NPT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: NPLE-75-COND | | 402 | SEAL OFF (3/4 NPT), SHALE SHAKER | SEAL OFF (3/4 NPT), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: CRH-EYS-216 | | 403 | PANEL ASSY, REPLACEMENT, SHALE SHAKER | PANEL ASSEMBY, REPLACEMENT WIRED STARTER, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 5002215 | | 404 | PLUG, 75 NPT, SHALE SHAKER, DERRICK | PLUG, 75 NPT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: SHPP-75 | | 405 | TENSIONING SIDE FINGER, SHALE SHAKER | TENSIONING SIDE FINGER, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14611-01 | | 406 | ADJUSTING BOLT, TENS SIDE, SHALE SHAKER | ADJUSTING BOLT, FOR TENSIONING SIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005479 | | 407 | ADJUSTING NUT, TENSI SIDE, SHALE SHAKER | ADJUSTING NUT, FOR TENSIONING SIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005428 | | 408 | ORING, 2-3/4 ID X 3/32THICK,SHALE SHAKER | ORING, 2-3/4 ID X 3/32 THICK, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0003319 | | 409 | AWD ASSEMBLY COMPLETE, SHALE SHAKER | AWD ASSEMBLY COMPLETE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15646-01 | | 410 | FINGERS GUIDE, SHALE SHAKER, FLC 503 | FINGERS GUIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14616-01 | | 411 | CAM HOUSING TENSIONING SIDE,SHALE SHAKER | CAM HOUSING TENSIONING SIDE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14617-01 | | 412 | TENSIONING NUT, SHALE SHAKER, FLC 503 | TENSIONING NUT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005480 | | 413 | SPRING, FINGERS RETURN, SHALE SHAKER | SPRING, FINGERS RETURN, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005466 | | 414 | BOLT, 3/8-24X1-1/2″ LONG, SHALE SHAKER | BOLT, 3/8-24 X 1 1/2″ LONG HEX HEAD, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0002401 | | 415 | WASHER, 3/8 FLAT, SHALE SHAKER, FLC 503 | WASHER, 3/8 FLAT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: WFSS-38-SAE | | 416 | NY-LOK, 3/8-24, SHALE SHAKER, FLC 503 | NY-LOK, 3/8-24, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0002402 | | 417 | BOLT, 3/8-24 X 1 1/4″ LONG,SHALE SHAKER | BOLT, 3/8-24 X 1 1/4″ LONG HEX HEAD, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0002400 | | 418 | BLIND RIVET,6.0MM DIA.16 MM,SHALE SHAKER | BLIND RIVET, 6.0 MM DIA. 16.0 MM LONG, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0003787 | | 419 | CLOSE-OFF PLATE, SHALE SHAKER, FLC 503 | CLOSE-OFF PLATE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 14625-01 | | 420 | O-RING, 4 3/8 ID X1/8 THICK,SHALE SHAKER | O-RING, 4 3/8 ID X 1/8 THICK, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: ORVI-ARP-245 | | 421 | ABDJUSTING NUT,EXTRAC TOOL,SHALE SHAKER | ABDJUSTING NUT, EXTRACTION TOOL, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16070-01 | | 422 | LOWER CROSS ASSY, SHALE SHAKER, FLC 503 | LOWER CROSS ASSEMBLY, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15643-03 | | 423 | UPPER CROSS ASSY, SHALE SHAKER, FLC 503 | UPPER CROSS ASSEMBLY, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15643-02 | | 424 | MECHANICAL JACK, SHALE SHAKER, FLC 503 | MECHANICAL JACK, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005849 | | 425 | ELEVATOR BOLT, SHALE SHAKER, FLC 503 | ELEVATOR BOLT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: OTCB-25X100X38 | | 426 | BOLT, (1″-8 X 3 1/2 SS), SHALE SHAKER, F | BOLT, (1″-8 X 3 1/2 SS), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0004582 | | 427 | HANDLE CLIP, SHALE SHAKER, FLC 503 | HANDLE CLIP, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0005177 | | 428 | NUT, (1″ THIN NYLOC), SHALE SHAKER, FLC | NUT, (1″ THIN NYLOC), FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: G0004581 | | 429 | UPRIGHT SHAFT, SHALE SHAKER, FLC 503 | UPRIGHT SHAFT, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 15643-05 | | 430 | HANDLE CLIP MOUNTING HANDLE,SHALE SHAKER | HANDLE CLIP MOUNTING HANDLE, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16001-00 | | 431 | UPRIGHT SHAFT TO UPPER CROSS ASSY,SHAKER | UPRIGHT SHAFT TO UPPER CROSS ASSY, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16538-17 GROUND WIRE 9″ | | 432 | LOWER CROSS ASSY TO UPPER/HOPPER, SHAKER | LOWER CROSS ASSY TO UPPER/HOPPER, FOR SHALE SHAKER, MODEL: FLC 503, MAKE: DERRICK, P/N: 16538-27 GROUND WIRE 26″ | | 433 | MOTOR COUPLING GUARD ASSY, SHALE SHAKER | MOTOR COUPLING GUARD ASSEMBLY, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: VSM3-01-03-C1 | | 434 | SOCKET HEADED CAP SCREW, SHALE SHAKER | SOCKET HEADED CAP SCREW M12X16 LG SS 316, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: SSSKTM12X16 | | 435 | WASHER WEDGELCK M12, FOR SHALE SHAKER | WASHER WEDGELCK M12 SS 316, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: 001-09B-112 | | 436 | BEARING, SHALE SHAKER,NJ306ECP/C4VQ015 | BEARING, MONGOOSE, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: SKF, P/N: NJ306ECP/C4VQ015 | | 437 | WEIGHT COVER, SHALE SHAKER, 306170 | WEIGHT COVER, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 306170 | | 438 | TERMINAL BOX COVER, SHALE SHAKER, 309040 | TERMINAL BOX COVER, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 309040 | | 439 | SCREW HEX HD PLT, SHALE SHAKER,103057229 | SCREW HEX HD PLT M16.5X100MM LONG, GRADE:10.9, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 103057229 | | 440 | NUT HEX PLT, SHALE SHAKER, 103057259 | NUT HEX PLT M16.5, GRADE: 10.9, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 103057259 | | 441 | WASHER FLAT, SHALE SHAKER, 1345123-MI | WASHER FLAT BLACK F436 11/16 IDX1-3/16 ODX.108 IN THICK, FOR SHALE SHAKER, MODEL: CDX18-2150, MAKE: MI SWACO, P/N: 1345123-MI | | 442 | AWD ASSY, FLC-504, DERRICK | AWD ASSEMBLY, FOR SHALE SHAKER, MODEL: FLC 504, MAKE: DERRICK, P/N: 1609-01 | | 443 | BOLT HHCS 1/2″ 13 UNC X 8 1/2″,SHAKER | BOLT HHCS 1/2″ 13 UNC X 8 1/2″, FOR SHALE SHAKER, MODEL: KING COBRA – M4A0046232, MAKE: NOV, P/N: 22AGI | | 444 | SHIPPING BRACKET SPACER,SHALESHAKER,20AZ | SHIPPING BRACKET SPACER, FOR SHALE SHAKER, MODEL: KING COBRA – M4A0046232, MAKE: NOV, P/N: 20AZ | | 445 | ABB AF16-30-10-14 ,CONTACTOR,SHALESHAKER | ABB AF16-30-10-14 , 250-500V50/60HZ-DC CONTACTOR, FOR NOV SHALE SHAKER, MAKE: KING KOBRA, NOV P/N: 21F0008, P/N: 24QM | | 446 | MECHANICAL JACK, SHALE SHAKER, G0005848 | MECHANICAL JACK, FOR SHALE SHAKER, MODEL: FLC-504, MAKE: DERRICK, P/N: G0005848 | | 447 | ASSY COMPLETE, JACKING, SHALE SHAKER | ASSEMBLEY COMPLETE, JACKING, FOR SHALE SHAKER, MODEL: FLC-504, MAKE: DERRICK, P/N: 16091-01 | | 448 | ABB OVERLOAD EF19-6.3, SHALE SHAKER | ABB OVERLOAD EF19-6.3, RATING 1.9 : 6.3 AMP, FOR SHALE SHAKER, MODEL: KING KOBRA, MAKE: NOV, OLD P/N: EF19-6.3, P/N: 18664090-001 | | 449 | VIBRATORY MOTOR,VMX 18-10900,SHALESHAKER | VIBRATORY MOTOR, MODEL : VMX 18 – 10900, FRAME:80, HP: 3.5, FOR SHALE SHAKER, MODEL: KING COBRA II, MAKE: BRANDT, P/N: 1DBX | | 450 | MOTOR BRANDT, 220-240/440-480V, SHAKER | MOTOR BRANDT, 220-240/440-480V FRAME SIZE: 80, HP: 3.5, WATTS:2611, 3-PHASE, 60HZ, RPM:1800, BRANDT, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV, P/N: 1DBX | | 451 | STARTER ASSY, SHALE SHAKER,10441 | STARTER ASSY,460 V 60 HZ 2.9-4 FLA, FOR SHALE SHAKER, MODEL: KING COBRA, MAKE: NOV BRANDT, P/N: 10441 | | 452 | ROTARY SWITCH HANDLE, SHALE SHAKER | ROTARY SWITCH HANDLE, FOR SHALE SHAKER, MODEL: VSM300, MAKE: NOV, P/N: PX99900540 | | 453 | CONTACTOR, A-B, 460V,SHALE SHAKER, 24QM | CONTACTOR, A-B, 460V, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24QM | | 454 | BIMETALIC OVERLOAD, A-B IEC,SHALE SHAKER | BIMETALIC OVERLOAD (OLD), A-B IEC, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NU | | 455 | BIMETALIC OVERLOAD, SHALE SHAKER, 24NV | BIMETALIC OVERLOAD, A-B IEC, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NV | | 456 | ADAPTERS (OLD), SHALE SHAKER, 24NT | ADAPTERS (OLD), A-B OVERLOAD MOUNTING, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NT | | 457 | ADAPTERS, SHALE SHAKER, 24NY | ADAPTERS, A-B OVERLOAD MOUNTING, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NY | | 458 | START INTERLOCK, A-B,SHALE SHAKER, 24QH | START INTERLOCK, A-B, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24QH | | 459 | SHIELD, TAMPER,SHALE SHAKER, 24NS | SHIELD, TAMPER, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24NS | | 460 | PURCHASED IN A KIT,SHALE SHAKER, 24MQ | PURCHASED IN A KIT, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 24MQ | | 461 | VIBRATOR MOTOR, TYPE VMX18-8300 | VIBRATOR MOTOR, TYPE VMX18-8300.MANUFACTURED BY ITALVIBRAS, FRAME SIZE 70,HP 2.5,WATT 1865,VOLTS 220-240/440-480,AMP 7.0/3.5,PH 3, FREQ 60 HZ,RPM 1800,MOTOR HAVING 06 NO’S OF FOUNDATION BOLTS, FOR SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: NOV, P/N: 01-2054 | | 462 | CONTACTOR, SHALE SHAKER, AF26-30-00-14 | CONTACTOR, 03, POLE, AF26, 250-500V50/60HZ-DC, COIL VOLTAGE 480VAC, 50/60HZ, FOR NOV SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: ABB, P/N: AF26-30-00-14 | | 463 | KIT, SINGLE MOUNTING,SHALE SHAKER,DB19EF | KIT, SINGLE MOUNTING, DB19, FOR NOV SHALE SHAKER, MODEL: KING COBRA BRANDT, MAKE: ABB, P/N: DB19EF | | 464 | SCREEN PLUGVSM-300, MAKE – BRANDT | SCREEN PLUG FOR SHALE SHAKER SCREEN, MODEL VSM – 300, MAKE – BRANDT, OLD P/N: AWC-2, P/N: MISC-AWC2 | | 465 | END CAP, SHALE SHAKER SCREEN, 300/01/003 | END CAP, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/003 | | 466 | SEAL HOUSING, SHALE SHAKER, 300/01/004 | SEAL HOUSING, FOR SHALE SHAKER SCREEN, MODEL: VSM300, MAKE: NOV, P/N: 300/01/004 | | 467 | TOP SCREEN PNEUMOSEAL, VSM-300, NOV | TOP SCREEN PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM-300, MAKE NOV BRANDT, P/N: 300/2/008 | | 468 | TOP SCREEN PNEUMOSEAL, VSM 300, NOV | TOP SCREEN PNEUMOSEAL FOR SHALE SHAKER, MODEL VSM 300, MAKE : BRANDT, P/N: 300/02/008 |
|
|
Telephone
E-MAIL