|
7-22-0-9 CANRIG top drive spare part Top drive
| M20-1030-010 KIT, BOLT, SPARES | | 829-18-0 PLATE, RETAINING, BUW | | F451JSJ7080808-51.07-X-48 HOSE ASSY, 1/2, SWV STR, 45° ELL, 51.07 | | F381JSJS121212-85.75-X-82 HOSE ASSY, 3/4, SWV STR, SWV STR, 85.75 | | FS-0625NC-0350 CAPSCR, FLAT HD SOC, 5/8-11 UNC x 3.50 | | C10064 HEAT SHRINK, 1 1/2 IN, RED | | Amsu-1-7 NON-FLfX, 77 FT., TD-HW, MAH-HW | | H16-1301-12 HOSE, HP SAE 100R2, 3/4, 2250 psi | | SH-1000NC-0550-W CAPSCR, HEX SOC HD, 1-8UNC x 5.50 | | M15-1002-010 GEARBOX | | LW-1000-ET LOCKWASHER, 1 EXTERNAL TOOTH | | HH-0500NC-0250-GR8-W CAPSCR, HEX HD, 1/2-13UNC x 2.50, GR8, W | | 602-14 SPLINED SHAFT | | 690-11-0 HYDRAULIC CYLINDER | | RH-P-8-32-0200-SS ROUND HEAD, MACH SCREW, # 8-32UNC X 2.00 | | 742-52-0 BEARING INNER RACE | | E16-1101-010 END BRACKET, TS 35 RAIL | | 7-22-0-9 CANRIG top drive spare part | | HH-0375NC-0150-GR8-W CAPSCR, HEX HD, 3/8-16UNC x 1.50, GR8, W | | M12-1006-010 GREASE NIPPLE, 1/8 NPT, 45 DEGREE | | E05-1013-010 RECEPTACLE, MALE, WHT, 2 HOLE BUS BAR | | SB12-1375NC-0400-W SUPER BOLT, 1 3/8-6UNC x 4.00, SB12 | | S10075 SEAL | | M19-3009-010 FERRULE, 1/8, OVAL, ALUMINIUM | | H03-1024-010 VLV, HYD, DIR, 2 POS, 4 WAY, D03 | | E01-1013-010 MOTOR, AC, 20 HP, 575V, 1750 RPM | | 681-25-0 RETAINER, BEARING | | 685-18-0 COVER, BOTTOM INLET, GE 752 | | F451JSJS080808-68.4-X-66 HOSE ASSY, 1/2, SWV STR, SWV STR, 68.4 | | DT12313 TRACK, SPACER, SECTION 5, TELS | | DT12866 FACE PLATE, CIP, SH | | H15-520601-12 UNION, BULKHEAD, MALE 3/4 ORFS | | E10536 TERMINAL, GND, DBL, COMBI-FT, 24-12 AWG | | SCHEMATIC, HYDRAULIC SC10019 | | AY11SBB-1-1 FLEX. 77 FT.. TD-Hi MAST-H# | | TG-038 TORQUE GUIDE, RIG SPECIFIC INTERFACE | | E03-1019-010 CABLE, 4C #8 AWG, 600V, GENERIC | | 685-29-0-250 SHIM, 0.250, DRILLING MOTOR | | H15-1027-010 QUICK PRESS NIP, 3/4 BDY, FEM 3/4 NPT | | H15-3004-12-12 HOSE FTG, ELL 90°, 3/4, FEM SWV 3/4 ORFS | | 685-22-0 COVER, TOP, GE 752 | | M03-1002-020 COUPLING ELEMENT | | AY12464 KIT, MOUNTING, AIR COND, FRIEDRICH, TDSU | | 685-29-0-015 SHIM, 0.015, DRILLING MOTOR | | H15-070202-12-12 ELL 90°, MALE 3/4 JIC, MALE 3/4 NPT | | F451JSJ9081208-69-X-66 HOSE ASSY, 1/2, SWV STR, 90° SHT, 69 | | H15-090136-16-12 REDUCER, MALE 1 ORB, FEMALE 3/4 ORB | | P08-1000-010 BREATHER | | F301JSJS040404-108.64-X-106 HOSE ASSY, 1/4, SWV STR, SWV STR, 108.64 | | E04-2030-010 CONDUIT FTG, FLEX METAL, STR, 1 1/4 NPT |
|
|
Telephone
E-MAIL