| PONY ROD FOR MUD PUMP Crosshead Extension BOMCO Part Number: AH1301010409 |
| INSERT VALVE Insert Valve for F1600 Mud pump Fluid End – Material: NBR / PolyUrethane – Type of related valve: Full Open -BOMCO Part No.: AH36001-05.12A.00 | AH000002030103 |
| Valve Spring For Mud Pump P/N:AH1001010529 Parts shall be made by BOMCO or fully interchangable with BOMCO F1600 Mud Pump Parts Length: 12.3 cm Diameter: 5.5 cm Thickness: 5.5 mm |
|
| SEAT FOR MUD PUMP F1600 Type: Full Open CPTDC P/N: NB050401 – Sizeing System: Imperial (inch) – Technical Proposal shall contains Bomco Part schematic and list wich each requested part be determined in that. If vendor didn’t has mentioned part manual, drawing of all parts shall be sent with technical proposal. Requirements of technical proposal: – Manufacturer of parts shall be declared – If Manufacturer is not BOMCO, Drawing of all parts is required Requirements before delivery: – Certificate of Conformity with BOMCO F1600 Parts – Material Certificate |
| Ceramic LINER 6-1/2″ FOR MUD PUMP BOMCO F1600 P/N:, AH1301010525121 – Sizing System: Imperial (inch) – Technical Proposal shall contains Bomco Part schematic and list wich each requested part be determined in that. If vendor didn’t has mentioned part manual, drawing of all parts shall be sent with technical proposal. Requirements of technical proposal: – Manufacturer of parts shall be declared – If Manufacturer is not BOMCO, Drawing of all parts is required Requirements before delivery: – Certificate of Conformity with BOMCO F1600 Parts – Material Certificate – Visual Inspection and document review shall be done befor delivery |
| Ceramic LINER 7″ F/:MUD PUMP Mud Pump Make and Type: BOMCO – F1600 P/N: AH36001-05.23A.00 Mandatory Specifications: – Sizing System: Imperial (inch) – Technical Proposal shall contains Bomco Part schematic and list, wich requested part be determined in that. If vendor didn’t has mentioned part manual, drawing of all parts shall be sent with technical proposal. – Parts shall be made by BOMCO or fully interchangable with BOMCO F1600 Mud Pump Parts – If Manufacturer of offered Parts was not BOMCO Certificate of Conformity and material Certificate for each part shall be sent with technical proposal |
| 6 1/2″ Piston Assembly for F1600 Mud pump Fluid End -BOMCO General Part Number (All Size): AH130102050800 |
| PISTON 7″F/:MUD PUMP Make and Model:BOMCO – F1600 7″ Piston Assembly for F1600 Mud pump Fluid End BOMCO Piston General Part No.: AH130102050800 Mandatory Specifications: – Sizeing System: Imperial (inch) – Technical Proposal shall contains Bomco Part schematic and list wich each requested part be determined in that. If vendor didn’t has mentioned part manual, drawing of all parts shall be sent with technical proposal. – All Parts shall be made by BOMCO or fully interchangable with BOMCO F1600 Mud Pump Parts – If Manufacturer of offered Parts was not BOMCO Certificate of Conformity and material Certificate for each part shall be sent with technical proposal |
| asket Liner Mud Pump F1600 BOMCO Mud Pump P/N: AH1301010512 date of production should be declared |
| RUBBER PISTON 6 1/2 BOMCO F1600 Material:NBR/HNBR/PU date of production should be declared |
| RUBBER PISTON FOR PISTON 7 inch Rubber Piston for 7″ Piston Assembly C/W: Related O-ring Material:NBR date of production should be declared |
| Flashboard Assembly for F1600 Mud pump Fluid End – Bomco Part Number: AH130101050400B2 |
| Brass Of Flash Board Copper block for Flash Board Assy (Brass Piece Only) – Mud Pump Brand and Model: BOMCO F1600 – Mud Pump manufacturing Date: 2008-11 – Part Number (Flash Board Assy): AH130101050400 |
| Diaphragm of PULSATION DAMPENER (bladder) – Mud Pump Brand and Model: BOMCO F1600 – Mud Pump manufacturing Date: 2008-11 – Part Number: AK7535010200 – Material: NBR – Production Date: Less than 6 months at delivery |
| Cylinder Cover Seal- F1600 BOMCO part no: AH1301010510 Material:NBR |
| WEAR PLAT FOR MUD PUMP – BOMCO F1600 Part Number:AH1301020503 |
| valve Cover Mud Pump – BOMCO F1600 P/N:AH130102-0502 |
| Valve guide lower BOMCO F1600 BOMCO Part Number: AH130101050500 Mud Pump Model: BOMCO F1600 |
| Cylinder head plug BOMCO F1600 BOMCO Part Number: AH130101050600 Mud Pump Model: BOMCO F1600 |
| Locating Plate BOMCO F1600 (alignment ring) P/N : AH103101-0507 |
| Cylinder head Seal BOMCO F1600 BOMCO Part Number: AH1301010508 Mud Pump Model: BOMCO F1600 date of production should be declared in offer |
| PISTON ROD FOR MUD PUMP P/N:AH1301020504 |
| LINER LOCK RING MUD PUMP Bomco F1600 P/N: AH1301010518 |
| Liner lock BOMCO F1600 BOMCO Part Number: AH130101051500 Mud Pump Model: BOMCO F1600 |
| O-Ring 200*7 BOMCO F1600 BOMCO Part Number: 530301012000070007 Mud Pump Model: BOMCO F1600 |
| Piston Rod Clamp Bomco F1600 P/N: AH106102050600 |
| Valve guide upper BOMCO F1600 BOMCO Part Number: AH1001010510 Mud Pump Model: BOMCO F1600 |
| Valve guide retainer BOMCO F1600 BOMCO Part Number: AH1001010512 Mud Pump Model: BOMCO F1600 |
| Piston seal BOMCO F1600 BOMCO Part Number: AH1001010515 Mud Pump Model: BOMCO F1600 |
| Piston nut BOMCO F1600 BOMCO Part Number: T501-303.0 Mud Pump Model: BOMCO F1600 |
Telephone
E-MAIL