|
GH3101-05.00 Fluid end assembly for Honghua HHF-1000
Drawing No. | Name |
|
| GH3101-05.01.00 | Cylinder assembly |
|
| GH3101-05.02 | Stick, liner cover flange |
|
| GH3101-05.03 | Stick, liner cover |
|
| GH3101-05.04 | Liner locking Ring |
|
| GH3101-05.05 | Cylinder cover plug |
|
| GH3101-05.06 | Puller & pusher |
|
| GB/T3452.1-1992 | O ring：97.5×3.55G |
|
| GH3101-05.07 | Closure plate, discharge let：5 1/8" |
|
| GH3101-05.08 | Discharge manifold |
|
| GH3101-05.09 | Seal ring for valve cover |
|
| GH3101-05.10 | bolt：1 1/2-8UN-2A×262 |
|
| GH3101-05.01.03 | Nut：1 1/2-8UN-2B（SPL） |
|
| GH3101-05.11 | Valve cover |
|
| GH3101-05.12 | Valve rod guide device |
|
| GH3101-05.13.00 | Spring guide |
|
| GH3101-05.14 | Baffle |
|
| GH3101-05.15 | Bolt：3/8-16UNC-2A×20 |
|
| GB/T4240-1993 | Stainless steel Wire ： φ 1.60 |
| （L=1830） |
|
|
|
| GH3101-05.16 | Short connector |
|
| GH3101-05.17.00 | Valve assembly（API 6#） |
|
| GH3101-05.18.00 | Piston nut |
|
| GH3101-05.19.00A | Piston |
|
| GH3101-05.20 | Seal ring, piston |
|
| GH3101-05.21 | Piston rod |
|
| GH3101-05.22A | Ordinary liner | GH3101-05.22 | Double metal liner |
|
|
|
| GH3101-05.23.00 | Spraying pipe assembly |
|
| GH3101-05.24.00 | Clamp assembly |
|
| GH3101-05.25 | Liner end cover |
|
| GH3101-05.26 | Fixing clamp |
|
| GH3101-05.27.00 | Valve rod guide |
|
| GB/T3452.1-1992 | O ring：190×7.0G |
|
| American standard（item | Bolt：7/8-9UNC-2A×55 | （item 32） |
| GH3101-05.28.00 | Suction manifold | GH3101-05.29.00 | Suction damper |
|
| GH3101-05.30.00 | Shim set |
|
| American standard（item | Bolt：1 1/16-8UN-2A×90 | （item 36） |
| American standard（item | Nut：1 1/16-8UN-2B（SPL） | （item 37） |
| GB/T3452.1-1992 | O ring：345×7.0G |
|
| GH3101-05.31 | Suction flange（Ⅰ） |
|
| GH3101-05.32 | Suction flange（Ⅱ） |
|
| GN3101-05.33 | Screw plug：NPT1 1/2 |
|
| GH3101-05.34 | Washer ：39 |
|
| GH3101-05.35 | Plug, suction let：12" |
|
| 277 | Sealant |
|
|
Telephone
E-MAIL