HT-400 Pump parts

Item Description (w Model / p/n)

1 ADAPTER REMOVAL, FRAC VALVE HT-400 ;

Part Number:(100058373) 316.22172;

Manufacturer: HALLIBURTON Co.

2 PANEL ASSEMBLY FOR HT-400 P/N:

100003480 (458.81337); Manufacturer:

HALLIBURTON Co.

3 VALVE, HT400, 4.5 IN, FTAC; Part Number:

100002875 (316.22048); Manufacturer:

HALLIBURTON Co.

4 BOOT SUCTION STOP; Part Number:

100002972 (316.25233); Manufacturer:

HALLIBURTON Co.

5 LNR, TWO PC BSHG, V GID, HT400, #4 FRAC,

BRS LINER, TWO PIECE BUSHING, VALVE

GUIDE, HT 400, #4 FRAC; Part Number:

100002868 (316.22005); Manufacturer:

HALLIBURTON Co.

6 NUT 1-14 NF INTERNAL WRENCHING 1.03

THREAD LENGTH P/N: 100002811 (316.11621);

Manufacturer: HALLIBURTON Co.

7 O-Ring, 90 Duro, 1 7/8 x 1 5/8 x 1/8, 568-223

P/N: 100000959 (8.34020)

8 Retainer, Push Rod, HT 400, TWO PIECE NOSE,

LSPACER P/N: 100002833 (316.21066)

9 PUSH ROD, TWO PIECE, L-SPACER, HT 400

P/N:100002832 (316.21065)

10 RETAINER PUSH ROD SEAL HOUSING L4

SPACER HT 400 P/N: 100002818 (316.14070)

11 STUD ATTACHING FLUID END TO POWER END

L SPACER HT 400 P/N 316.24923

12 RETAINER STOP AND SPRING HT 400, No 4

SUCTION VALVE, MACH. CAST P/N:100058432

(316.23034)

13 INSERT VALVE HT 400 No 4 FRAC, URETHANE,

ACID/FRAC SERVICE (YELLOW) P/N:

101333104 (316.22046)

14 SEAT VALVE TAPPERED; P/N: 100002874

(316.22047); Manufacturer: HALLIBURTON Co.

15 O-ring, 90 Duro, 4 1/2 x 4 1/4 x 1/8, 568-244;

P/N: 100000970 (8.34041) Manufacturer:

HALLIBURTON Co.

16 RETAINER COVER HT 400 4.0″ P/N: 100007820

(316.2202); Manufacturer: HALLIBURTON Co.

17 COVER DISCHARGE DOUBLE GUIDED VALVE

HT-400 4.0” AND 4.5” P/N: 100002938

(316.23091) Manufacturer: HALLIBURTON Co.

18 F CAP SEALS; Part Number: 100002878

(316.22052); Manufacturer: HALLIBURTON Co.

19 RETAINER PROTECTIVE CYLINDER HEAD

COVER 4.5” P/N:100007823 (316.23639)

Manufacturer: HALLIBURTON Co.

20 RING (SPACER/NO. 4 DISCH VALVE AND CYLHEAD

COVER 4 FOR HT/400 PUMP), Part

Number: 100002877 (316.22051), Manufacturer:

HALLIBURTON Co.

21 NOSE, PLUNGER, MACHINED, IN: 4″1/2; Part

Number: 100002941 (316.2331); Manufacturer:

HALLIBURTON Co.

22 4 1/2″ Seal, Plunger Nose Assembly HT400 P/N:

100002940 (316.2330) Manufacturer:

HALLIBURTON Co.

23 PLUNGER, HARD SURFACE, L-SPACER, 4″1/2

FOR HT-400 PUMP; Part Number: 100002937

(316.23085); Manufacturer: HALLIBURTON Co.

24 SEAL (LUBE PACKING, WQ 4″1/2 X 5″1/2 X

9/16″); Part Number: 100002946 (316.23395);

Manufacturer: HALLIBURTON Co.

25 O-Ring, 90 Duro, 5 1/2 x 5 1/4 x 1/8 568-252;

P/N: 100002019 (70.34049) Manufacturer:

HALLIBURTON Co.

26 Carrier SEAL AND PACKING, 4″1/2; Part Number:

100002944 (316.23391) Manufacturer:

HALLIBURTON Co.

27 Adapter, Female, 4.500, PEEK, CDI; P/N:

101377663; Manufacturer: HALLIBURTON Co.

28 Packing, 4.50, CDI WSP1, PTFE; P/N:101377661

Manufacturer: HALLIBURTON Co.

29 Header Ring, 4.50, HNBR, CDI; P/N: 101377660;

Manufacturer: HALLIBURTON Co.

30 Spacer, 4.50 in., Fluid End, CDI; P/N:101377659

Manufacturer: HALLIBURTON Co.

31 Seal,Packing Lube, Z20, 4 1/2 x 5 x 9/16 Zurcon

UCUP, Double Lip FE; P/N: 100058388

(316.22397) Manufacturer: HALLIBURTON Co.

32 RING, BACKUP, PACKING, 4″1/2; Part

Number:100002945 (316.23393); Manufacturer:

HALLIBURTON Co.

33 Packing Set, 4 1/2 x 5 1/2 x 0.50 Stock HT, 3

rings, Hard, Acid Service; P/N:100002951

(316.23525) Manufacturer: HALLIBURTON Co.

34 ADAPTER FOR HEADER RING (4″1/2×5″1/2);

Part Number:100002948 (316.23503);

Manufacturer: HALLIBURTON Co.

35 Adapter, Header Ring, 4 1/2 x 5 1/2, HT-400™,

FE P/N 100002949 (316.23505) Manufacturer:

HALLIBURTON Co.

36 Spacer, Inner, Discharge Passage Seal, HT-

400™, 5.75 in. P/N: 100002974 (316.2545)

Manufacturer: HALLIBURTON Co.

37 Seal, Discharge Passage, HT-400™, 3.375 in.

O.D. P/N: 100002975 (316.2547) Manufacturer:

HALLIBURTON Co.

38 O-Ring, 90 Duro, 5 1/4 X 5 X 1/8, 568-250

P/N:100000975 (8.34047); Manufacturer:

HALLIBURTON Co.