Home >> Inventory >>China Warehouse >> KHT5500-71 KHT5500.1.9-4 Alignment shaft Drill pipe power tongs

Details

KHT5500-71 KHT5500.1.9-4 Alignment shaft Drill pipe power tongs

TQ245/20 Casing Power Tong is used to make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation.

Characteristics:

Opening type, convenient and prompt to enter and slide off the working position, with an integral tong head of great strength and rigidity
Double swing head jaws, convenient to assemble and disassemble. The design of best cutting diameter can ensure the reliable clamping and easy back climbing;
Brake belt assembly, easy to operate and convenient to maintain and replace;
Opening gear supporting structure, improving the strength and rigidity;
Wholly hydraulic mode and mechanical gear shift，simple and reliable structure.
Manganese steel plate used on the shell，increasing the strength. The jaws are cast with precise technology, artistic and strong.
With hydraulic torque indicator and also installation interface, convenient to realize the computer management.

KHT5500-282(2) KHT5500.2(2) .1.1(1-7) Front jaw set assembly

KHT5500-86 Spring washer 5/8″

01.02-08M Upper case

KHT5500-76 Hexagon bolt 3/8″x1/2″

KHT5500-57 KHT5500.1.1.1-1 (6) Rear Jaw Plate 6 (2 3/8″)

Pipe oil power pliers accessories XYQ6B safety door shaft

KHT5500-386 KHT5500.2 (2) .5-1(7) Rear jaw plate7 (2 3/8″)

Oil power pliers accessories XYQ6B power tube seat 55B.Z-

KHT5500-202 KJD9625.18.1 Bend sub (9/16-18UNF)

KHT5500-390 KHT5500.2(2).4 Backup Tong Safety door assembly

KHT5500-197 KJD9625.18-3 Right-angle connector (NPT1/2-3/4-16UNF Flared type)

KHT7625-506 GB/T882 Pin shaft B25x90

GB/T70.1-2000 Screw M12X30

KHT5500-351 KJD9625.Q-2 Washer

Pipe oil power pliers accessories retaining ring A40*3.1

KHT7625-510 Hex nut 1/2”

KHT7625-423 GB/T882 Pin shaft 8×25

KHT5500-76 Hexagon bolt 3/8″x1 1/2″

01.02-33M Connection pillar

KHT7625-859 GB/T 15242.2 Support Ring GD 1250B-IIA

KHT5500-469 KHT5500.2 (2) .3-4 Pin shaft (2)

Tubing power pliers accessories XQ89/3YC main pliers jaw plate XYQ3C.Z.1-11

Pipe oil power clamp fittings pressure gauge 16-60KN.m

KHT5500-462 GB/T10708.1 YO-RingY63x53x6.3

KHT7625-80 Spring washer3/855

KHT7625-71 KHT8625.1.1.1(7) Jaw set (7)4 ]/2〃

01.01-23M I Steel plate

KHT7625-422 GB/T91 Cotter pin3.2 16

01.01-42M Pin

01.02-05M Idler shaft

GB/T118-2000 Pin 20X60

KHT5500-354 Hexagon bolt 1/2″x3 1/2″

KHT7625-233 GB/T305 Stop ring 72/78.2

01.01-37M Notched gear

Hydraulic pliers with pipe taper end fastener hole M8T5

KHT5500-151 XYQ12.Z-27A Support ring (2)

KHT5500-48 KHT5500.1.1.1-1 (6) Front Jaw Plate 6 (2 3/8″)

01.01-09M “80 roller (8”)

KHT7625-722 KHT5500.1.15C.1-4 Rotary plate

KHT5500-150 Check nut 5/8″

KHT5500-71 KHT5500.1.9-4 Alignment shaft

KHT5500-07 Spring washer 1/2″

KHT5500-24 (6) KHT5500.1.1.2 (6) Rear jaw plate assembly (2 3/8)

KHT7625-750 KHT9625.2.1B Clamping arm

KHT5500-110 KHT5500.1.3-2 Small intermediate wheel

KHT5500-50 Hexagon socket head cap screw 1/2″x1″

Pipe oil power pliers accessories shaft XYQ6B.B-7

KHT5500-61 KHT5500.1.1-6 Connection plate

KHT7625-93 KHT8625.1.1.1-2 Roller

Oil pipe power tong accessories safety door assembly XYQ6B.Z11.5

LastKHT7625-791 KHT9625.2-1B TurniNextKHT5500-81 KJD9625.16 Measurin