MISSION mud pump

The MISSION mud pump is developed and produced by MISSION (Misen) in the United States and is suitable for cementing equipment. The SSION centrifugal pump mainly has several models such as 8611, 8614, 10814, etc., according to different drives Form, American MISSION mud pump can be divided into:

Motor + CVT American MISSION mud pump:

Main features: high speed regulation accuracy, large speed change range (speed ratio can be changed arbitrarily between 1:1.4-1:7), continuous operation, stable operation, stable performance, low noise, large torque, and infinitely adjustable flow. tune. However, its speed change needs to be adjusted manually, and the degree of automation is not high. It should not be used in situations where it may be overloaded or blocked.

Motor + fixed ratio reducer American MISSION sand pump:

Main features: strong carrying capacity, high efficiency, low vibration, low noise, low energy consumption, simple transmission mode, but due to its constant speed ratio, the flow rate is not adjustable.

Frequency conversion motor + frequency converter American MISSION sand pump:

Main features: large torque, high speed regulation accuracy, stable operation, stable performance, can realize automatic adjustment of rotation speed, ensure the arbitrary control of flow, and make up for the defect of the low degree of automation of the continuously variable transmission. The disadvantage is that the price of the inverter is higher.

The pressure of the American MISSION mud pump depends on the depth of the borehole, the resistance of the channel through which the flushing fluid passes, and the nature of the flushing fluid transported. The deeper the hole is drilled, the greater the resistance of the line and the higher the pressure required. With the change of the diameter and depth of the borehole, the displacement of the required pump can also be adjusted at any time. There is a gearbox in the pump mechanism or a hydraulic motor to adjust its speed to achieve the purpose of changing the displacement. In order to accurately grasp the changes of the pressure and displacement of the pump, a flow meter and a pressure gauge should be installed on the mud pump, so that the drillers can understand the operation of the pump at any time, and at the same time judge whether the condition in the hole is normal through the pressure change to prevent accidents in the hole.