Home >> Inventory >>China Warehouse >> Rig maintenance parts list
Details

Rig maintenance parts list








HT-400, Plunger Size 4.0″
NOPART DESCRIPTIONPART NUMBERHAL-PART NOQTYUnit price Remarks
1Retainer, Stop and Spring, HT400, No. 3 Suction Valve, Mach. Cast.100058419316.229776

2Boot, Suction and Stop, HT400TM, No. 3, 4 and 5 Frac100002972316.2523312

3Spring, Lock, Suction Stop, No. 3, HT400100002841316.21256

4Pin, Cotter, 1/8 x 1 1/2 inch, HT-400TM10000207970.3571712

5Liner, Two Piece Bushing, Valve Guide, HT400, No. 4 Frac, Brass100002868316.2200512

6Insert, Two Piece Bushing, Valve Guide, Special, HT-400TM, No 4 Frac100002867316.2200412

7Spring, Valve, HT400, No. 4 inch100002837316.210812

8Valve, HT400,4 inch, Frac100002824316.2100712

9Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown)100002823316.2100612

10Seat Valve, HT400, No. 3 Frac, Tapered100002825316.2100812

11O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-2401000009688.3403712

12Retainer, Guide Bushing, HT400, 4 inch Tapered Seat Bore100002838316.2109612

13Retainer, Cover, HT-400TM, 4.0 in100007820316.22026

14Cover, Discharge, Double Guided Valve, HT-400TM, 4 in100002938316.230916

15Gasket, Discharge Valve & Cylinder Head Cover, No. 4, HT-400TM100002878316.220526

16Ring, Spacer, Discharge Valve & Cylinder Head Cover, No. 4, HT-400TM100002877316.220516

17Liner, Two Piece Bushing, Valve Guide, HT400, No. 4 Frac, Brass100002868316.2200512

18Insert, Two piece Bushing, Valve Guide, Special, HT-400TM, No. 4 Frac100002867316.2200412

19Spring, Valve, HT400, No. 4 Inch100002837316.21086

20Valve, HT400, 4.0 In, Frac100002824316.210076

21Insert, Valve, HT400, No. 3 Frac, Urethane, Standard Service (Brown)100002823316.210066

22Seat Valve, HT400, No. 3 Frac, Tapered100002825316.210086

23O-ring, 90 Duro, 4 x 3 3/4 x 1/8, 568-2401000009688.340376

24Retainer, Guide Bushing, HT400, 4.0 Inch, Tapered Seat Bore100002838316.210966

25Pin Groove, 1/2-in x 11/4-in, Type 5100002081–6

26Sleeve, Wiper Gland, HCLE, 4.0 inch100002016–6

27Nut, Packing Adjustment, HCLE, 4.0 inch101328001–6

28Seal, Packing Lube, 4.000, WS-Seal, CDI101377657–6

29O-ring, 9- Duro, 5 x 4 3/4 x 1/8 568-248100002016–6

30Carrier, Seal, 4.000, CDI101377656–6

31Adaptor, Female, 4.000, PEEK, CDI101377652–6

32Packing, 4.000, CDI, WSP1, PTFE101377641–6

33Header Ring, 4.000, HNBR, CDI101377640–6

34Spacer, Fluid End, CDI101377638–6

35Retainer, Protective Cylinder Head Cover, 4.0 in100011711316.226066

36Cover, Protective Cylinder Head, 4.0 in100002902316.226056

37Gasket, 3 Discharge Valve & Cylinder Head Cover, 3 3/8 in100002830316.2105212

38Ring, Spacer, #3 Discharge Valve & Cylinder Head Cover. 3 3/8100002829316.2105112

39Nose, Plunger, HT-400TM, 4.0 in100002885316.22316

40Seal, Plunge Nose Assembly, HT-400TM, 4.0100002884316.2236

41Plunger, 4.0 in, Hard Surface, L-Spacer, HT-400TM100002883316.222946

42Tie Rod, Plunger, HT-400TM, 4.0 in100002827316.219286

43Adaptor, Pushrod, HT-400TM, 4.0 in, Two Piece Nose100011706316.223026

44VALVE, CHECK, 1/8, FEMALE INLET, MALE OUTLET, WITH 70 DURO O-RING1000005921.1316

45FILTER,HYDRAULIC, OIL, ELEMENT, 25 MICRON10000169870.2083124

46ELEMENT, OIL FILTER, 0.027 DIA PERFORATIONS, WITH MAGNETS, FOR LF-SKB-G267-3 STRAINER10000169670.2081324

HALLIBURTON C-PUMP 4 X 4 X 12 MIX WATER.
47IMPELLER, 12 INCH DIAMETER, HALLIBURTON 4 X 4 X 12 CENTRFUGAL PUMP100003127350.205011

48SLEEVE, SHAFT, METCO 136F, PUMP, CENTRIFUGAL, HALLIBURTON100003087350.124353

49O-RING, 70 DURO, 2 1/8 X 2 X 1/16 568-033, SPEC 70.33000 SPEC, 70.7200010000240070.806096

50O-RING, 70 DURO, 12 1/2 X 12 X 1/4 568-453, SPEC 70.33000 SPEC, 70.7200010000199370.340196

51O-RING, 70 DURO, 2 X 1 7/8 X 1/16 568-032, SPEC 70.33000 SPEC, 70.7200010000239970.806086

52SEAL, OIL, 21159, 2.125 B X 3.000 OD X 0.250 W, CHROME ONLY10001314070.806034

53SEAL, OIL, 21163, 2.125 B X 3.000 OD X 0.375 W, CHROME OR 472015 NATIONAL ONLY10000239670.806044

54SEAL, OIL, 9189 LPD, 1.875 B X 2.750 OD X 0.375W, JOHNS MANVILLE ONLY10000239770.806064

55GASKET, 4 IN NOM, 125 STANDARD FLANGE 1/16 NEOPRENE FULL FACE, 3-M DEMING PUMP100011821350.166753

56SCREW, SET, 3/4-10 UNC-3A X 2, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLOKROME ONLY, SPEC10001314370.806146

57SCREW, SET, 3/4-10 UNC-3A X 3, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLLOKROME ONLY, SPEC10001314270.806136

58SEAL, OIL, 2.500 B X 3.500 OD X 0.437 W10000239870.8060715

59BEARING, BALL, RADIAL, 2.165 ID X 5.512 OD X 1.299 THK, SINGLE ROW, HEAVY SERIES,SIMPLEX, 41110000239570.806021

60BEARING, BALL, 1/2 PAIR, 2.165 ID X 4.724 OD X 1.141 THK, SINGLE ROW, MEDIUM SERIES, DUPLEX, PART NO 731110000144270.041362

HALLIBURTON C-PUMP 6 X 5 X 11 SLURRY .
61IMPELLER, 10 DIA, PUMP CENTRIFUGAL, 6 X 5 X 10 X 10, HALLIBURTON100003083350.124142

62SLEEVE, SHAFT, METCO 136F, PUMP, CENTRIFUGAL, HALLIBURTON100003087350.124353

63O-RING, 70 DURO, 2 1/8 X 2 X 1/16 568-033, SPEC 70.33000 SPEC, 70.7200010000240070.806096

64O-RING, 70 DURO, 12 1/2 X 12 X 1/4 568-453, SPEC 70.33000 SPEC, 70.7200010000199370.340196

65O-RING, 70 DURO, 2 X 1 7/8 X 1/16 568-032, SPEC 70.33000 SPEC, 70.7200010000239970.806086

66SEAL, OIL, 21159, 2.125 B X 3.000 OD X 0.250 W, CHROME ONLY10001314070.806034

67SEAL, OIL, 21163, 2.125 B X 3.000 OD X 0.375 W, CHROME OR 472015 NATIONAL ONLY10000239670.806044

68SEAL, OIL, 9189 LPD, 1.875 B X 2.750 OD X 0.375W, JOHNS MANVILLE ONLY10000239770.806064

69GASKET, 6 IN NOM, 125 STANDARD FLANGE -1/16 NEOPRENE FULL FACE, 3-M DEMING PUMP100008200350.166776

70GASKET, 5 IN NOM, 125 STANDARD FLANGE -1/16 NEOPRENE FULL FACE, 3-M DEMING PUMP100011822350.166766

71SCREW, SET, 3/4-10 UNC-3A X 2, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLOKROME ONLY, SPEC10001314370.806146

72SCREW, SET, 3/4-10 UNC-3A X 3, CUP PORT, HEX SOCKET, HEAT TREATED ALLOY STEEL, ZINC PLATED, 40 RC MAX, HOLLOKROME ONLY, SPEC10001314270.806136

73SEAL, OIL, 2.500 B X 3.500 OD X 0.437 W10000239870.8060715

74BEARING, BALL, RADIAL, 2.165 ID X 5.512 OD X 1.299 THK, SINGLE ROW, HEAVY SERIES,SIMPLEX, 41110000239570.806021

75BEARING, BALL, 1/2 PAIR, 2.165 ID X 4.724 OD X 1.141 THK, SINGLE ROW, MEDIUM SERIES, DUPLEX, PART NO 731110000144270.041362

PARTS FOR WOODS COUPLING – HALLIBURTON CENTRIFUGAL PUMP
76SLEEVE, COUPLING, WOODS 8H, HYTREL10000239570.806022

77RING, RETAINING, N5000-112, INTERNAL10000239570.806021

GM8V71 – ALLISON HT-750 TRANSMISSION
78FILTER,HYDRAULIC, OIL, ELEMENT, 25 MICRON10000169870.208314

79SEAL, SHAFT SHIFTER, FOR ALLISON TRANSMISSION HT-750100046390102.294202

80SEAL, 6773311, OIL OUTPUT SHAFT, ALLISON TRANS 4460100047441130.041452

81KIT, GASKET100048276195.229182

82NUT, OUTPUT FLANGE, SELF-LOCKING, HT-750 DRD100048288195.229622

83O-RING, 70 DURO, 4 7/8 X 4 1/2 X 3/16 568-349, SPEC 70.33000 SPEC, 70.7200010000189170.334324

84ACCUMULATOR, HYDRAULIC, 15 CUBIC INCH, NOMINAL VOLUME, PRECHARGED TO 20 PSI, SPEC10002044870.001362

85O-RING, PICKUP TUBE, GM100046372102.284082

86SCREEN ASSEMBLY, FILTER, HT750 DRD, FOR 7 IN DEEP OIL PAN, AFTER SERIAL NUMBER25100-35716, INCLUDES SCREEN, SPACER, O-RING SEAL, AND PAN GASKET100048295195.230011

87FILTER,ENGINE, FUEL, SECONDARY, SPIN ON, DDC 6-71 -6V & 8V-71 & 6V & 8V-92 ENGINES10000171170.217936

88FILTER,ENGINE, FUEL, PRIMARY, SPIN ON, 6V AND 8V AND 92 SERIES DETROIT DIESEL, 6-71, 4-71, 8.210000171270.2180112

89FILTER, ENGINE, FUEL, SPIN ON, SECONDARY,FOR GM 3,4-53, DET 3-53, 4-71,6-71100002641102.258763

90FILTER,ENGINE, FUEL, SPIN ON, PRIMARY, FOR GM 3,4-53, DET 6-71, DET 3-53, 4-71100002640102.258756

91BELT, V, 31/64 IN W, 67 3/8 IN LG, 36 DEG, MATCHED SET OF 310002161170.072994

92PICKUP, MAGNETIC, INTRINSICALLY SAFE, POWER OUTPUT, 5/8-18-21 UN, 2.5 IN THREAD LG, USED WITH MTH-103D TACHOMETER/HOURMETER10000932770.146026

93RECEIVER, HYDRAULIC THROTTLE CONTROL, MODEL 52, COLUMBIAN10000165870.178126

94GAUGE, WATER TEMPERATURE, 100-250 DEGREE F, ENGINE, 288 INCH CAPILLARY TUBE, SPEC, MURPHY DRAWING 10-35-012510000175270.241816

95GAUGE, OIL PRESSURE, 0-100 PSI, GENERAL MOTORS ENGINE, SPEC, MURPHY DRAWING 05-35-009410000175870.242446

96GAUGE, OIL PRESSURE, 0-300 PSI, SPEC, MURPHY DRAWING 05-35-041510000174170.240284

97GAUGE, OIL TEMPERATURE, 150-300 DEGREE F, 336 INCH TUBE, SPEC, MURPHY DRAWING 10-35-070810001308970.714084

98TACHOMETER, DIGITAL, 4 DIGIT, LCD, INTRINSICALLY SAFE, 3.375 DIAMETER HOLE, MAGNETIC PICKUP ENERGIZED CSA, LR45322-910003270770.793703

99Service Kit, Air Starter IR 150LFPE88R54-020100049770
1

DETROIT 4-71 ENGINE (Auxilary)
100CAP, OIL FILLER10002246670.127072

101FILTER,ENGINE, AIR, PRECLEANER AND PANEL FILTER ASSEMBLY<br>FOR FA-240-PLHD FILTER ASSEMBLY (70.22544 OR 70.22548 ASSEMBLIES)10000169270.207441

102FILTER, ENGINE, AIR, ELEMENT, PRECLEANER, SECONDARY, GENERAL EQUIPMENT10000169470.207993

103ELEMENT, WATER FILTER, DCA 4 WATER SERVICE, SPIN ON, 4 DCA UNITS10000170470.210142

104FILTER,ENGINE, FUEL, SECONDARY, SPIN ON, DDC 6-71 -6V & 8V-71 & 6V & 8V-92 ENGINES10000171170.217934

105FILTER,ENGINE, FUEL, PRIMARY, SPIN ON, 6V AND 8V AND 92 SERIES DETROIT DIESEL, 6-71, 4-71, 8.210000171270.218014

106THERMOSTAT, 170 DEG OPEN, GM100046210102.258042

107PUMP, WATER, 8V-71, GM100046212102.258061

108FILTER, ENGINE, OIL, SPIN ON, DETROIT DIESEL 2 CYCLE ENGINES100011062102.258744

109PUMP, 5199560, FUEL, GM 8V-71100046292102.274871

110GASKET, 5104081, ROCKER COVER, 71 & 92 SERIES, GM100046235102.259032

111GAUGE, WATER TEMPERATURE, 100-250 DEGREE F, ENGINE, 144 INCH CAPILLARY TUBE, SPEC, MURPHY DRAWING 10-35-015410000175370.241891

112HOSE, WATER, 1 IN ID, SGL BRAID 19-B100060141426.60031

113BELT, V, 31/64 IN W, 41-3/8 IN LG, 36 DEG10002720370.357104

114FILTER, ENGINE, OIL, SPIN ON, DETROIT DIESEL 2 CYCLE ENGINES100011062102.258744

115Service Kit, Air starter Ingersol Rand 5BM100049768
1

80 CF STEADY FLOW (Surge Tank)
116REGULATOR, AIR, 1 IN HPT, 0-30 PSI, PILOT OPERATED, NORGREN, WITH BRACKET,18-001-073, WITH O GAUGE10003526570.934121

117GAUGE, PRESSURE, 0-60 PSI, 0-400 KPA, 3 1/2 OR 4 IN, 2%, BRDN TB/BRONZE, 1/4 NPT LM, STEM MOUNT, GLY FILLED, BACK CASE RELIEF100003355441.31321

118GAUGE, AIR PRESSURE, 0-50 PSI, SPEC, MURPHY DRAWING 05-35-071410000174670.240581

119WASHER, RUBBER, 3.00 OD X 1.34 ID X 0.5 THK, AERATION CARTRIDGE, SPEC SPEC, 70.72000100079033940.040696

120CARTRIDGE, AERATION, 60 DEG CONE, 1/4 CIRCLE, 19.5 WIDE, EXTERNAL NIPPLE100078930940.032906

121VALVE, HORIZONTAL CHECK, 1 IN, BRONZE 150, WATER, OIL OR GAS, SPECIAL 70.719721000009226.3041

122VALVE, CHECK, 1 IN, FPT, 3000 PSI1000153366.77651

123VALVE, BALL, 1 INCH, 1500 CWP, FNPT, BRASS BODY, STAINLESS STEEL TRIM, REINFORCED TFE SEAT & STEM SEAL, VITON BODY SEAL, REG. PART, 3 PIECE SWING OUT BODY, SPEC1000009236.44041

124VALVE, WORCESTOR, 2 IN, WITH ADAPTER TO PIPE EXTENSION1000155579.401541

125VALVE, RELIEF, SET AT 44 PSI, SIDE FEMALE OUTLET, MALE INLET, 2 X 2, BRONZE BODY & TRIM, WITH LEVER1000140889.409181

126VALVE, CHECK, 1 IN FPT1000009266.99061

127VALVE, BUTTERFLY, 10 IN, D D H NAO-12-RED RUBBER SEAT-DI DISC-DI BODY, 410 STAINLESS STEEL 7/8 IN, SQUARE STEM-50# WP, DRY SERVICE, BA100 0120 D D H NAO10001622713.205961

128HANDLE, OPERATING, 8 & 10 IN BUTTERFLY VALVE, SPECIAL10001621713.203711

129SPRING, AIR, RUBBER, 6.0 OD MAXIMUM, 1/4 NPT, FIRESTONE, MODEL 1610003349870.831053

130SEAL, RUBBER, RELIEF VALVE, STEADY FLOW SEPARATOR, 6 IN VENT, SPEC, SPEC, 70.7200010000238870.793753

131GLASS, SIGHT, STEADY FLOW BIN100078436935.495389

132LENS, SIGHT GLASS, STEADY FLOW SEPARATOR100078439935.495439

133O-RING – 90D – 4-7/8 X 4-5/8 X 1/8 –
568-247 – SPEC 8.33001   SPEC –       70.72000		1000009738.340445

134O-RING, 90 DURO, 5 X 4 3/4 X 1/8, 568-248, SPEC 8.33001 SPEC, 70.720001000009748.340455

HIGH PRESSURE MANIFOLD SPARES
135VALVE, PLUG, LO-TORC, 1.75 BORE, 15000 PSI WP, 22500 PSI TEST, WITH 2 IN, MALE & FEMALE 1502 UNION ENDS1000010149.1263

136RING, SEAL, WITH BACK-UP RING, 2 IN 1502 UNION10000127638.0947225

137KIT, REPAIR, 1 IN TYPE CERT LO-TORC PLUG VALVE, STANDARD SERVICE, CORROSION RESISTANT ALLOY PLUG, IRON INSERTS, NITRILE SEALS1000155299.127946

138KIT, REPAIR, 2 IN, STANDARD SERV, TYPE CERTIFIED, LO TORC PLUG VALVE, CORROSION RESISTANT ALLOY PLUG, IRON INSERTS, NITRILE SEALS1000157089.826046

139SEAL, UNION, 2 IN FIGURE 602 & 150210000127438.094725

STARTER MOTOR 150 BM IR & COLOMBIAN THROTTLE PARTS.
140TUNE UP KIT REPAIRFOR 150 BM
3

141REAR END PLATE10 BM-12
2

142FRONT END PLATE10 BM-11
2

143COLUMBIAN THROTTLE REP KIT TRANSMITTERMODEL-52
1

144COLUMBIAN THROTTLE REP KIT RECEIVERMODEL-52
1

RCM III
145MIXER ASSEMBLY, CEMENT, LOW PROFILE100011885412.137002

146INSERT, MIXER, LOW PROFILE, 4.5 IN ID, DEVLON, 7.5 INCHES LONG100011886412.137032

147VALVE, BALL, 2 IN, STAINLESS STEEL BODY & STEM, PTFE SEAT, LEVER HANDLE10001306170.590142

148VALVE ASSEMBLY, CEMENT THROTTLING, LOW PROFILE100011884412.136002

149RING, WEAR, FOR 6 IN DIA ROD, 1/2 IN WIDE, 0.120/0.125 THK, REINFORCED NYLON10001326070.992624

150O-RING, 90 DURO, 5 7/8 X 5 5/8 X 1/8 568-255, SPEC 599.33001 SPEC, 70.7200010001295470.3405210

LOW PRESSURE BUTTERFLY VALVE. (FMC/WECO) & AIR ACTUATOR FOR 4″,5″ & 6″.
151Actuator 2″ TO 5″ WECOP526829
4

152Actuator 6″ WECOP526832
2

153Repair Kit, Actuator 2″ TO 5″ WECO

10

154VANE O-RING FOR 4″3260273
20

155B/F Valve 3″323005211.75064

156B/F Valve 4″322988612.50824

157B/F Valve 5″322988713.13184

158B/F Valve 6″322988813.19192

159SEAT, BUTTERFLY, V-3 IN, BNO-12N-NITRILE, SUPERSEDES 10.03466, BP030 012N, SEAT NIT10000109510.034656

160DISC, BUTTERFLY, V-3 IN, D, 12-DUCTILE IRON SUPERSEDES 10.03472, BP030 0120, DISC DI10000110111.034616

161O-RING, 70 DURO, 3/4 X 9/16 X 3/32, 568-113, SPEC 70.33000 SPEC, 70.7200010000191670.3381712

162PIN, ROLL, 79-040-187-1500, 3/16 X 1 1/2, STAINLESS STEEL10000256670.921426

163SEAT, BUTTERFLY, V-4 IN, BNO-12-NITRILE, SUPERSEDES 12.50702, BP040 0120, SEAT BUNA-N10000114612.5069512

164DISC, BUTTERFLY, V-4 IN, D, 12-DUCTILE, IRON SUPERSEDES 12.50728, BP040 0120, DISC DI10000114712.507216

165O-RING, 70 DURO, 3/4 X 9/16 X 3/32, 568-113, SPEC 70.33000 SPEC, 70.7200010000191670.3381712

166PIN, ROLL, 79-040-187-1750, 3/16 X 1 3/4, STAINLESS STEEL10001322870.921436

167HANDLE, OPERATING, 4, 5 & 6 IN WECO, MODEL 12N BUTTERFLY VALVE10000115012.5082110

168HANDLE B/F VALVE 2-3″3234078
3

POWER PACK & CONTROL PANEL PARTS.
169WOOD COUPLING SLEEVE
70.817931

170ELEMENT FILTER
70.814583

171ELEMENT FILTER
71.208313

172O-RING FOR ABOVE
70.334323

173HYD OIL PRESSURE GAUGE 5000 PSI
441.30695

174HYD OIL PRESSURE GAUGE 600 PSI
70.046963

175TEMP GAUGE 100 TO 250 DEG F
70.241124

176ELEMENT FILTER
70.06643

177TANK BREATHER
70.767122

178VALVE – SHUT-OFF – BARKSDALE – 133-R3-HM2 – 1/2 – 2-WAY
4.7121

179VALVE – NEEDLE – ALLOY STL – 3/4 FPT E11099 MARSH INSTRUMENT CO.FFG-N151FFG-N151670.068742

180VALVE – NEEDLE – ALLOY STL – 1/2 FPT E11099 MARSH INSTRUMENT CO.FFG-N151FFG-N1514
2

181VALVE
70.950172

182TACHO METER
70.793702

183VALVE ASSY 4 WAY AIR
70 939701

184TRANSMITTER COLUMBIAN MODEL 52
70.178113

185REGULATOR
70.382241

186CONTROL HYDRAULIC
70.780593

ROTORY ACTUATOR 70.84839
187PINION O- RINGR2-120-00
6

188PISTON SEALRS-297
3

189NYLON SLUGB8457-19
6

190ROCK BOLTHTR 009R03
1

191CYLINDER O-RINGR2-023-00
6

192O-RING END CAPR2-018-00
2

193TIE RODCH-C02528-0225
4

194ROCK BOLT O-RINGR2-009-00
6

195BACK UP RINGRT8-009-0
6

196RELIFE VALVEB 8266
2

197BEARING RETURNER O- RINGR2-136-00
6

198DRIVE COUPLINGB 8368
2

199GASKETB 8481
4

200DOWELL PINB 8370
2

CEMENT ACTUATOR PARTS 70.87220PARKER
201O-RING PINIONR2-222-00
6

202PISTON SEALRS-397
3

203NYLON SLUGB 8458-38
6

204O-RING CYLINDERR2-030-00
6

205O-RING END CAPR2-018-00
4

206O-RING ROCK BOLTR2-013-00
6

207O-RING BEARING RETIENERR2-231-00
6

MISCELLANEOUS PARTS
208DONKEY DICK RUBBER DIAPHRAM
444.009094

209RUBBER DIAPHRAM 1502
446.054154

210SAFETY VALVE
160.652

211TRANS OUT PUT SHAFT SEAL6773311130.041452

212OUT PUT SHAFT NUT TRANS
195.229621

213AIR REGULATOR 0 TO 30 PSI
70.241242

214AIR REGULATOR 0 TO 60 PSI
441.009151

215VICTALIC GASKET 2 INCH

6

216VICTALIC GASKET 3 INCH

20

217VICTALIC GASKET 4 INCH

20

218VICTALIC GASKET 5 INCH

10

219VICTALIC GASKET 6 INCH

10

220VICTALIC Coupling 2 INCH (Model 75)

1

221VICTALIC Coupling 3 INCH (Model 75)

13

222VICTALIC Coupling 4 INCH (Model 75)

7

223VICTALIC Coupling 5 INCH (Model 75)

5

224VICTALIC Coupling 6 INCH (Model 75)

4

225VICTALIC Coupling 2 INCH (Model 78)

2

226VICTALIC Coupling3 INCH (Model 78)

2

227VICTALIC Coupling 4 INCH (Model 78)

11

228VICTALIC Coupling 6 INCH (Model 78)

2

DATA MONITOR & MICRO MOTION DENSITOMETER
229Micro Motion Coriolis F‐Series Sensor; 3‐inch; 316L Stainless SteelF300S410F2BZEZZZZ
1

230Micro Motion 5700 Micro Motion Field Mount Transmitter5700R12ABZAZZZA
AZZAMV
1

231Supply, Erection, Installation, and commissioning of DATA Monitor (SYSTEM UPGRADATION)RETROFIT
1








SPECIAL TOOLS USED ON HT-400
1ADAPTER, TOOL, INSTALLATION STOP & SPRING RETAINER, CHANNEL, HT-400 FE100002989316.272651

2WRENCH, TEE, STOP & SPRING RETAINER, 5 3/4 HT-400 FLUID END100002983316.25761

3PUNCH, GUIDE BUSHING REMOVING, 4 IN HP HT-400 FLUID END100002910316.22771

4INSERTING TOOL ASSEMBLY, INSERT, #3, #4 & #5 LOC, TAB VALVES, HT-400 FE100009621316.22341

5TOOL, SEAL REMOVING, VALVE SEAT, HT-400, 3.38 IN100002865316.21801

6GUARD, SAFETY CHAIN, HYDRAULIC VALVE SEAT PULLER 340.390100003076340.39081

7RAM ASSEMBLY, HYDRAULIC, AC, VP, T-10, HT-400 & HQ-400 VALVE SEAT100007829340.390131

8PULLER ASSEMBLY, #4 FRAC VALVE SEAT, 4 & 4 1/2 HT-400 FE
316.227151

9TOOL, VALVE SEAT INSERTING, HT-400, 4.0, 4.5 IN100011709316.22591

10WRENCH, SOCKET, PLUNGER TIE BOLT, HT-400 PUMP FLUID END100002978316.25551

11PLUNGER REMOVING TOOL, HT-400 & T-10 FLUID END100002979316.255711

12INSERTING TOOL, TIE ROD HALF, T-10 & HT-400 PUMP100002803315.900331

13INSERTING TOOL, PLUNGER HALF, T-10 & HT-400 PUMP100002802315.900321

14WRENCH, PACKING NUT ADJUSTING, 5 3/4 HT-400 FLUID END100002977316.25541

15WRENCH, PACKING NUT ADJUSTING, CONSTANT TORQUE100058527316.255081

16DRIVE, PACKING NUT ADJUSTING, 5 3/4 HT-400 FLUID END100002985316.25781

17TOOL, PACKING INSERTING, HT-400, 3.38 IN100002864316.21741

18WRENCH, BOX, 2 IN 12 POINT, STRIKING FACE10003068770.640581

19BAR, TOOL, L/SPACER PLUNGER ADAPTER, HT-400100058374316.221731

20WIPER TOOL ASSEMBLY, PUSH ROD, L-SPACER, HT-400100002835316.210681

21WRENCH, LOCKNUT, HT-400 FLUID END & POWER END, FOR L-SPACER100002982316.257521

22GUIDE, PLUNGER CENTERING, 4 1/2 X 5 1/2, HT-400
316.225181

23TOOL, SLEEVE INSTALLING, HT-400, 4.0, 4.5 IN
316.229851
3
More
  1. Home
  2. About
  3. Products
  4. Repair
  5. Inventory
  6. Contact us
4
More
  1. DONGYING RIGTECH CO., LLC.
  2. No. 237, Dongying, Shandong, China, 257000
  3. Email: sales@chinarigtech.com
  4. Tel : +86 13705460915
  5. China, 257000
5
More
  1. Shipping Services
  2. FAQ
在线表单提交
More
Email

Receive all our news and updates

Telephone
E-MAIL
Contact Us：
+86 13705460915
No content
Word 500(limit 500 Character)
Technical Support： CLOUD | Admin Login
seo seo