|
SERVA PTE600 Pump Parts list
| 1 | OIL BREATHER P/N P60-11-009 MUD PUMP, POWER END,CASE ASSY TPE600, MAKE-SERVA (AOS REF FOR, P66-11-000, HW UNITS) |
| EA | 6 | | 2 | GASKET,REAR COVER P/N P60-11-033 MUD PUMP, POWER END,CASE ASSY TPE600, MAKE-SERVA (AOS REF FOR, P66-11-000, HW UNITS) |
| EA | 6 | | 3 | GASKET,TOP/BOTTOM COVER P/N P60-11-034 MUD PUMP, POWER END,CASE ASSY TPE600, MAKE-SERVA (AOS REF FOR, P66-11-000, HW UNITS) |
| EA | 10 | | 4 | BEARING,MAIN,OUTSIDE,FIXED,HEAVY-DUTY P/N P60-12-014 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 4 | | 5 | BEARING RACE RETAINER – OUTER P/N P60-12-027 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 10 | | 6 | SHIM,BEARING RACE RETAINER – OUTER P/N P60-12-006 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 42 | | 7 | BEARING,MAIN,INSIDE FIXED, HEAVY-DUTY P/N P60-12-025 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 3 | | 8 | BEARING,MAIN,OUTSIDE FIXED, HEAVY-DUTY P/N P60-12-026 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 3 | | 9 | HHCS,.375-16UNCX0.88″ LG -DRILLED P/N P60-12-013 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 36 | | 10 | BEARING RACE RETAINER – INNER P/N P60-12-028 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 12 | | 11 | SHIM,BEARING RACE RETAINER – INNER,0.04″ THICK P/N P60-12-016 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 12 | | 12 | SHIM,BEARING RACE RETAINER – INNER,0.02″ THICK P/N P60-12-017 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 12 | | 13 | SHIM,BEARING RACE RETAINER – INNER P/N P60-12-015 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 4 | | 14 | BUSHING,MAGNETIC,SEAL INSULATOR & COUNTER DRIVE P/N P15-03-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 6 | | 15 | RING,SEAL P/N P15-04-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 6 | | 16 | SEAL,MAGNETIC,SHAFT,MSC,65152 REV B P/N P15-05-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 6 | | 17 | RING,RETAINING P/N P15-08-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 6 | | 18 | OUTSIDE BEARING HOUSING GASKET P/N P60-12-005 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 8 | | 19 | OUTSIDE BEARING HOUSING GASKET 2.0MM P/N P61-12-005 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 8 | | 20 | OUTSIDE BEARING HOUSING P/N P61-12-002 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 1 | | 21 | STUD, 7/8″X9NCX3″LG, GR B7 P/N P60-12-010 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 32 | | 22 | WASHER, LOCK, NORD-LOCK, 7/8″(NL22SP) P/N X20-28-541 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 32 | | 23 | NUT,HEX,7/8″-9UNC P/N X20-22-909 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 32 | | 24 | GASKET,INJUCTOR,CRANKSHAFT,OIL W/#20 ADAPTER P/N P15-09-031 MUD PUMP, CRANKSHAFT ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-12-001, HW UNITS) |
| EA | 8 | | 25 | CROSSHEAD GUIDE P/N P61-13-003 CROSSHEAD CONNECTING ROD ASSY, POWER-END, TPE600, MAKE-SERVA (AOS REF FOR, P66-13-000, HW UNITS) |
| EA | 12 | | 26 | BEARING,CONNECTING ROD,5.25″IDX5.595″OD,4″WIDE P/N P60-13-031 CROSSHEAD CONNECTING ROD ASSY, POWER-END, TPE600, MAKE-SERVA (AOS REF FOR, P66-13-000,HW UNITS) |
| EA | 6 | | 27 | HHCS,1″-14UNFX2″LG P/N X20-08-142 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 6 | | 28 | WASHER,LOCK,1″ P/N X20-28-522 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 6 | | 29 | RET. WASHER P/N P60-14-016 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 6 | | 30 | FLANGE, P/N P60-14-015 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 4 | | 31 | SPACER P/N P60-14-019 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 4 | | 32 | RETAINER P/N P60-14-013 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 4 | | 33 | O-RING, P/N 000P569255 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 8 | | 34 | SHIM SET-8″ P/N P60-14-014 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 4 | | 35 | SHIM SET-12″,0.7MM THICK P/N P60-14-011 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 6 | | 36 | SHIM SET-12″,0.2MM THICK P/N P60-14-012 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 6 | | 37 | COVER GASKET P/N P60-14-002 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 8 | | 38 | BEARING,SMALL,ASSY P/N P60-14-100 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 8 | | 39 | BULL GEAR BEARING ASSY P/N P60-14-400 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
|
| 8 | | 40 | PINION P/N P60-14-020 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 1 | | 41 | BULL GEAR P/N P60-14-005 P60-14-007 MUD PUMP, GEAR REDUCER ASSY TPE600, MAKE-SERVA (AOS REF FOR, P61-14-000, HW UNITS) |
| EA | 1 | | 42 | VANE PUMP MODEL : V20F1P11P38C8F22 R, MAKE : FLUIDYNE FLUID POWER, OR GENUINE METARIS (AOS REF: LUBE OIL PUMP FOR MUD PUMP POWER END LUBRICATION, HWD HOISTS) |
| EA | 5 | | 43 | CRANK SHAFT (WITH OIL HOLE) P/N : P60-12-014, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 1 | | 44 | O-RING (CRANK SHAFT ASSY), P/N 000N569120, FOR MUD PUMP TPD600, MAKE-SERVA (AOS REF: FOR HW UNITS) |
| EA | 4 | | 45 | O-RING (CRANK SHAFT ASSY), P/N 000N569126, FOR MUD PUMP TPD600, MAKE-SERVA (AOS REF: FOR HW UNITS) |
| EA | 4 | | 46 | CONNECTING ROD ASSY, P/N : P60-13-100, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 3 | | 47 | CROSSHEAD WRIST PIN – SHORT, P/N : P60-13-004, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 3 | | 48 | RETAINER, RING, GB/T 893 90ID, P/N : X22-01-026, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 8 | | 49 | HHCS, 0.625 -11 UNC x 4″LG , P/N : P60-13-011, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 18 | | 50 | CROSSHEAD, P/N : P64-13-004, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 3 | | 51 | PLUG, SOCKET PIPE, 1″- 11-1/2 TPI, P/N : P60-13-017 , FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 6 | | 52 | THRUST WASHER, P/N : P60-13-018, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 6 | | 53 | FHSCS, 0.250″- 20 UNC x 0.50″ LONG, P/N : X20-07-513, FOR MUD PUMP, TPD600, MAKE-SERVA (AOS REF FOR HW UNITS) |
| EA | 6 |
|
|
Telephone
E-MAIL