|
Supply parts for drilling rig ZJ50/3150D
Model | ZJ50/3150D | Nominal Drilling Depth (m) | 5000m with 114mm Drill Pipe - 4500m with 127mm Drill Pipe | Max Hook Load (kN) | 3150 | Number of Lines of Hoisting System | Max.12 | Diameter of Wireline | 35(1 3/8”) | Max. Pull of Fast Line (kN) |
| Model of Drawworks | JC-50D/GE752AR32 | Rated Power of Drawworks (kW) | 1100KW(1500HP) | Speed of Drawworks | - | Main Brake of Drawworks | Disc Type of Brake | Auxiliary Brake of Drawworks | Electromagnetic Brake : DS-50 | Crown Block | TC4-315 - BOMCO | Traveling Block | YC-315 - BOMCO | Hook | DG-315 | Model of Swivel | SL450 - Lanzhou | lD of Swivel System (mm) | 75 | Model of Rotary Table | ZP375 - Lanzhou | Diameter of Opening of Rotary Table | 952.5mm (37½) | Speed of Rotary Table | 4 Forward + 2 Reverse / 2 Reverse | Model×Number of Mud Pump | F-1600×2 | Power of Each Mud Pump | 1180KW (1600hp) | Drive Mode of Mud Pump | Two DC motors for each Mud Pump | Type of Mast | JJ315/45-K4 - BOMCO - 500 tons | Working Height of Mast | 45 meters | Height of Drilling Floor | 9 meters | Clear Height of Drilling Floor | 7.7 meters |
Parts list Lock pawl—left | 105.06.01 | Lock pawl—right | 105.06.02 | Pin,handle lock pawl | 105.06.03-1 | Grease fitting |
| Grease fitting | GB1152-89 (M10x1) | Pin,lock pawl | 105. 08. 10-1 | Plug | 105.06.05 (1/8") | Screw, hex soc hd | 105.06.10.00 | Grease fitting | GB70-85 (M24x75) | Plate, I.D | 105.08.20 | Screw | GB67-85(M4x8) | Dipstick, oil | 105.08.30.00 | Plug | 105.06.07 (1 1/2") | Housing | 105.08.20.00 | Tongue | 105.06.08 | Cover | 105. 08. 10. 00 |
Table installation | 105.08.40.00 | Ring gear (sprial teeth) | 105.08.40.11 | Table | 105.08.40.02 | Bearing | 2687/1049 | Columnar pin | 105. 08.40. 03 | Support, bearing | 105. 08.40. 04 | O-Ring | 105.08.40.05 | Screw | GB70-85(M24*60) | Washer, spring | GB93-87(24) | Shim | 105.08.40.06 | Shim | 105.08.40.07 | Shim | 105.08.40.08 | Lock pawl | 105.08.02 | Pin | 105.05.19 |
Pin,cotter 5X36 | GB91-86(5*36) |
Kelly bushing instal1 at ion | 105.54.00(2 3/8"-8 5/8") | Kelly bushing | 105.54.01 | Board | 105.54.02 | Pin | 105.54.03 |
Shim | 105.08.08 | Pinion shaft assembly | 105.08.50.00 |
Screw | GB5783-86(M16X35) | Washer, spring 16 | GB93-87(16) | SIinger | 105.08.09 |
Sprocket retainer | 105.08.14 | Flange | 105.08.15 | Main kelly bushing installation | 105.08.07.00 | Main kelly bushing | 105.08.70.04 | Spacer | 105.08.70.02 | Board | 105.08.70.03 | Sorew | 105.08.03 | Nut | 105.08.04 | Washer,spring 28X35X2 | D3-3-67(28*35*2) | Valve DN32 (1 1/4") | GB8465.1-87 | Joint R11/4 | GB3289.26-82 | Kellybushing 20" | 105.08.21 |
Pinion shaft assembly | 105.08.50.00 |
|
|
| 105.08.50.12 |
|
| End-plate of bearing | 105.08.50.09 | Bearing | GB283-64 (32630) | O-Ring | 105.08.50.02 (470*8.6) | Spacer | 105.08.50.04 | Drain plug 1" | 105.06.60.00 | Drain plug 1" | 105.06.60.01 (1") | Magnet | 105.06.60.02 | Pin,cotter 2X12 | GB91-86 (2x12) | Shaft, pinion | 105.06.50.03 | Bearing | GB286-64 (3630) | Screw | GB5783-86 (M20X60) | Screw |
| Screw |
| Washer,spring 20 | GB893-87(20) | Washer,spring 20 |
| Washer,spring 16 |
| Shim | 105.08.50.05 | Capsule | 105.08.51.00 | Shim | 105.08.50.06(Ø400/322) | Seal，oi | D7-1-67(180*220*15) | Retainer, pinion end | 105.08.50.07 | Retainer, pinion end |
|
|
| Nut, pinion shaft |
| Pinion shaft housing | 105.08.50.10 | Key | 105.08.50.08 | Sprocket retainer | 105.08.50.11(150) | Screw with head holes |
| Screw with head holes |
| Screw with head holes | GB32.1-88(M16*35) | Wire |
| Shim |
| Shim |
| Screw with head holes | GB32.1-88 |
|
|
Telephone
E-MAIL