| GB/T5781-2000 Bolt: M12x30 |
| JC135.10.04.00 Hinged plate |
| JC135.10.11 Cover plate II |
| JC135.05.14 Bearing cover II |
| JC135.04.01 Lifting bail |
| GB/T91-2000 Split pin: 4×50 |
| GB/T6178-1986 Slotted nut: M24 |
| GB/T93-1987 Washer: 30 |
| GB/T276-1994 Bearing: 6313 |
| JC135.02.27 O-ring: ф914х5.3 |
| JC135.04.17.00 Brake air cylinder seat |
| JC135.03.11.00 Drum body |
| GB/T93-1987 Washer: 20 |
| JC502.02.11 Screw plug: M20x1.5 |
| JC135.04.19.00 Riding wheel device |
| JC135.03.01 Shaft end cover plate |
| JC135.04.25 Gasket: ф50 |
| JC135.02.17.00 Right bearing housing |
| GB/T5783-2000 Bolt: M12x20 |
| GB/T91-2000 Split pin: 8×90 |
| JC135.03.20 Shaft sleeve: L=38 |
| GB/T93-1987 Washer: 16 |
| JC135.02.03 Key: 45x45x225 |
| JC018.05.28 Spacer sleeve: ф65^25 |
| GB/T91-1986 Split pin: 5×50 |
| JC135.02.32 Gasket: 61 |
| JC135.03.12 Shaft |
| GB/T5782-2000 Bolt: M10x80 |
| JC135.10.06 Gasket: 61 |
| JC135.02.22 Shaft sleeve: f190xf220x55 |
| GB/T5783-2000 Bolt: M10x20 |
| JC135.04.08 Gasket: ф37 |
| JC135.04.05 Eyelet bolt: M56x4 |
| GB/T3081-82 Iron wire: ф2 |
| JC135.02.31 Adjusting gasket: 60.25 |
| JC018.0 5.26 Shaft end cover plate |
| JC135.03.18 End cover plate of shaft (right) |
| GB/T93-1987 Washer: 12 |
| JC065.02.09.01.00 Riding wheel bracket (left) |
| JC065.02.09.07 Pin: 25×120 |
| JC018.05.25 Bearing cover |
| GB/T86-1986 Rivet: 12×46 |
| JC135.03.06 Frame bearing box |
| JC135.03.22 Left bearing cover |
| Q11F-16 Stainless steel ball valve: NPT1 |
| JC135.03.14 Right bearing cover |
| JC135.10.10 O-ring: ф3.55 |
| JC018.0 5.29 Bearing cover |
| GB/T91-1986 Split pin: ф5 |
| GB/T288-1994 Self-aligning roller bearing: 2226CC/W33 |
Telephone
E-MAIL